KES58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L Note: 1. with heater exchanger 12mm,max.pressurized 8bar; 2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole; 3.the air vent hole can connected with central heat supply pipe to heat the tank wate
Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.
SYSTEM DESCRIPTION VISION VPF series solar water heater usually incorporates a number of high efficiency flat panels, a top situated high pressure hot water tank, supporting bracket and accessories. MAIN FEATURES Reliable collector with average daily efficiency over 54.1% High efficiency flat panels for fast direct water heating System works without high temperature problem High pressure hot water supply from storage tank Compatible with electric or gas heating devices Working all year round even in cold climate Designed for 25 years working life SPECIFICATION Tank capacity: 100; 150; 200; 250; 300 Liter Flat panel size: 2000*1060*82 MM ( L*W*H ) Cover glass: Low-iron tempered glass with transmittance =92% Absorber coating: Selective black chrome or blue TiNOX coating Header and riser: High-quality red TU1 copper tubes 22MM inlet outlet Frame material: Anodized aluminum alloy with anti-aging elastic sealing Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L Tank insulation: High-density PU foam with 80 hour heat preservation Outer tank material: High-quality color steel or stainless steel Bracket material: Galvanized steel; stainless steel; aluminum alloy Accessories: Solar controller; electric heater; magnesium anode Bracket angle: 25°; 38°; 45° Working pressure: 6.0 bar Working life: 25 years
Pressurized solar water heater The characteristic: 1 inner tank : stainless steel sus316l-1.2mm 2vacuum tube : qb-al-n/al-47-1500 3 out tank : painted steel-0.4mm, stainless steel sus304-0.4mm 4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm. 5the material of insulation:polyurethane 55mm 6 the reflector:aluminum component : al 99.85% surface oxidation. Characteristic: 1 this type of solar water heater works with high pressure, so do the water it prodeces. 2 it uses the heat pipe to delivery the heat energy, it can works rapidly. 3 because of no water in the vacuum tube , so there will not tube breakage in the winter. 4 each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage. G.W. 90kg
Diameter of cooper coil: 12mm Thickness of cooper coil: 10mm Length of cooper coil: 45m There is no need to wait and hot water is available immediately Completely automatic operation Exported carton
Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L) Specialty 1. Economical type for most of area, common people can afford it 2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid 3. Mature technology and stable operation 4. Higher efficiency on photo thermal conversion. 5. Accessory is popular and easy maintenance Solar water heater Specifications: 1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm 2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm 3) Inner tank of solare water heater: SUS304 food grade stainless steel. 4) solar water heater Outer tank: Stainless steel, 0.4mm 5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L 6) Thickness of solar water heater bracket: 1.5mm 7) Glass vacuum tube of solar water heater: 58mm X 1800mm Remark: 1. Solar heat storage tank diameter(mm): 460mm/480mm 2. Thickness, insulated(mm): 50mm 3. Vent connection(inch): 1/2''or /3/4'' 4. Electric heater: 47mm 1500W, 3/4'' 5. Water connection(inch): 1/2'' or 3/4'' 6. Collector angle(degree): 25-45
Syc-h Products detail: Syc-h, integrated pressure system Model nmber tube specs tube coating tank capacity (l/gal) Syc-150h diameter:58mm*1800mm*15 heat pipe 150/40 Syc-200h diameter:58mm*1800mm*20 heat pipe 200/50 Syc-300h diameter:58mm*1800mm*30 heat pipe 300/80 Oem and customization are available. 27-42 sets inside a 20'gp
Sfct, split pressurized system for residential A solar water heating system includes three parts, it is collector, water tank and pump station. This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl... Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant. Model number collector model collector absorber area tank capacity(l/gal) Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40 Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40 Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50 Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80 Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80 Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130 17- 33 sets in 20' gp
Sfct, split pressurized system for residential A solar water heating system includes three parts, it is collector, water tank and pump station. This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl... Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant. Model number collector model collector absorber area tank capacity(l/gal) Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40 Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40 Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50 Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80 Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80 Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130 17- 33 sets in 20' gp
Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy
Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems
