Recycling lines to reclaim plastic out of waste like oriented HDPE / PP Tapes, cuttings of woven fabric, industrial plastic wastes and general purpose wastes like LDPE / LLDPE / HIPS / PP / HDPE etc. Technical Specification Model JP 65 RP (P) JP 75 RC JP 100 RC JP 120 RC Screw Dia (mm) 64, 75, 100, 120 L/D Ratio 26:1, 20:1, 20:1, 20:1 Max.Output (Kg/Hr.) 42 to 50, 140 to 150, 300 to 350, 400 to 450 Extruder / Shredder Drive KW 11 | , 37 | 37, 75 | 37, 90 | 45 Dimension L X W X H (Meters) 6 X 2 X 2, 7.3 X 2.5 X 2.2, 7 X 5.5 X 2.5, 7 X 5.5 X 2.5 Additional Grinder Agglomerator, Offline Shredder / Grinder for woven sack, Offline Shredder / Grinder for woven sack, Offline Shredder / Grinder for woven sack All above Models are suitable for in-house plant wastage and the same for non-printed wastage only. Specifications are subject to change without prior notice, due to due to continuous development. These details are indicative and not binding. Extreme values indicated are not achievable simultaneously. The picture may show optional equipment’s that are not part of the standard supply. For detail, refer to the quotation.
The process is used to recycled the waste consumed pet bottles. It contains the debaling, bottle prewashing, label removing, mannual sorting, crushing, gravity separating, flakes washing, drying and packing units. The contaminations content will be less than 200ppm. It can be used to make psf fiber, poy, sheet and non-food grade pet containers. And you can choose automatic sorting machine depends on your requirement.
Pet bottle recycling line The process is used to recycle big capacity and stable quality raw material, especially for psf manufacturer and recycled poy manufacturer with big capacity. The process flowchart as below: De-baling----- label scrapping------ label separation------- bottle pre-washing--------manual sorting and metal detecting-----wet grinding-------gravity separation-------chemical washing for pet flakes-------rinsing--------drying--------packing. Specification: Power : ~380 kw Capacity : 3 mt/hour input Area requirement: 1000m2. Flakes quality criteria: Size: 1 mm ~ 12 mm Humidity: 1.5 % Pe, pp: 20 ppm Paper, wood: 20 ppm Glues/hot melts: 20 ppm Organics: 20 ppm Inorganic particles: 20 ppm Ferrous and non-ferrous metals: 20 ppm Pvc: 30 ppm. Our pre-washing process can make pvc become distinguishable. But the efficiency of labors in bottle sorting unit is important. Colored pet flake: should be less than 20 ppm. But it should depend on efficiency of bottle sorting labors. Seaworthy packing
Pet bottle recycling line Plastic raw materials conveying --- crushing ---- feeding ---hot washing--- discharger ---- friction washing --- single screw floating tank(1)---- single screw floating tank (2) ---- drying ---- silo Wooden
Lianguan pe pp Recycling line 1, the entire production line is used to crush, clean, dehydration, dry PP / PE film, PP woven bags. 2, with a simple structure, easy operation, capacity, low energy consumption, security, reliability, and other advantages 3, the entire production line is fully automatic control, compact structure, high production efficiency, and beautiful cleaning 4, the production line is specifically for the PE / PP film, PP woven bag broken, cleaning, drying production line, it can be easy to clean waste plastic woven bags, dirty agricultural film, waste packaging materials and hard plastic. 5, the production line for cleaning and recycling PE / PP film, PP woven bags. Coordination and follow-up work procedures (granulation system) production line, which will make waste and dirty PE / PP film, PP woven bag is PE / PP film, PP woven bag particle material for the production of new PE, PP film.
waste film recycling line mainly by: conveyor belt, crusher (grinder), friction cleaning machine, sediment rinse tank, chain material digging machine, plastic drying dehydration machine, control cabinet and other components. (Sorting), broken (with water crushing), friction cleaning, rinsing, drying dehydration and other recycling granulation regeneration treatment, the entire production line from the beginning of the waste to the finished product, the operation is very efficient cleaning waste plastic products , Waste dirty agricultural film, waste packaging materials. Easy to operate, high efficiency, environmental protection, energy saving.
