Quad Rams Slickline Bop Wireline Bopp Suppliers and Manufacturers

quad rams slickline BOP/wireline BOP Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -

APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type :Single Ram BOP, Double Ram BOP, Shear Ram BOP Standard: API Spec 16A,16C Working pressure:2000psi-15000psi(14 Mpa-105Mpa) Operating temperature:-18deg--121deg Bore size:7 1/16"-21 1/4" Top & nottom connection:Flanged,studded

Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.

wireline BOP lubricator Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -

1.Introduction: Wellhead Wireline Pressure Control Equipment is used for testing and paraffin treatment in flowing oil well, gas well, water injection well and coalbed methane testing. The unit supplies buffer and transitional area for string running with pressure to hole, could satisfy the wellhead seal requirement and there is no overflow. Simple operating, safe and reliable function. Working pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is 30mm, 52mm, 62mm (65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm, 140mm, 160mm and 180mm. Our factory has the ability to design products to adapt to different environment according to clients ' requirements. The whole Wellhead Wireline Pressure Control Equipment is composed of Grease Injection Control Head, Top Catcher, Lubricator, Bottom Catcher (include testing blowout assly), BOP, Pump-in Tee, Up sheave, Down sheave, Crossover Flange, Quick testing Assly, all kinds of pipes and other components which necessary. 2.Features and Benefits: 1.Grease Injection Control Head is operated by remote hydraulic manual pump, which could seal wellhead in time and promise safety of operation. A lube oil cup mounted on top of Grease Injection Control Head, which is as lubricator for downing cable and assistant for setting tools in well. 2.Top and Bottom Catcher is double safe feature, in order to prevent string tools dropping in well. Top Catcher is by hydraulic remote control, Bottom Catcher has manual operation system if hydraulic system is fault. There is pressure testing blowout sub, which for checking wellhead pressure, releasing left pressure in Lubricator and pressure self-check. 3.Lubricator supplies buffer and transitional area for string tools, which connected by many Union Lubricators. Single Lubricator is 0.8â??3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. 4.BOP could be separated by Single, Dual, Triple and Quad Ram. Hydraulic or Manual control. 5.There is antifreeze& unfreeze and pressure self-check system. 6.Quick testing Assly could improve the safety of BOP, then avoid the second pressure self-check. 7.Up& Down sheave is selected of Aluminium alloy, and has the function of preventing cable jump. 8.Transport and Storage Frame could accommodate full set of Pressure Control Equipments. Has the ability of designing and producing as requirements. 9.According to different service conditions, our factory supply HP/HT Wellhead Wireline Pressure Control Unit with H2S&Acid services.

Hydraulic Ram Wireline BOP Size: 2 1/2"- 6 3/8" Pressure: 3000-15000PSI Ends: Flange,Thread, Union 4130/4135 Forging Double Ram BOP Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.

The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union. 1. Length of the Lubricator Riser could be customized according to working condition. 2. Drilling fluid, frac acidizing fluid, oil, gas and water can be working media. 3. Connection end of the Lubricator Riser could be flange or union. 4. Our Lubricator Riser is designed and manufactured according to API 16A.

Hydraulic Ram Wireline BOP Size: 2 1/2"- 6 3/8" Pressure: 3000-15000PSI Ends: Flange,Thread, Union 4130/4135 Forging Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories. -

Available Our Ram Bop are Cameron U type Ram Bop. Application Surface and subsea Bore Sizes and Working Pressure 7-1/16 3,000 « 15,000 psi 11 3,000 « 20,000 psi 13-5/8 3,000 « 15,000 psi 16-3/4 3,000 « 10,000 psi 18-3/4 10,000 psi 20-3/4 3,000 psi 21-1/4 2,000 «10,000 psi 26-3/4 3,000 psi Body Styles single, Double, Triple ConnectionsFlanged, Studded, Hub Features Major components are forged for uniform strength and impact resistance. Ram packing is generous and self-feeding. It cannot be dislodged by fluid flow. Bonnets are opened and closed by hydraulic pressure. All working parts and control fluid passages are enclosed. Ram change is quick and easy. Well bore pressure aids in holding rams closed. The three seals and vent port hole prevent well pressure from bleeding into operating cylinder. Rams can be locked in closed position by optional hydraulic ram lock. All operating parts as well as rams and seals can be replaced on site.

