Portable Sf6 Leak Detector Q198 Suppliers and Manufacturers

Portable SF6 Leak detector - Principle: non-dispersive infrared technology (NDIR) - Range: 0-1000ppm or 0-50 ppm - Sensitivity = 1ppm or 0.1 ppm - Accuracy: full range ±5% - Response time: approx.12 second - Power: lithium battery - Operating temperature: 0-50 C

Sensitivity: better than 1/10th oz per year r12 Response time: 0.1 second Spares supplied: 1 spare sensor , 1 pack filters , 1 check leak shipping Specification: 356 x 75 x 89 mm Battery life: 30 hours normal use

Product Introduction: The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price-performance ratio. The high-tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40%, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment. The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three-color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range. Technical parameters: Power supply 3V DC 2 alkaline batteries Maximum sensitivity R12 R22 R134a approved (14g/year) Limiting sensitivity about 20 hours Probe life About 20 hours Operating temperature Battery life about 30 hours under normal use Working way continuous unlimited Response time instantaneous Reset time 1 SEC Warm-up time about 2 seconds Weight 560g

Product Introduction: The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price-performance ratio. The high-tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40%, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment. The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three-color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range. Technical parameters: Power supply 3V DC 2 alkaline batteries Maximum sensitivity R12 R22 R134a approved (14g/year) Limiting sensitivity about 20 hours Probe life About 20 hours Operating temperature 0â??-52â?? Battery life about 30 hours under normal use Working way continuous unlimited Response time instantaneous Reset time 1 SEC Warm-up time about 2 seconds Weight 560g Size 229 65 65mm3 Probe length 35.5cm

Product Introduction The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price performance ratio. The high tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment. The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range.

Product Introduction: The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price-performance ratio. The high-tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40%, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment. The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three-color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range.

Handheld SF6 Gas Product Introduction We have more than 30 years of production experience recently launched a new generation of automatic intelligent leak detector.It is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users.At the same time we apply our rich technology and experience to this product so that users can enjoy excellent performance and price ratio. The high-tech central microprocessing unit is the core of sf6 gas qualitative leak detector. Its digital signal processing ability can better manage the circuit and process the detection signal. Due to the large number of integrated circuits the number of components in the circuit is reduced by 40% which greatly improves the reliability and efficiency. The microprocessor can monitor the probe and battery voltage at the rate of 4000 times per second. Even the tiniest signal can be captured. It can work stably and reliably in any environment. The sf6 gas qualitative leak detector has added some convenient functions. The seven-level sensitivity increases the sensitivity by 64 times. The three-color leds indicate the degree of leakage in a wide range in a progressive manner and are also used to display sensitivity levels and battery power.Touch keyboard for all operations. Avant-garde long and thin shape design greatly facilitates users to use and maintain. It is very convenient to use the indicator light in the direct range. Product nickname SF6 qualitative leak detector automatic SF6 qualitative leak detector SF6 gas qualitative leak detectorLeak Detector

We have more than 30 years of production experience recently launched a new generation of automatic intelligent leak detector.It is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users.At the same time we apply our rich technology and experience to this product so that users can enjoy excellent performance and price ratio. The high-tech central microprocessing unit is the core of sf6 gas qualitative leak detector. Its digital signal processing ability can better manage the circuit and process the detection signal. Due to the large number of integrated circuits the number of components in the circuit is reduced by 40% which greatly improves the reliability and efficiency. The microprocessor can monitor the probe and battery voltage at the rate of 4000 times per second. Even the tiniest signal can be captured. It can work stably and reliably in any environment. The sf6 gas qualitative leak detector has added some convenient functions. The seven-level sensitivity increases the sensitivity by 64 times. The three-color leds indicate the degree of leakage in a wide range in a progressive manner and are also used to display sensitivity levels and battery power.Touch keyboard for all operations. Avant-garde long and thin shape design greatly facilitates users to use and maintain. It is very convenient to use the indicator light in the direct range.

Portable gas leak detector. Gas leak alarm.

Description: Ultra High Sensitivity SF6 Trace Gas Leak Detector-Q200 Sensor: Electron capture Leak Rate:1 x 10-8 ml/s 0.1ppm [With optional capillary inlet,1 x 10-10mL/s SF6] Response:1 sec (85% of reading) Concentration Sensitivity 0.01 ppm Recovery time 1sec Options Calibrated leaks Battery use time 20 Hours Display Alpha numeric VFD Manufacturing Standards To ISO 9001:2015 Certified,to CE requirements Service life:more than 20years

AR5750B Refrigerant/SF6 Gas Leak Detector Description This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to: A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below: CFCs e.g. R12, R11, R500, R503 etc... HCFCs e.g. R22, R123, R124, R502 etc... HFCs e.g. R134a, R404a, R125 etc... Also can detect compound gas for example AZ-50, HP62, Mp39, etc... B. Detect gas leaks in hospital equipments. C. SF6 gas was detected in high voltage circuit shot cut.. D. Detect halogen gas when gas mixing with, chlorine, fluorine, bromine. E. Detect carbon tetrachloride from the dry cleaning machine. F. Detect the halon gas from the fire extinguisher. AR5750B Refrigerant/SF6 Gas Leak Detector Specifications * Detect item: All halogen gas * Sensitivity: Halogen refrigerant gas 3gr / yr * Response time: Instantaneous * Warm up time: < 6 second * Continuous operation time: 5 hours(slightly vary with operation) * Operation temperature: 0 to 52C( 0 to 110F) * Power supply: 2000mAh, 3.7V lithium rechargeable battery

