Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.
It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials. Advantage: 1. Excellent low temperature resistance. 2. High tensile strength and elongation. 3. Excellent tear, corrosion and weather resistance. 4. Hot melt construction with reliable and durable seams. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10/15m
1.Brand name jianda Surface pe, s, m Size 1mx10m, 1mx8m Fetus: composite tires or polyester With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Type 2: standard: gb/t23441-2009 Low tender degrees: - 20 or 25 Body: polyester tire Thickness of 1.5 mm at least Packed in rolls with pallet/ or as per clients' requirement
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material. Features: Strong impervious performance and good anti-aging ability Acid and alkali resistant, with a service life of 30 years Good endurance climate capability Can be used in low temperature environments with long life High tensile strength, high elongation, good dimensional stability
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. good self heating, easy application, and long service, etc.
Description: SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule. APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc. Specification: Thickness: 3mm 4mm 5mm Width: 1m Length: 7.5m/10m or customized Base: Polyester/Fiberglass Felt Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
SBS modified bitumen waterproof membrane takes SBS (styrene-butadiene- styrene) thermoplastic elastomer modified asphalt mixed with additives as base materials, using premium polyester (PY), fiberglass (G), fiberglass & polyethylene felt (PYG) as matrix , and adopting sand (S), mineral granule (M), polyethylene film (PE), aluminum foil etc as dip-coat, which is produced by stirring and grinding with special equipment. Features A)Good low temperature flexibility,it has no crack when temperature drops into -20â??;Excellent heat resistance, it has no flow when temperature reaches 90â?? B)Great tensity,prolonged life span,easy to use C)Suitable forâ? and â?¡grade constructional waterproofing project,especially for cold area and the project of frequent structural deformation Size Available â?¢Width-3.28ftï¼?1mï¼? â?¢Length-24.6ft(7.5m) 32.8ft(10m)49.2ft(15m) â?¢Thickness- PY (3mm,4mm,5mm) G (3mm,4mm) APP modified bitumen waterproofing membrane based on APP (atactic polypropylene) or APAO, APO (It is reported that tiring polymer) modified asphalt roofing, high-quality polyester felt, fiberglass mat base for the child, with fine sand and mineral tablets (piece) material, PE film for the cladding material, the use of advanced technology refined plastomer modified bitumen membrane. Features A)Good elongation;Good anti-weathering;Excellent flexibility B)Strong adhesion;High strength;Anti-abrasion and anti-impact C)Superior High and low temperature resistance,especially for hot areas D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew ADVANTAGES â?¢Over 1000 cases in waterproofing projects â?¢Accredited contract observing enterprise â?¢15 years of experience in waterproofing industry â?¢Self-contained production line,sound and completed production management systems â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels â?¢3 years of innovation in production craftmanship and 10 proprietary products Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
SBS modified bitumen membrane
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material. Advantage: 1. Convenient construction due to cold application. 2. Excellent adhesion to the base. 3. High tensile strength and elongation. 4. Excellent tear and weather resistance. Application: Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10m
I am Beijing Nimble bitumen membrane equipment CO.LT.We are mainly specialized in research,development and manufacture of equipment for bitumen membrane.Our company was established in 1991.It acts as the leading supplier of equipment for bitumen membrane in China, and a newborn force in international equipment industry for bitumen membrane.Beijing Nimble waterproofing membrane Corporation had focused on offering quality goods and on-time service,We can according to customer requirement to produce different types equipment from the small equipment to ten million ©O . Until now, we had served hundreds of customer from more than 10 countries in the world. Our equipment has exported to India,Russia,UKrine,Saudi Arabia ,North Korea,and We have a branch company In India now. ART 1 General information Technical parameters 1Production capacity: annual production of modified bitumen membranes of 3 million Sqm (16 hours/day, 300days/year with two shifts) Reinforcement: Polyester, Glass fibre Modified materials : SBS, APP 4Materials for surface: sand, scraps of stone, PE membrane, aluminum foil, etc. 5Specification of products: Width: 1m, thickness: 2-5mm, length: 7.5 or 10m 6Production speed: 0-20m/min¡£ 7Main workshop: 60¡Á (12-15) ¡Á£¨6-8£©m Labor required 5-7 workers are needed for the whole production line Boiler room: 2workers Modified workshop: 1-2 workers Production workshop: 2-3 workers Utilities Electricity: Alternating current, 380V50Hz60Hz Water Consumption: 2-3 T/D
Tearing strength: 250/350 n
Ask about your requirements Pallets, rolls of 1m w x 10m l
The product is employs asphalt or thermoplastic elastomer (styrene â?? butadiene block copolymer SBS), modified asphalt impregnated base. Both sides are coated with elastomer or plastic bitumen,upper surface is sprinkled with fine sand , mineral grains (membrane) or coverage polyethylene film,and underside with fine sand or coverage from polyethylene membrane. The product has good waterproof performance and anti-aging performance, and has the characteristics of not flowing at high temperature, not brittle crack at low temperature, simple construction, no pollution, long service life.It is mainly used in the industrial and civil building roofingã??bathroomã??basementã??pond , bridge, parking lot, swimming pool, tunnel, reservoir and other buildings waterproof, moisture-proof, waterproof steam.Impermeability and maintenance of asphalt roofing.sbs Modified asphalt waterproof rolling material is especially suitable for waterproofing of buildings in cold areas and areas with frequent structural deformation.
This kind of waterproof coiled material is made in the following way: base materials are firstly dipped into asphalt or thermoplastic elastomer (e.g. SBS), thermoplastics (e.g. APP or APAO) and modifiedasphalt; then both surfaces are coated with elastomer or plastic asphalt; fine sands and mineral grains (pieces) or polyethylene memb ranes are spread or covered on its upper surface; fine sands or polyethylene membranes are spread or covered on its lower surface. Product Feature * It has good waterproofing and ageing-resistance function; * Not flowing at highest temerature and no crack at lowest temperautre; * Easy application, no pullution; * Long service life; Matters need attention * no construction shall be allowed on rainy, snowy or windy days above grade 5; * construction site and personnel safety protection facilities are complete, fire fighting equipment is effective and placed according to regulations;
Name is sbs modified bitumen waterproof membrane. Thickness is 3mm. Reisitance temperature is -5 degree celsius. Length is 10 meters. Width is 1 meter. z