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -

Dies and inserts and jaws for wellhead tongs/slips The manual tong dies and slip inserts are made of high-quality alloy steel. They are chemically heart-treated for surface hardness. They are wear-resisting and corrosion-resisting and they have a long service life. We can also design and manufacture special inserts according to customer's requirement. Technique Parameter: Use for product Pipe size (in) Rotary Slips 2 3/8" - 5 1/2" 3 1/2" - 7" Rotary Slips 3 1/2" - 7" W3 1/2-75 (125) Rotary Slips 2 3/8", 2 7/8", 3 1/2" 5-75 (125,200) Rotary Slips 4", 4 1/2", 5" DCS-S Drill Collar Slips 3" - 14" Drill Collar Slips 4 1/2" - 11 3/4" (8" & 9") Casing Slips 6 5/8" - 30" WA-C Safety Clamps 3 1/2" - 15 5/8" WA-T Safety Clamps 1 1/8" - 4 1/2" QQP60-89/585 Pneumatic Spider 2 3/8" - 3 1/2" QQP60-89/675 Pneumatic Spider 2 3/8" - 3 1/2" QQP60-127/900 Pneumatic Spider 2 3/8" - 5" Well Repair Manual Tongs 2 3/8" - 10 3/4" B Manual Tongs 2 3/8" - 12 3/4" DB Manual Tongs 3 1/2" - 17" 13 3/8 Casing Manual Tongs 13 3/8" Q13 3/8-30 Casing Manual Tongs 13 3/8" - 30"

Ram-type blow out preventer is important equipment used in oil drilling operations. Variable bore ram-type blowout preventer, as a improved type, is capable of sealing around drill pipes with a range of sizes and have advantanges such as low cost and convenience, expatiate on the sealing well mechanism, this paper discusses the structural characterstics of several typres fo variable bore ram, the operation of the varialble bore ram is simulated with the finite element model. the distribution of the stress is analysed, which provides the toudation for optinizing the design of variable bore ram-type blowout preventer

Main parameters: 1)Standard: API 2)Pressure: 2000~15000psi(14-70Mpa) 3)Size:Nominal bore7 1/16~21 1/4" (179.4~539.75mm) 4) Shear/ Pipe/Blind Ram/ variable 5) According to the latest API Spec 16A standard,and quality standard of ISO9001.

1. Name: variable bore ram 2. Size:2 3/8"--5 7/8" Bop variable bore ram (aslo interchange with rongsheng bop) Size: 2-3/8" to 3-1/2", 2-7/8" to 5", 3-1/2" to 5", 3-1/2" to 7", 3-1/2" to 5-1/2", 3-1/2" to 7-5/8", 2-7/8" to 5-7/8"

1, api 16a ram bop 2, bore dia.: 7 1/16"-26 3/4" 3. Pressure: 14mpa to 105mpa 4. Forged and casting Ram blowout preventer Hydraulically/manual operated locking mechanism. Secondary seal. Flat and side door structure or hydraulic control type flat door structure. The side door and shell are connected by triple hinges. Open and close the valve in sequence by using pressure bar(c type ram bop) The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop) Pistons indicator. Concealed oil way. The cavity of ram is ellipse. Hydraulic pressure: 1200~1500psi(8.4~10.5mpa) Hydraulic connection: npt1 Working temperature: -29 Media: oil gas & drilling fluid containing h2s Ram size and type : series size pipe ram, reducing ram and cutter ram.

The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3 meter, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.

Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used. Other BOP parts that we supply all come from original/OEM manufacturers, they are 100% interchangeable. 1. In accordance with API Spec.16A 2. All the parts are original or interchangeable 3. Reasonable structure, easy operation, long life of plastic core 4. Adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in and shapes, better performance by combining with ran blowout preventer in the use.