Separated Pressure Solar Water Heater

Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy

Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems

Products intro: Detailed selling lead description A copper coiler with 32 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy. 1) material: A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy or stainless steel C) bracket: galvanized steel or aluminum alloy 2) solar vacuum tube: A) size: 58 x 1, 800mm B) quantity: 20 / 24 / 30pcs C) hail resistance: diameter 25mm 3) temperature insulation layer: A) 50mm imported polyurethane, keep same temperature and high pressure foam B) heat preservation: 72 hours 4) capacity: 200 / 240 / 300 liters 5) tank diameter: 420 / 460mm 6) max. Pressure bearing: 0.6mpa 7) iso9001 / ce certificate/en-12975 8) 3 years' international responsibility for free repairing or exchange due to original Quality problems

Products intro Sc-c01 Sc-c01(separate pressurized solar collector) The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style. Can endure high pressure when it works. Module design, optional combination, which can meet the demand of large water consumption. Material: aluminum alloy Solar vacuum tube with heat pipe A) size: 58 x 1, 800mm B) qty of tube: 15 / 20 / 25/30pcs C) hail resistance: diameter 25mm Insulation layer in chest A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam B) heat preservation: 72 hours Max. Pressure bearing: 0.6mpa Iso9001 / ce certificate/en-12975 3 years international responsibility for free repairing or exchange due to original quality problems 1, manifold : red copper 2, manifold casing: aluminum alloy 3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m 4, heat preservation: 72hrs 5, hail resistance: 25mm 6, max pressure: 10 bar 7, working pressure: 6 bar 8, coating of vacuum tube: ss-c/cu 9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system. High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.

Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ Products intro Sc-b01 Pipeline is made of all red copper and conducted by heat transfer medium liquid To save place and simple to install Suitable for families who can not put vacuum tubes on their roofs Stable and reliable performance Fashionable and beautiful It is harmoniously blended with architecture Environmental protection and energy saving * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy * solar vacuum tube with heat pipe A) size: 58 x 850mm B) qty: 8 / 10 / 12pcs C) hail resistance: diameter 25mm * temperature insulation layer A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters * max. Pressure bearing: 0.6mpa * iso9001 / ce certificate/en-12975 * 3 years international responsibility for free repairing or exchange due to original quality problems

Supplier: Separate pressurized solar water heater, integrative pressurized solar water heater, regular solar water heater, integrative coiler solar water heater

KES58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L Note: 1. with heater exchanger 12mm,max.pressurized 8bar; 2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole; 3.the air vent hole can connected with central heat supply pipe to heat the tank wate

Specification of seperated pressurized solar water heater: 1) solar collector frame: aluminum alloy 2) inner tank: porcelain enamel 3) outer tank: color-painted steel 4) insulation: polyurethane- 40mm-40%kg/m3 4) cold resistance: -50 centigrade in alpine region 5) hail resistance: 25mm 6) auxiliary electric heater: included 7) size: 58x1800 100l-500l Various

Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.