Lianguan PET recycling line to introduce international advanced recycling technology, combined with the actual use of the domestic, professional for the recovery of various PET beverage bottles and design. After sorting, to label, wet crushing, heating and stirring, friction cleaning and two rinsing and other processing technology, so that after cleaning PET bottle sheet cleanliness fully in line with the process requirements. Recycled products are widely used in chemical fiber spinning, recycling granulation, injection extrusion and so on. The production line with a high degree of automation, clean cleaning, high recovery characteristics. Can be based on the actual use of the user tailored to the program, to provide matching sorting conveyor belt, beverage bottle label removal equipment, water recycling system. With 20 years experience of manufacturing PET recycling line and the full range of research in waste PET bottles.Lianguan recycling machines can effectively separate the bottles caps,labels and various specifications of bottles by our sorting processing technology,specially design for loose bottles,baled bottles and the bottles with paper labels.We can supply PET Recycling Line.
Pe film recycling line mainly by: sedimentation rinse tank, digging machine, conveyor belt, crusher (grinder or shredder), friction cleaning machine, plastic extrusion dehydration machine, granule machine, semi-plastic machine, control cabinet and other components. The whole production line from the beginning of the waste to the finished product, the operation is very efficient cleaning waste plastic products, waste (waste), waste, dirty agricultural film, waste packaging materials. Easy to operate, high efficiency, environmental protection, energy saving.
Product Application Semi-Automatic PET Bottle Recycling Plant is suitable for recycling waste PET bottle bales to clean PET flakes. It is widely used to recycle big capacity and stable quality raw material, especially for PSF manufacturer and recycled POY manufacturer with big capacity. The Process Flowchart:( Process flowchart based on end product requirement) Label Scrapping------ Label Separation-------- Manual Sorting and Metal Detecting-----Wet Grinding------- Gravity Separation------- Hot-washing -------Rinsing-------- Drying-------- Plastic Removing System------ Packing
Pp, pe film recycling line 1. Features and application: 1) this whole production line is used to crush, wash, dewater and dry pp, pe film. 2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc. 3) this whole production line is automatic controlling, structure arrangement compact, high production efficiency, nice cleanness. 4) production capacity: 200-1000kg/h. 5) after drying the water content can reach 5-8% (according to the thickness of film). Wooden cases or other fix ways.
Pet bottle flake recycling line 1. Features and application: 1) the whole production line can be used to crush, wash, dewater and dry pet bottles. 2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc. 2. Features: 1) cleaned material: impurity content
Small washing line. 500kg/h to 600kg/h This washing line can be used for the ps/abs flake scrap and crushed flake material It is can wash the material with little sand or dust! Work process: First, crusher cut the woven bag into small scrap And then the screw below the crusher to go on the pre-wash process with adding water (screw below the crusher) The high friction washer wash again with using the friction force! After that, the floating tank filter and wash the material Final, the firticon washer do wash process again All the material go to the centrifugal dryer Final, we can go on the pelletizing process! Any problem, welcome to put forward! Customerized
Big capacity radiator recycling line BS-ACP1000 is used to separate copper, aluminum, and iron from the waste radiator. Compared with the ordinary copper and aluminum radiator recycling machine, the biggest advantage of BSGH's new scrap radiator separator recycling line is that it can directly process all kinds of waste radiators without pre-cutting scrap radiators. Advanced technology and complete process flow ensure the separation and recovery of copper and aluminum and realize the regeneration of metal resources. The separation efficiency of copper and aluminum is greater than 99%, and the separation efficiency of iron is greater than 99%, the dust removal efficiency is greater than 99.9%. Technical data of radiator recycling machine is as follows: Model: BS-ACP1000 Application material: All kinds of radiators from the air conditioners, cars, water tanks, and so on Processing capacity: 2-3T/H Separate recycling rate: 99% Dust recycling rate: 99% Machine Power: About 149.55KW Machine Size: 27000 8000 5000MM