1. Uni-directional heat transmission 2. Can start from lower temperature 3. Faster transmission 4. Lower heat capacity 5. Low temperature resistance 6. Freeze-proofing 7. High frequency soldering inner tank 8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system 9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency, 10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes, Export cartons
Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons
Material and major element of solar water heater: 1. Inner water tank: sus304-2b stainless steel /0.5mm thick 2. Outer water tank: white plate /0.4mm thick 3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick 4.Solar vacuum tube: A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 /18 / 20 / 24 / 30 pcs 5.Temperature insulation layer; 5.5cm imported polyurethane, keep same temperature and high pressure foam 6.Tank diameter:460 mm
Features: 1) The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. 2) Easy plug-in installation 3) Outer tank material: stainless steel plate or powder coated color steel sheet Key specification: 1) Inner tank: stainless steel SUS304-0.4mm 2) Vacuum tube: Ñ+47 x 1,500mm, Ñ+58 x 1,800mm 3) Tank diameter: 410mm, 460mm, 490mm 3) Outer tank: colored steel-0.4mm 4) Insulation: polyurethane 50mm-60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel-1.5mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20GP/40GP/40HC loading Qty(sets) ¿¬(mm) Length(mm) Qty(pcs) LC47/1500-15 1.87 47 1500 15 80 53 56/118/134 LC47/1500-15 1.87 47 1500 15 110 55 52/114/128 LC47/1500-18 2.25 47 1500 18 100 60 48/104/118 LC47/1500-18 2.25 47 1500 18 150 65 40/88/100 LC47/1500-20 2.50 47 1500 20 110 67 45/96/108 LC47/1500-20 2.50 47 1500 20 165 72 38/80/92 LC47/1500-24 3.00 47 1500 24 130 75 38/84/96 LC47/1500-24 3.00 47 1500 24 200 80 34/70/78 LC47/1500-30 3.75 47 1500 30 160 85 34/70/78 LC47/1500-30 3.75 47 1500 30 245 91 30/64/68 LC47/1500-36 4.50 47 1500 36 195 98 28/61/70 LC47/1500-36 4.50 47 1500 36 300 105 26/54/60 LC58/1800-12 2.24 58 1800 18 100 45 48/100/116 LC58/1800-14 2.60 58 1800 14 120 50 42/88/100 LC58/1800-16 3.00 58 1800 16 140 58 38/78/84 LC58/1800-18 3.40 58 1800 18 160 65 36/76/80 LC58/1800-20 3.70 58 1800 20 180 70 32/68/72 LC58/1800-24 4.50 58 1800 24 220 78 26/56/20 LC58/1800-30 5.60 58 1800 30 280 95 22/46/52
Millionsunâ??s solar flat plate thermosyphon integrating system is composed of solar flat plate collector, pressurized water tank, bracket, circulation pipe and accessories.Due to thermosyphon principle, the collector absorbs solar energy to heat the water inside, while the thermosyphon circulation inside enables the heated water to flow into and be stored in the water tank.
Evacuated type solar collector Pressurized and non-pressurized systems
Separated pressure solar water heater This system is combined with solar collector, pressurized storage tank, work station, pipeline etc. 1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector. 2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank. 3. Solar working station. 4. Working pressure :0.6mpa , testing pressure :1.0mpa Characteristic: 1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly. 2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc. 3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it. 4. Completely automatic
SYSTEM DESCRIPTION Vision VS series split pressurized solar water heater incorporates a heat pipe solar collector, pressurized water tank, pump station and accessories. It is specially designed for villa buildings. The solar collector may be installed either on house roof or wall while water tank may be placed anywhere inside villa. MAIN FEATURES Reliable collector with average daily efficiency over 60.7% High efficiency heat pipe for fast and indirect water heating System works without drainage even if one tube is broken Super anti freezing performance for extreme cold climate High pressure hot water supply from solar storage tank Compatible with electric or gas heating devices Working all year round even in cold climate Designed for 30 years working life SPECIFICATION Tank capacity: 100 ~ 1000 Liter Vacuum tube size: F58*1800MM Solar collector tubes: 10; 12; 15; 18; 20; 24; 30 Pcs Vacuum tube: Three-target coating Cu/SS-ALN(H)/SS-ALN(L)/ALN Heat pipe tube: High-quality TU1 copper 14MM or 24MM condenser Manifold: Copper pipe header, rock wool & PU insulation, aluminum casing Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L Tank insulation: High-density PU foam with 80 hour heat preservation Outer tank material: High-quality color steel or stainless steel SUS304 Bracket material: Shaped strong aluminum alloy or stainless steel Accessories: Solar pump station; electric heater; magnesium anode Solar collector angle: 25°; 38°; 45° Hail Resistance: 25MM Anti-freezing: -40°C Working pressure: 6.0 bar
Skylight compact pressurized solar water heater takes advantage of the vacuum tubes which has the property of high absorptivity and low emissivity, and transfer swiftly the heat absorbed to the water by heat pipe inside the vacuum tubes.This kind of solar water heater can operate efficiently from summer to winter, and afraid not the frost cleft of the vacuum tubes. 1. Uni-directional heat transmission 2. Can start from lower temperature 3. Faster transmission 4. Lower heat capacity 5. Low temperature resistance 6. Freeze-proofing 7. High frequency soldering inner tank 8. Rating pressure is 0.6mpaú¼0.4mpa separately, can connect directly with the city water system 9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency, 10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
