Extruder Screw

Screw diameter: 35mm-200mm Length: less than 10000mm Barrel diameter: 35mm-200mm Material: 38crmoala; skd61; skd11; 40cr; 42crmo; high quality alloy steel Technology for tin coated screw barrel/: nitriding treatment, alloy coating spraying, heat-treatment, quenching Appliance for tin coated screw barrel/: pa, evoh, eaa, pc etc

Specification: Screw diameter: d15- d 300 L/d ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case

This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.

Specification: Screw Diameter: D15- D 300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950HV Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing Oil Coated& Film Wrapped in Wooden Case

Wood-plastic Composites (WPC) is a kind of new composite material which is booming at home and abroad in recent years. With the continuous development of new environmental protection industry, people have higher and higher requirements on environmental protection. As a new environmental protection material, wood-plastic has been applied more and more widely in the field of home decoration. Our company designed WPC floor extrusion production line for the development of the floor special equipment, mainly used for the wood-plastic floor with width 955mm, thickness of 3-5mm. The features of WPC floor: light weight, sound absorption, waterproof, moisture-proof, insect-proof, termite proof, high environmental protection, no pollution, recyclable, high fire resistance, effective flame retardant, low transportation cost, simple and convenient installation.

Lab twin-screw extruder can value the processing materials by test the small amount, especially for hand sample evaluation for mass production, new formula research and development and pre-screening for pre-mixing materials. It can completely show the materials like color, surface, light, ingredient, properties and so on.Gongle small extruder can equip the PLC control and touch screen and completely record the data and its change. And it is the best choice for various institutes labs in universities and research institutes. Normal two size for lab twin screw extruder Type NoSeriesD(mm)L/DMax. R/MinPower (Kw)T(N/m)T/A³Capacity(kg/h) KC-20A2132-486004304.82-10   KC-30  A3032-485007.5854.810-30 B60011854.810-40 C500151106.215-55 D60018.5140830-75   Main features for laboratory extruder: 1. Very low energy-consumption  2. PLC touch screen operation and visualization 3, Record the data and visualization of data change 4. Can process standard-sized granules 5. Back pull screw with self-cleaning. Characteristic for Gongle Co-rotating Parallel Twin Screw Extruder: 1, Cordwood type screws 2, Sectional type barrels 3, Heating and cooling separately each section 4, Screen change with one-body casting 5, Base support is one plate bending without steel sheet sectional

GS-150 Single screw extruder 1. Company information: Nanjing GS-plus is a professional plastic extruder mamufacturing company; the main products are all kinds of Plastic/Rubber extruders, such as: Twin screw extruder pelletizing line, Single screw extruder pelletizing line Kneader Single screw extruder pelletizing line Conical twin screw force feeder 3D printer filament extruder... 2. Single screw extruder information: Single screw extruder is mainly used for extruding soft, hard polyvinyl chloride polyethylene and other thermoplastics. Single screw extruder cant only produce pellets/granules with cutting systems, but also produce various plastic products, such as: pipes, plates, filaments, sheets, with other corresponding auxiliary machines. Single screw extruder has higher capacity, lower energy and better plastification. Single screw extruder uses involute gear transmission, which has lower noise, stable operation and longer working. 3. Single screw extruder mainly used in: Plastic recycling: PP/PE film, bags, non-woven fabric, woven bags, PA nylon fishing wet, PET flakes, EPS foam, Plastic rubber extrusion: connected with Kneader, Banbury... PVC, WPC... 4. Single screw extruder advantages: Good quality: screw using 38CrMoAl material, nitrigon treatment; water cooling for barrel Water cooling for barrel, Casing aluminum heater, ABB frequency convetor, Omron electrical elements If you need more information of Single screw extruder Plastic recycling single screw extruder, Single screw extruder pelletizing line, Single screw extruder,

Product Name Single Screw Extruder Model DLG90 Capacity 60-85kg/h Installed Power 35KW Power Consumption 24 KW Main motor power 22 KW Voltage 380V/50Hz Speed Style Inverter Size 3450 960 2060mm DLG90 single-screw extruder is mainly used for processing all kinds of twice extruded food and three-dimensional extruded food by using all kinds of starched, wheat flour, and potato powder as materials. It can make smooth and soft products in good figure and top grade taste. Reasonable designed structure, high capacity, low consumption, high automation, easy operation, and convenient maintenance are all its characteristics.

It has been the professional manufacturer and the model company for advanced and high efficient extrusion food machinery in this field. congregates an expert team with twenty-year experiences in this extrusion machine industry, not only working hard to constantly researching extrusion technology, but also exploring food processes in order to benefit our clients producing creative food. Categories as follows: Puffing food machinery Fried snack machinery Fortified rice production line Vegetarian food production line Pet food machinery