Wireline Bop Lubricator

The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3 meter, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.

Hydraulic Ram Wireline BOP Size: 2 1/2"- 6 3/8" Pressure: 3000-15000PSI Ends: Flange,Thread, Union 4130/4135 Forging Double Ram BOP Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.

Hydraulic Ram Wireline BOP Size: 2 1/2"- 6 3/8" Pressure: 3000-15000PSI Ends: Flange,Thread, Union 4130/4135 Forging Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories. -

Drilling Rigs: We supply a full line of drilling rig packages: skid-mounted drilling rigs, truck-mounted drilling rigs and trailer-mounted drilling rigs. Our skid-mounted drilling rigs include diesel electric AC/VFD or DC/SCR drive rigs, mechanical drive rigs, and combination drive rigs, from 1, 000 HP to 6, 000 HP. Our truck-mounted drilling rigs range from 450 HP to 1, 000 HP. Workover Rigs: Our product line includes onshore workover rigs, which range from 150 HP to 1, 000 HP. The service depth of our workover rigs usually equipped with Caterpillar diesel engines and Allison transmissions is from 8, 000 ft to 30, 000 ft. Drilling Equipment: We sell a full line of API certified drilling rig components including masts, substructures, drawworks, crown blocks, traveling blocks, hooks, hook blocks, swivels, rotary tables, and top drives. The rated load of our AC/VFD drive top drives is from 190 tons to 1, 000 tons. We have very strong advantage to supply the projects as follow: i) Rental and sale of drilling/workover rig ii) Rental and sale of BOP iii) Sale of part of drilling rig including mast, substructure, drawworks, rotary table, mud pump and accessories iv) Casing and tubing running service v) Directional Drilling service vi) Rental, sale and maintenance of drilling jar vii) Inspection service viii) Drilling service ix) Wireline logging Specially, we are a project management company hence we can work as a subcontractor to join project or partner with clients in all relevant project if clients need. Export packing.

1. Characteristics of XY-8 hydraulic core drilling rig ·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and  clutch, compact structure, smooth operation, stable performance, good wild card. ·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. ·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). ·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. ·The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. ·Light weight and can be disassembled to many parts, net weight 6500Kg. ·The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. ·With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. ·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents 2. Parameters of XY-8 hydraulic core drilling rig Drilling angel 0-360°  Electric motor   Y280S-4 /75KW   Diesel engine YC6A240-33/ 177KW  Spindle  96mm Forward speed 74/106/150/208/300/431  Reserve speed 110rpm  Forward speed 110/157/222/309/445/640/905/1256  Reserve speed 74rpm Max.torque of spindle 8000nm Spindle stroke 800mm Max.lifting force of spindle 180kn Max.thrust of spindle 110kn Type Planetary gear drive, hand brake Wire rope caliber 21.5mm(6X19)  Drum capacity for rope 120m  Max.lifting force(single rope) 60kn

1. Characteristic of XY-8 hydraulic drilling rig Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. Light weight and can be disassembled to many parts, net weight 6500Kg. The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.

Characteristics of XY-8 hydraulic core drilling rig ·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. ·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. ·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). ·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. ·The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. ·Light weight and can be disassembled to many parts, net weight 6500Kg. ·The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. ·With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. ·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents ·Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. ·The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. ·With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.