Applications: This set can be used for extruding thermo-plastics such as soft hard polyvinyl chlorid (PVC) and polystyrene (PE). Coordinated with the appropriate auxil-iary machine, (including the head of former), it can produce many kinds of plastic products such as film pipe, board, braid, belt as well as granule. Features: This set is advanced in design, high in output, good in plasticization and low in energy consumption, The involute gear driving is characterized by low noise, stable working, big bearing capacity and long service life.
Specification:
Screw Diameter: D15- D 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Ciptadent Care is the newest series of toothbrushes from Ciptadent. With an improved brush handle shape, this series has a combination of two toothbrush bristle materials which will make the tooth brushing process more effective and more stable. Ciptadent Care comes with a combination of two types of toothbrush bristles and a slimmer brush head shape.
Available in 2 variants :
- Complete Care
- Perfect Care
size: -single 72 pcs -family (3pcs) x 6 pack/ctn-6ctn/box
4444 Se Series Single Screw Extruder Suppliers
Short on time? Let Se Series Single Screw Extruder sellers contact you.
The Ciptadent Charcoal Protection toothbrush series has now been refined with a new brush handle shape, which is more effective in the process of brushing teeth. The combination of the two colors makes the shape of the Ciptadent Clean toothbrush handle look more attractive. Tested and developed in Japan, and technically proven to be able to work optimally and effectively in cleaning teeth.
The Ciptadent Classic toothbrush series has now been refined with a new brush handle shape, which is more effective in the process of brushing teeth. Ciptadent Classic comes with a brush head shape and bristle formation that has been clinically tested and developed in Japan, capable of working optimally and effectively in cleaning teeth.
Available in 2 variants:
-Regular (soft & medium)
-Double Action (soft & medium)
size:
-single 72 pcs
-family (3pcs) x 6 pack/ctn-6ctn/box
This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.
Circular Stapler, 31 mm Size, Green, Titanium (Staples), Circular, 22 or 35 cm Shaft Length, Squeeze Handle, DST Series Staple Technology, Tilt-Top Anvil Stapler, 4.8 mm Open Height, Single-Use, Sterile
Quality Copper Cathode Grade A Purity Cathode Copper 99.99%
Copper Cathode/copper Cathodes Price
Copper Cathode Grade A
Purity: Purity 99.97% - 99.99% Min
Specifications
Competitive & Reliable Price
Excellent Customer Service
Outstanding Delivery Reliability
1. Typical Specifications -
Product: Copper Cathodes Grade A (electrolytic Copper Grade)
(lme Standards) Standard Cu Cathode-1, Purity 99.99%
Dimension: 914mm X 914mm X 12mm (lme Standards)
Weight Of Each Sheet: 125kgs (+/- 1%)
Net Weight Of Each Pallet: 2mts (+/- 1%)
Min. Weight In Each Container: 20mts Approx.
Gross Weight Of Each Container: 22.20mts Approx.
Packing: Palletized Banded By Aluminum Bands
2. Chemical Composition
Copper (cu) : Min% 99.99%
Other Materials May Be Present Which Are Described Below:
Oxygen O2 --
Sulfur S:.............................. 4 Ppm
Iron Fe:..............................2 Ppm
Silver(argent) Ag::..............................10 Ppm
Lead Pb:..............................0.2 Ppm
Nickel Ni:..............................0.2 Ppm
Selenium Se:..............................0.3 Ppm
Antimony Sb:..............................0.1 Ppm
Silica Si:..............................0.3 Ppm
Cobalt Co:..............................0.2 Ppm
Arsenic As:..............................0.1 Ppm
Bismuth Bi:..............................0.1 Ppm
Manganese Mn:..............................0.1 Ppm
Tellurium Te:.............................. 0.05 Ppm
Aluminum Al:.............................. 0.5 Ppm
Magnesium Mg:.............................. 0.4 Ppm
Zinc Zn:.............................. 0.4 Ppm
Packaging: Steel Belt Packed, Single Bundle Weighs About 2500 Kilograms.
Hts Code 7403.11
Price = Us$ 5,400 Cif
Origin: South Africa
Min Order: 50 Tons
ZLYJ Series Gearboxes for Plastic and Rubber Single Screw Rod Extruder is a kind of special reducer researched
and developed by importind the most advanced technology of the hard teeth-surface in the world. For recent ten years, they
are widely used in top and middle grade plastic, rubber and chemical fiber extruders, sell well in the country and are exported
abroad. With a higher reputation in the industry, it has features as follows:
1. The whole machine looks beautiful and liberal, and can be used both vertically and horizontally. It can suit multiple
requirement of assembling.
2. The gear data and box structure are optimally designed by the computer. The gears are made of top grade low carbon
alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the
teeth surface is 54 - 62 HRC. The gear pair has stable running, low noisy and has high driving efficiency.
3. The assembling connector has the precision of radial run-out and end face run-out at international level, and can be
easily connected with screw rod of the machine barrel.
4. The bearing structure of the output shaft has a unique style, which can effectively prolong service life of the bearings.
5. All standard parts such as bearing, oil seal, lubricant oil pump etc. are all top quality products selected from domestic
famous manufacturers. They can be also selected from imported products as per requirement of customer.
Screws can be selected from ordinary, gradual, mutational, pinned, shielding, separating and exhausting types. The compression ratio of screw can be designed according to different raw materials and requirements of clients.
This machine is suitable for PE, PP, ABS, PA and some thermoplastics, pelletizing method: pulls strap pelletizing, water-ring rubs surface pelletizing, wind-cooling rubs surface pelletizing and underwater pelletizing.
Specification:
Screw diameter: d15- d 300
L/d ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc.
SJ scries of single-screw rod extruder is outfitted with all kind of screws which applies for processing PVC, PE, PPR, and PEX material, etc. It has such features as high speed revolution, even plasticization, high output, and small and beautiful shape with the devices of air expelling and water cooling, temperature auto-control and stepless speed regulation. The extruders are equipped with several kinds of machine head and auxiliary machine which are suitable for processing thermoplastic products such as membrane soft(hard)pipe, rod, board, sheet and so on.
Premium apple products, including macbook pro, macbook air, imac, mac mini, ipad (11th gen), ipad pro m4 (11"/13"), ipad mini 7, and iphones (13 to 16 pro max). we also supply apple watch ultra 2, series 10, se (2nd gen), airpods (4th gen, pro 2nd gen, max), homepod (2nd gen, mini), and apple pencil.
other brands & categories
laptops and desktops from hp, dell, lenovo, asus, and acer, along with dji drones and a wide range of peripherals and accessories to meet diverse market demands..Export
