Products Specifications : 1.Grid-series models: 200W 2.Recommend use solar panels: 320Wp 4.DC Maximum Input Power :300W 5.DC maximum voltage: VpvDC30.2VDC 6.DC voltage range Vpv :10.5V~28VDC 7.Maximum output power factor :99% 8.Maximum input current :15A 9.AC output power :200W 10.AC maximum output power: 200W 11.Anti-voltage protection :Fuse 12.AC standard voltage range :90~140VAC/180~260VAC 13.AC frequency range: 55Hz~63Hz/ 45Hz-53Hz 14.Output current total harmonic distortion :THDIAC
Power :300W DC MAX input current:20A AC MAX output power:300w DC Max Input open circuit voltage:60VDC Recommend use solar panel:400Wp Maximum output power factor:99% DC input voltage range:22~60VDC AC output voltage range:120V version90~140VAC;230V versions DC input Reverse voltage protection:Fuse AC frequency range:55Hz~63Hz/ 45Hz-53Hz Output current total harmonic distortion:THDIAC
Inverter Features: Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method; Fast response speed and stable operation; Better than the conventional methods which may lead to the problems including poor tracking performance, unstable operation or even damaging water hammer effects when the irradiation on the array change rapidly. Digital control with full automatic running, data storage and complete protective functions (overload, over voltage, under voltage, over heat, reverse polarity, thunder, over flow and dry running). The main circuit adopts intelligent power module (IPM), with high reliability and high efficiency 98%. Unique design of aluminum alloy with good cooling and shielding, LCD display (43*29mm) and keys, easy operation, good view through LCD when setting parameter, feel comfortable. Protection degree IP41, working temperature: -10c+50c Inverter connects to city power when there is no sunshine to keep system pumping water is available (optional). Low voltage drive device is our patent right product, can be used in small solar pumping system to save the quantity of solar panels.
Modify power inverter with charger UPS. -
Power :1000W DC Maximum Input Power:1200W DC maximum voltage:VpvDC30.2VDC DC voltage range:Vpv 10.5V~28VDC Recommend use solar panel:1250Wp Maximum output power factor:99% Maximum input current:65A AC output power:1000W AC maximum output power:1000W Anti-voltage protection:Fuse AC standard voltage range:90~140VAC/180~260VAC AC frequency range:55Hz~63Hz/ 45Hz-53Hz Output current total harmonic distortion:THDIAC
System Function 22-45VDC 1. Wide voltage input22-45VDC 2. AC 0 angle with high precision auto-detection 3. Synchronous High-frequency Modulation 4. Pure Sine Wave Output 5. Power Automatically Locked (APL) 6.Constant Current, Constant Power, Current-limit Protection 7. Automatically Shut Down When The Power Output Of a Fault 8. Stack Multiple Machines 9. High-Frequency High Conversion Rate 10. Maximum Power Point Tracking (MPPT) Item No.WGI200 Power200w Recommend use solar panel :200WP DC Max Input power230W DC Input Voltage : 22-45VD MPPT Voltage : 31-40V DC Max Input Current15A AC Max out put Power :215W AC output voltage range :120VAC(90-140VAC) or 230VAC(190-260VAC) AC frequency range : 50Hz/60Hz(Automatic ) Power Factor : >98.5% THD : 5% Protections:Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection Working temperature : -25c-65c Work Environment Humidity : Waterproof desig Grade of Waterproof : IP65 Display : LED Cooling : hermal conductivity silica gel and natural Standby Power: 1-2W EMC: EN61000-6-3:2007 EN61000-6-1:2007 Grid Disturbance:EN 50178+EN 62109-1+VDE0126-1-12 Grid Detection :DIN VDE 1026 UL1741.
Power : 500W Max continuous power :500w Peak Load Power Rate :1000w NO load current draw: less than 0.3A High Voltage Cut Off Level :14.5v-15.5v InputDCvoltageRange:DC 9.7V-15.5V OutputVoltageRange:AC220v/110v+/-5% OutputFrequencyRange:50Hz/60Hz +/- 3Hz MaxOuterTemperature :less than 65c Low Voltage Alarm Level DC 10.4-11.V Low Voltage Cut Off Level DC 9.7V-DC10.3V Overload and Short-circuit Protection :yes Input Voltage :DC 12V Output waveform: Modify sine wave USB DC 5V out put :Optional Cooling :Fan.
2000w DC pure Sine wave power inverter. -
1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan
Solar pumps system Solar pumping system becomes more and more popular, it can be applied to daily use (underground water), agriculture irrigation, forestry irrigation, desert control, pasture animal husbandry, water supply for islands, wastewater treatment engineering, and so on. In recent years, with the promotion of the utilization of newenergy resources, solar pumping systems are more and more used in municipal engineering, city centresquares, parks, tourist sites, resorts and hotels, the landscapes and fountain systems in the residentialareas.This system is composed of a solar array, a pump and a solar pumping inverter. Based on the designphilosoSolar pumping system becomes more and more popular, it can be applied to daily use (underground water), agriculture irrigation, forestry irrigation, desert control, pasture animal husbandry, water supply for islands, wastewater treatment engineering, and so on. In recent years, with the promotion of the utilization of newenergy resources, solar pumping systems are more and more used in municipal engineering, city centresquares, parks, tourist sites, resorts and hotels, the landscapes and fountain systems in the residentialareas.This system is composed of a solar array, a pump and a solar pumping inverter. Based on the designphilosophy that it is better to store water than electricity, there is no energy storing device such as storebattery in the system. Inverter Features: Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method; Fast response speed and stable operation; Better than the conventional methods which may lead to the problems including poor tracking performance, unstable operation or even damaging water hammer effects when the irradiation on the array change rapidly. Digital control with full automatic running, data storage and complete protective functions (overload, over voltage, under voltage, over heat, reverse polarity, thunder, over flow and dry running). The main circuit adopts intelligent power module (IPM), with high reliability and high efficiency 98%. Unique design of aluminum alloy with good cooling and shielding, LCD display (43*29mm) and keys, easy operation, good view through LCD when setting parameter, feel comfortable. Protection degree IP41, working temperature: -10c+50c Inverter connects to city power when there is no sunshine to keep system pumping water is available (optional). Low voltage drive device is our patent right product, can be used in small solar pumping system to save the quantity of solar panels. For more details welcome to contact us.Skype:gznianguansales , salesATgznianguan.com