AR5750B Refrigerant/SF6 Gas Leak Detector Description A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life. Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion, etc. This type of device is widely used in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic. They may also be used in firefighting. This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to: A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below: CFCs e.g. R12, R11, R500, R503 etcâ?¦ HCFCs e.g. R22, R123, R124, R502 etcâ?¦ HFCs e.g. R134a, R404a, R125 etcâ?¦ Also can detect compound gas for example AZ-50, HP62, Mp39, etcâ?¦ B. Detect gas leaks in hospital equipments. C. SF6 gas was detected in high voltage circuit shot cut.. D. Detect halogen gas when gas mixing with, chlorine, fluorine,bromine. E. Detect carbon tetrachloride from the dry cleaning machine. F. Detect the halon gas from the fire extinguisher. AR5750B Refrigerant/SF6 Gas Leak Detector Specifications * Detect itemâ??: All halogen gasâ?? * Sensitivityâ??: Halogen refrigerant gas 3gr / yrâ?? * Response timeâ??: Instantaneousâ?? * Warm up timeâ??: < 6 secondâ?? * Continuous operation timeâ??: 5 hours(slightly vary with operation)â?? * Operation temperatureâ??: 0 to 52 deg C( 0 to 110 deg F) * Power supplyâ??: 2000mAh, 3.7V lithium rechargeable batteryâ??

Basic parameters: Size: 108 mm * 61 mm * 40 mm Weight: 135 g Sensor types: electrochemistry method (gas catalytic combustion type, special separately) Destination gas: oxygen (O2), gas (EX), poisonous and harmful gases (CO, H2S, NH3, CL2, etc.) Response time: 30s(O2)40s(CO)20s(EX) Time display: the machine is year, month, day, and the clock display function Display : dot matrix liquid crystal display in Chinese, high brightness white backlight Alarm: voice alarm more than 90dB (10 cm away from instrument) light alarm Red LED Work mode: continuous work (charged under the condition of gas can work 20 hours or so, other gas 7 days or so, the above is for reference only the standBy time depending on the number of alarm) Temperature range: - 20 ~ 50 Humidity: 15% ~ 95% RH (No condensation) Power supply: the lithium battery power supply (1500 mAh) Charging time: 3 ~ 5 hours Charging voltage: DC5V

Basic parameters: Size: 114 mm*55mm*46mm Weight: 105 g Sensor types: electrochemistry method Destination gas: oxygen (o2), toxic or harmful gases (co, h2s, nh3, cl2, etc.) Response time:40s(co) Display: segment lcd, high brightness yellow backlighting Alarm: voice alarm more than 90 db voice alarm (10 cm away from instrument) Light alarm red led Temperature range: - 20 ~ 50 Humidity: 15% ~ 95% rh (no condensation) Battery type: cr2 cr15h270 lithium battery Power supply: 1 high-energy battery (replaceable)

leak Detector, Leakge Tester is professionally applicable to the leakage tests of packages for food, drugs, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products. The instrument also could be used to the determination of seal performance of specimens after falling and compression tests. Basic Applications: Glass bottles, pipes, cans and boxes Plastic bottles, pipes, cans and boxes Metal bottles, pipes, cans and boxes Paper plastic composite bags and boxes Extended Applications: Pen refills Electronic components Medical instruments.

Capacity: 0.7L; Body: PC Plastic material, customized patterns and colors; Lid: PC Plastic material, flip type, dust and leakproof with silicone gasket; Mouth: Wide, easy to put water or ice cubes in; Carrier: Portable and convenient; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;

Application and Brief Intro LSST-01 Leak and Seal Strength Tester is suitable for the quantitative determination of sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. The Leak and Seal Strength Detector can also be used to determine the sealing performance of pilfer-free bottle caps and soft tubes. The compression strength, connection strength of cap and body, cap losing strength, seal strength and butting strength of tubes are the applications of LSST-01 Seal Strength Testing System. This Seal Strength Testing System conforms to standards of ISO 11607-1, ISO 11607-2, ASTM F1140, ASTM F2054, GB/T 10440, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002 . Principle The three test modes of the positive pressure method, which LSST-01 Leak and Seal Strength Tester satisfies are as follows: A. Burst Test: LSST-01 Leak and Seal Strength Tester internally pressurizes the packages until the package fails. The test pressure is the maximum pressure detected before the package fails. B. Creep Test: Pressurize the package internally to a specific pressure and maintains this pressure for a specific time. The test measure is pass/fail. C. Creep to Failure: The package is creep-tested and held until the package fails. The pressure setting is higher than that of the creep test to ensure the package fails in some time. The measure is the time until failure.

MLD is used to detect leakage in pipe line at petrol stations where tanks are equiped with submersible pumps.

Adopting PLC control, enhance the flexibility of function extensions. Man-machine interface touch screen operation, simple and fast. Double-station testing together, promoting the productivity, cut wastage, cost saving production speed: 2400-3000 bottles/hour Conveyor belt length 1500mm Dimension (Lx W x H): size:1.5x0.7x1.7(m) lifting platform adjustment capacity: 910mm-1200mm.