Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. ...
Feature products
Rebar coupler is used to connect the two rebar ends in the construction work.
Product description
Rebar coupler is used to connect the two rebar ends in the construction work.
1. Easy operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing.
2. It can connect the rebar with the diameter 16mm to 40mm.
3. Use no.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part
Rebar coupler:
1. Rebar coupler type:paralleled type, left hand type, right hand type, right and left hand type and reducing type.
2.Range of application:suitable for rebar of hrb335 and hrb400.Diameter from14mm to 50mm.
3.Connection method:mechanical splicing.Can connect same diameter and different diameter of rebar.
Product description
Rebar coupler is used to connect the two rebarends in the construction work.
1. Easy operation, saving time and rebarmaterial. The rebar coupler producing and rebar end threading will not beaffected by the weather; it can be processed before processing.
2. It can connect the rebar with the diameter 16mm to 40mm.
3. Use no.45 steel, with the thickness andlength of the rebar coupler, the connecting part has higher tensile strengththan the rebar part
Fit for shipping
4998 Rebar Coupler Suppliers
Short on time? Let Rebar Coupler sellers contact you.
Rebar coupler features:
1. Our coupler adopts 45c of high quality
2. Splice rebars with dia from 14mm to 40mm in construction.
3. Tensile strength can reach 110% of parent rebar. Provides full load transfer with slimmest and shortest coupers, .
4. Quick and easy to install
5. Kinds: coupler with parallel thread. Coupler with upsetting end. Coupler with taper thread.
6. Types: standard type. Left-handed and right handed type. Reducing type.
Application
1. Standard type coupler is designed to splice rebars with same dia.
2. Left-handed&right-handed coupler is designed to splice rebars, which are fixed.
3. Transition coupler is designed to splice rebars with different diameters.
Technical specification:
1.Type:14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 32mm, 36mm, 40mm
2.Thread angle:75º/60º
3.Length:we have standard length for each type, but we can also make different legnths according to customer's specific inquires
4.Thread pitch:2.5mm, 3.0mm, 3.5mm.
Usually packed in woven bag or carton, customer's specifice requirement can also be available.
Rebar coupler is used to connect the two rebar ends in the construction work.
1. Easy Operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing.
2. It can connect the rebar with the diameter 14mm to 40mm.
3. Use No.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part.
Packed with bag or carton, according to customers' requirement.
Our Rebar Couplers are the parallel threaded mechanical splicing system for reinforcing bars diameter 16mm to 40mm and are designed to provide full tensile strength.
Our Rebar Couplers are the parallel threaded mechanical splicing system for reinforcing bars diameter 16mm to 40mm and are designed to provide full tensile strength.
Advantages:
1.Bar-break feature guarantees fully ductile elongation.
2.No reduction of the bar cross-section area.
Working principle:
1.We use GQ50 rebar cutting machine to splice up the end of the rebar.
2.We use Upset Forging Parallel Thread Machine to forge the end of rebar.
3.We use Parallel Thread Cutting Machine to thread the ends of the rebar which have been forged.
4.An upsetting coupler is used to link the two ends of rebar in parallel thread.
Assembly benefit:
1.No torque wrench required.
2.Assembly validated by visual inspection.
3.Manufacturing of couplers under strict quality plans.
4.Standard ISO Parallel Metric Thread design.
RE-BAR Couplers (100% Make in India Product) are a mechanical splicing system for the
connection of Reinforcement Bars from12 mm to 50 mm Diameter.
Classification of our RE-BAR Couplers:
o Provides Continuity of TMT Bars.
o Allows full ductile elongation of TMT Bars.
o NO Reduction of TMT Bar Cross sectional area.
o Full Tension Splicing. Bar Break under tensile load.
o Trustworthy alternative to lap splicing.
o Solves bar congestion problems.
o Reduces steels wastages.
o Shortens Construction cycle time.
o Easy Installation.
o 100% traceability of materials origin & production lots.
o Each joint with JB RE-BAR coupler is stronger by125% & above of TMT Bars.
These are 100% indigenous products manufactured in compliance with BIS-16172:
2014: IS1608, IS 1786; IS 456-2000, ACI-318, BS-8110-1, ASTM A-1034/A1034M, which meets the international Standards.
Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.
We are an Accredited Manufacturers of "HES" Parallel Threaded Rebar couplers in compliance with BS 8110, BS 5900, ACI 318 and BIS 16172:2014 codal specifications. We have a huge clientelle across India and Global for many Renouned Projects.
With proven technology from ICC-ES 4336 Evaluation, our One-Touch rebar coupler is designed for workers to connect rebars in 3 seconds without any additional tool and skilled labor. We can realize saving costs and reducing construction period.
[BENEFITS]
- Satisfy seismic application design conditions
- Reduce rebar loss, times and costs.
(ex. Based on 200,000EA installation and 2020 cost of labor in korea, We can save about minimum $609,270 to maximum $1,451,214)
- Ensuring worker stabiliy
(ex. Reduced rebar lifting equipment operation time, tool drop)
- No additional tool and professional knowledge needed to connect rebar