This textile waste machine is mainly used to process all kinds of waste cotton, clips, leftover, waste yarn, thread, flock and flax. This machine is SBT630 opening machine combined with model 1390 cotton recycling machine, which makes better fiber. Overall dimensions: 12000mm*2300mm*1600mm Weight: 14 tons Output: 200-300kg/h Motor power: 30kw+22kw for opening machine 15kw+11kw+7.5kw+7.5kw+7.5kw+7.5kw
We firstly design and produce oil filter recycling line is in 2010 years for one customer from south africa who recycling car and truck oil filter,the first oil filter recycling line designed simple( feeding in conveyor+shredder+ feeding out conveyor and magnetic separator) we improved the oil filter recycling line in 201 2 years for one malaysia customer.who process the car oil filters. the output from this line is 500-800kgs per hour . the happy customer share many production experience with us along with many good photos and videos. we improved our line again from this customer.After 7 years,we produced the most successful oil filter recycling line for car and truck oil filter ,the metal and paper separation rate is 99%
We firstly design and produce oil filter recycling line is in 2010 years for one customer from south africa who recycling car and truck oil filter,the first oil filter recycling line designed simple( feeding in conveyor+shredder+ feeding out conveyor and magnetic separator) we improved the oil filter recycling line in 201 2 years for one malaysia customer.who process the car oil filters. the output from this line is 500-800kgs per hour . the happy customer share many production experience with us along with many good photos and videos. we improved our line again from this customer.After 7 years,we produced the most successful oil filter recycling line for car and truck oil filter ,the metal and paper separation rate is 99%
Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It can efficient to increase the bulk density and decrease the transportation cost. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, paper making industry, etc. Our double shaft shredder ( Zibo United Tech Machinery Co., Ltd. ) have a wide application in the scrap paper package recycling: Applications including: Paper tube, fiber drum, cardboard barrel, fiber container, DTY pipe, POY pipe, FDY pipe, nylon tube, spandex tube, spandex-clad tubes, BOPP tube, PET tube, PVC pipe, BOPA pipe, CPP tube, agricultural plastic film package paper tube, plastic wrap paper tube, aluminium tube package tube, industrial paper package pipe, etc. Zibo United Tech Machinery Co., Ltd. Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It can efficient to increase the bulk density and decrease the transportation cost. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, paper making industry, etc. Double Shaft Shredder has two rotors built into the machine that rotate at low speeds, high torque and low noise. With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming.
PET recycle washing line PET flakes making machines Machine material: carbon steel or stainless steel Capacity: 500-3000kg/h Application: waste plastic pet bottle Motor: hua tiao, kong te, simens for option Converter: MBK. AMB, SIMENS for option Install power: 40-200kw This pet plastic recyling line power consumption: 20kwh/h-120kwh/h Water consumption: 1t/h 5t/h
Tissue toilet Paper making machine production line We can design the factory according to the customer's requirement. Customers can use the original paddle board, sugarcane waste or waste paper, or they can decide the final production's quality which they intend to produce. We provide complete production line of toilet paper roll, which can produce the following kinds of paper. 1.Toilet paper 2. Napkin 3. Facial tissue 4. Hand paper The paper production line is made up of seven main parts 1.stock preparation system(pulping section) 2.wire section manufacture of paper mills in chain 3.Vacuum press section kraft paper machinery 4.Ordinary press section 5.drying section Corrugated paper machine 6.paper winding section 7.finished paper section
PET bottle recycling system is used to recycle from PET bottles bales to PET flakes, which with big capacity from 500 kg/h to 9000 kg/h.This process of washing and crushin is consist of different function units. The final product rPET flakes has a stable quality and various grade applications, especially for PSF ,POY manufacturer with big capacity. Recent year, BoReTech develop new technology, rPET can be achieved Bottle-to Bottle grade application with FDA approval.
