Pure Sine Wave Power Inverter With Charger Suppliers and Manufacturers

Pure sine wave power inverter with built-in charger and auto transfer switch (range from 300w to 3000w) Special features: 1. Soft start&external fuses 2. Usb&remote control 3. Three stage battery charge: bulk/absorption/float charge 4. Temperature and load controlled dc fans 5. Protection: led indicator light& audible alarm 6. Ce and rohs approved Inner box and carton

1. Soft start and external fuses 2. 1.5 times rated power for 10s, 2 times continue for 2s 120%

Dc to ac modified sine wave power inverter 3. Usb:5v, 500ma 4. Modified sine wave output 5. High reliability and high efficiency 6. High load ability 7. Temperature and load controlled cooling fan 8. Protection: overload, short circuit, reverse polarity, Over/under input voltage, over temperature 9. Led indicator light indicate inverter, fault mode 10. Ce and rohs approved Inner box and carton

Grid tie power inverter for solar panel (range from 250w to 2000w) 4.Anti-island protection 5.Over current protection 6.Over temperature protection 7.Reverse polarity protection 8.Stackable inverters 9.Ac output voltage switch 10.Led indicators and lcd display Inner box and carton

Ac to dc battery charger (12v/24v/48v, 5a/10a/20a/40a) Special features: 1. Led indicator light show charging status. 2. Temperature controlled cooling fan. 3. 3-stage battery charging: bulk charge, absorption charge, float charge 4. Switch mode technology 5. High efficiency and led visual display 6. Protection: over temperature, short circuit, reverse polarity Inner box and carton

Pure sine wave power inverter, modified sine wave power inverter, pure sine wave power inverter with charger and auto transfer switch, grid tie power inverter for solar panel, AC to s battery charger.

1.Main Features: a. Durable construction for long life under extreme environmental conditions b. Low idle current (less than 1 watt) conserves energy when no loads are present c. power Inverter has soft start capability for starting heavy loads d. Built-in starting control circuits for two- and three-wire generator starting systems e. Simplified controls with a snap-on cover that protects settings from being accidentally changed f. Better thermal performance allows full output power to 50¡ãC (122¡ãF) without de-rating g. High surge capacity starts more difficult loads and handles overload conditions reliably h. Durable powder coated, corrosion resistant steel chassis i. New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF switch and status indicators j. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance. 2. Protection Features: A. Battery over voltage and under voltage protection B. Over temperature protecton C. Automatic overload protection D. Short circuit protection. F.pure sine wave inverter g. pure copper transformer h.1kw to 6kw available i. low frequency inverter j. huge charge current k. support solar system, generator.

Specification Sr-300-s sr-300-s-12vsr-300-s-24v "output Rated power300w Maximum output poweload 120~150%(3min.);2003sec) Ac voltage100~120vac / 200~240vac (optional) Frequency50h0.1% or 60h0.1% (optional) Waveformpure sine wave output (thd

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter�¢??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer�¢??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

12V Dc To 220V Ac 1000W Pure Sine Wave Power Inverter/Converter What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-1000P Output AC Voltage 100-120V/220-240V AC Rated Power 1000W Surge Power 2000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 31.1*16.8*9.6cm(L*W*H) N.W(KG) 2.55kG G.W(KG) 2.9kG Warranty 2years

4000W pure sine wave car power inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-4000P Output AC Voltage 100-120V/220-240V AC Rated Power 4000W Surge Power 8000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 54*25.5*10.3cm(L*W*H) N.W(KG) 8.9kG G.W(KG) 10.0kG Warranty 2years

2000w DC pure Sine wave power inverter. -

1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

Home ups and small office use: IG series: 300W-1200W Pure sine wave online Inverter IP/OP: 110/120VAC 50/60Hz IP/OP: 220/230/240VAC 50/60Hz. Key features User selectable for accepting wider input voltage Full automatic and silent operation Rack Tower design High Frequency Off mode charging Available in five AC outlet configurations: NEMA, Schuko,French, India, and BS1363 Compact size for convenient use and storage. Built-in 8Amp super charger for up to 100Ah battery Small scale and cost effective inverter for home appliancesand office equipment Two-steps intelligent charging control to recharging time Our inverter is smart and stable for home and office use. Cartons,foam and woond

Sunlike Energy Technology Co.,Limited www.sunlikebattery.com amy@sunlikebattery.com Low Frequency 1000W off-Grid Solar Pure Sine Wave DC Inverter Model:LCD LW12/24-2000 Solar Power Inverter Solar Inverter Pure Sine Wave Inverter / Solar Inverter Capacity: 500W-12KW for choose. Peak Power: 3 times as rated Power Input AC Voltage: 110/120/230 and 220/230/240VAC DC voltage: 12V, 24V. Frequence: 50Hz or 60Hz adjustable via LCD Function: Optional remote control, Bypass, and Auto-reconnection. 1. LCD Digital Display Panel, can show voltage, battery and load details and adjust voltage or frequency. 2. built-in AC Charger 35/70Amp, Charger current adjustable 3. Add remote control LCD panel with 5meters length cable. (Optional) Solar Inverter Pure Sine Wave Inverter Powerstar Off-Grid Low Frequency Solar Pure Sine Wave Inverter, LCD indicators display, Pure Sine Wave Inverter 220/230, 50Hz, off grid solar inverter with pure copper transformer, peak power three times, with built-in AC Charger 35/70Amp, Charger current adjustable, UPS Function. Applications: Commonly utilized in home, office, ships, industry, government, vehicles, off-grid solar power systems, and places lacking single phase city power.

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

1000w pure sine wave inverter Battery : 12v /200ah Output : 220v /50hz Input : 130v-270v protection : short circuit, over load,low battery,Full charge.