1.Adopt thread cold rolling technology, no cutting of rebar parent metal, the strength of threaded end is higher than its parent metal.
2.With spiral lead angle technology, easy to roll thread and ensure higher thread accuracy.
3.Rib peeling device adopts automatic opening-closing mechanism. With high efficiency, need only 20 seconds to finish a threaded end.
4.Be able to process rebar sizes 14-40mm, and max. thread length is 120mm for 16-32mm rebar, and 100mm length for 36-40mm rebar with 7.5kw electric motor.
5.The updated version of AGS-40C and AGS-40Z, the wheelbase and shaft diameter of reducer is bigger than AGS-40 and 40E, so that the machine length is longer than AGS-40C.
6.The height of electric motor and reducer is lower than before, so that it could reduce the center of gravity of the whole machine.
7. Equipped with air compressor.
8. There are 2 machine heads for AGS-50D, 1 is for 14-40mm, and the other for 50mm rebar screw.
Features
1. Hydraulic full-automatic, fast speed.
2. Cutting thread on forged bar with chaser, threading diameter 16-40mm(upsetting M20-M45mm).
3. Strength of the joint is higher than the rebar material.
4. Thread is full enough, max. threading length is 150mm.
6. Thread pitch is from 2.0 to 4.5mm with high accuracy.
Supplier: Ethanol /alcohol process line/machine,ethanol/alcohol turnkey project , industry fruit process machine/production line ,industry vegetable process machine/production line, industry noodle machine/production line , industry bread/cake machine/process line and so on . industry waste water treatment system process line .packing machine Services: Our company's products, technical support, training, installation and commissioning
1. Double cylinder, vertical cylinder is for clamping rebar, horizontal cylinder is for forging. And the two cylinders are almost move together, so forged speed is very high, 25mm rebar forged only 8-10 seconds will be finished.
2. Large cylinder outer diameter, so that large torque, 250mm/300mm (vertical cylinder/horizontal cylinder), easy to forging 40mm steel bar, and even up to 43mm steel bar, one of our clients tested 43mm bar with AGD-40 few month ago.
3. During the upsetting forged process, the male mold will not enter into the female mold, so male mold could be large enough. So that it will not be damaged frequently, (one of our clients upsetting forged 8600pcs 540MPA rebar, but it looks like original), and the forged head is complete and full, there is no deviation, so next step of screw cutting will be very accurate, and could increase your service life of chaser on thread cutting machine.
4. The mold is easy to replace, and only need to replace female mold to matching different size rebar, loosen the each 4 screws on the upper and lower molds, (AGD-40L type, press 'Replace Mold' button, then loosen the 4 screws on the lower mold), and then backward the horizontal cylinder to the end position of the cylinder, the old mold can be taken out at the top of the horizontal cylinder.
5. Automatic Counting Function can be displayed on the screen, to conveniently statistic working efficiency of workers (AGD-40L).
6. If you feel that the forged end is not full/too full, only adjust the horizontal cylinder's distance(initial position), but no need to adjust the pressure.
7. After setting the steel bar size on the machine once, you only need to press the foot switch for each time, no need to set it again, until the whole machine powered off.
Colloidal mill machine is a mechanical equipment that uses a combination of shearing, grinding, and high-frequency vibration to finely grind and homogenize materials. Its core components consist of stainless steel dynamic and static grinding discs, which achieve material refinement through high-speed relative motion.
Use for :
Food industry: homogenization of dairy products, grinding of chocolate, emulsification of jam/peanut butter, processing of bone paste, etc.
Chemical industry: pigment dispersion, lubricant homogenization, emulsified asphalt preparation, etc.
Pharmaceutical industry: ointment mixing, vaccine emulsification, oral liquid homogenization, etc.
Daily chemical industry: cosmetics emulsification, toothpaste grinding, detergent dispersion, etc.
Other fields: dispersion of architectural coatings, pulp processing in the paper industry, crushing of lithium battery base materials, etc.
Capacity are different . Capable of high rotational speed (such as 14000rpm) and ultra refinement (particle size 5-10 m)
Welcome cooperate!
Variable frequency regulation meatball forming machine /meatball process line / machine meatball shape machine,meatball production line
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
capacity 50-420pcs/min ,voltage 380V/50Hz .
