Integrated Pressure Solar Water Heater

Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems

Products intro: Detailed selling lead description A copper coiler with 32 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy. 1) material: A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy or stainless steel C) bracket: galvanized steel or aluminum alloy 2) solar vacuum tube: A) size: 58 x 1, 800mm B) quantity: 20 / 24 / 30pcs C) hail resistance: diameter 25mm 3) temperature insulation layer: A) 50mm imported polyurethane, keep same temperature and high pressure foam B) heat preservation: 72 hours 4) capacity: 200 / 240 / 300 liters 5) tank diameter: 420 / 460mm 6) max. Pressure bearing: 0.6mpa 7) iso9001 / ce certificate/en-12975 8) 3 years' international responsibility for free repairing or exchange due to original Quality problems

Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy

Products intro Sc-c01 Sc-c01(separate pressurized solar collector) The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style. Can endure high pressure when it works. Module design, optional combination, which can meet the demand of large water consumption. Material: aluminum alloy Solar vacuum tube with heat pipe A) size: 58 x 1, 800mm B) qty of tube: 15 / 20 / 25/30pcs C) hail resistance: diameter 25mm Insulation layer in chest A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam B) heat preservation: 72 hours Max. Pressure bearing: 0.6mpa Iso9001 / ce certificate/en-12975 3 years international responsibility for free repairing or exchange due to original quality problems 1, manifold : red copper 2, manifold casing: aluminum alloy 3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m 4, heat preservation: 72hrs 5, hail resistance: 25mm 6, max pressure: 10 bar 7, working pressure: 6 bar 8, coating of vacuum tube: ss-c/cu 9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system. High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.

Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ Products intro Sc-b01 Pipeline is made of all red copper and conducted by heat transfer medium liquid To save place and simple to install Suitable for families who can not put vacuum tubes on their roofs Stable and reliable performance Fashionable and beautiful It is harmoniously blended with architecture Environmental protection and energy saving * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy * solar vacuum tube with heat pipe A) size: 58 x 850mm B) qty: 8 / 10 / 12pcs C) hail resistance: diameter 25mm * temperature insulation layer A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters * max. Pressure bearing: 0.6mpa * iso9001 / ce certificate/en-12975 * 3 years international responsibility for free repairing or exchange due to original quality problems

1.Non-pressure one pipe inlet-outlet: Characteristics: This type uses the all-glass evacuated solar collector tubes as the heater-absorbing element. The high vacuum degree of the clearance between the out and inner tube reduces the heat emission. The layer films(coating) of all-glass evacuated tubes transfer the sun energy into heat energy. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down,The water in the storage tank will be heated this natural circulation. Material: Ocean01 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: SUS304-BA,0.4mm d. Frame: SUS202,1.2mm e. The material of insulation: polyurethane Ocean02 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: coated galvanized steel-1.5mm e. The material of insulation: polyurethane Ocean03 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: Aluminium alloy, 2.5mm e. The material of insulation: polyurethane Split pressurized flat plate solar water heaters Characteristics: a. Collector separates with the storage tank. The tank can be put anywhere of the house b. And the collector can be put on both tilted roof and flat roof c. Module design, arbitrary combination, harmony with the building perfectly. d. Intelligent control and automatic operation e. Anti-freeze: no water inside the tubes when it works f. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. g. Multifunction: bathing, washing, domestic heating h. Working at any time and enjoyable. Material: Ocean04 a. Vacuum tube: GB-CU-SS-N/AL-58-1800 b. Inner tank: SUS304-2B,1.2-2.0mm C. Out tank: Painted steel-0.4mm d. Frame: Aluminum alloy,2.0mm Integrated pressurized flat plate solar water heater Characteristics: a. It is completely made of copper, good performance under pressure; the black-chrome-plated copper-strip and copper-pipe is welded by ultrasonic welding machine b. The black-chrome-plated coating has excellent quality, with high absorption efficiency and low emissivity c. The coating is resistant to high temperatures of 220 centigrade., the performance and quality of collector will not be affected; materials and coatings can bear fierce weather and have long life span; endothermic copper-strip with Nickel-plated has excellent resistance to corrode, which can be used more than 15 years. Material: Ocean05 a. Inner tank: SUS304-2B,1.2mm b. Core: black chrome C. Out tank: Drawbench silver steel, 0.4mm / stainless steel,0.4mm d. Frame: Aluminum,2.5mm Flat plate solar water heaters. Customized.

Commodity Integrative Pressurized Solar Water Heater Vacuum Tube : 47mmX1500mm, 58mmX1800mm Amount of Vacuum Tube: 16 / 18 / 20 / 24 / 30 / 36 Material Inner tank: SUS304 stainless steel Outer tank: Galvanized steel alloy Bracket: Galvanized steel alloy Heat insulation layer: Imported polyurethane Heat pipe: straight copper pipe Thickness Inner tank: 1.2mm Outer tank:0.4mm Bracket::1.5mm Heat insulation layer: 50mm Working Temp 99 Celsius degree Working Press 1.0MPa (10 bars) Coloration as per Accessories Assistant tank and electrical heater Certificate ISO9001:2000, CE Warranty 5 years for full system / 15 years for vacuum tube MOQ negotiation Lead time within 15 days for full container at factory Payment Telegraphic Transfer (T/T), Letter of Credit (L/C)

Supplier: Separate pressurized solar water heater, integrative pressurized solar water heater, regular solar water heater, integrative coiler solar water heater

KES58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L Note: 1. with heater exchanger 12mm,max.pressurized 8bar; 2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole; 3.the air vent hole can connected with central heat supply pipe to heat the tank wate