High reactive polyisobutylene (Daelim HRPB), high & middle molecular weight polyisobutylene (BASF OPPANOL)
Polyisobutylene (PIB) is a Liquid or semi-solid vinyl polymer formed by the cationic polymerization of isobutylene, but the raw materials may also include mixture of isobutane and isobutylene, and fractions of C4 hydrocarbons along with isobutylene. The C4 hydrocarbons are derived from naptha of a crude oil refinery or could also be a derived from plants where natural gas is used as a feedstock. PIB are used in diverse application Lubricants (in production of additives as well as basestock) for two stroke engine oils as fuel additives butyl rubber adhesive sealents, hot melt adhesives of EVA type, industrial greases, cosmetics, PIB masterbatch compound, tyre segment in puncture relief applications.
Application &typical recommended dosage: PIB1300 is specially designed for Ashless Dispersants, Gasoline Detergents,, 2-stroke Engine Oil, Supercompressor Oil, Hydraulic Oil, Gear Oil, Metal Working Liquid, Lubricant Grease, Tail Grease etc, also used for sealant, coating, adhesive. 10%--60% Benefits: Good oxidative stability Good emulsification, compatibility and fluidity High temperature decomposition No sulfur, nitrogen and oxygen Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package: 180kg/drum
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%. The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Polyisobutylene Additive (PIB Compound) is a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules Polyisobutylene Additive (PIB Compound) is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip. Polyisobutylene Additive (PIB Compound) is designed to produce stretch wrap films from LLDPE, LDPE or any other Nonslip Polyolefins for the applications of Pallet wrap and Silage wrap. It can be used on either blown film line or cast film process. Polymers used with Polyisobutylene Additive must not contain any Anti blocking additive or slip agent as this will prevent the migra
Lubricant additives, ethylene propylene copolymer(EPM), polyisobutylene(PIB), gear oil additive package, engine oil additive package, detergent, extreme pressure additive, dispersant, viscosity index improver, oxidation and corrosion inhibitor, antifoam, oiliness additive, pour point depressant, emulsion inhibitor, metal passivator, antioxidant, corrosion inhibitor.
It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%. The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%. Characteristics Strong acid neutralization capacity Good oil solubility Scatter glial and ash Good anti-rust and anti-foam ability Good thermal stability and hydrolytic stability Excellent performance of water resistance and high-temperature detergency. 200 liter metal drum (net weight: 200 kg/drum).
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid. Characteristics: Be available for all kinds of base oils The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc. The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224. 200 liter metal drum (net weight: 200 kg/drum).
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid. The recommended dosage is as below: API grade Single-grade Multi-grade SB/CB 1.8% 2.0% SC/CC 1.8% 2.0% SD/CC 3.5% 3.9% SE/CC 3.5% 3.9% SF/CD 4.0% 4.4%. CHARACTERISTICS Excellent detergency, dispersion and anti-oxidation ability. 200 liter metal drum (net weight: 200 kg/drum)
Physical Properties: room temperature is a yellowish transparent semi-solid material, non-toxic and tasteless. Has good chemical stability and resistance to heat, ozone, acid, UV resistant, weather resistance and other properties. Its volume resistivity is high, the expansion coefficient is small, non-dielectric, electric insulation, thermal decomposition residue-free, and polyethylene, paraffin, etc. have a good compatibility. Soluble in gasoline, benzene and other organic solvents, insoluble in water, alcohol solvents, good shear stability. This product is non-dangerous goods, in the 20kg weight polyisobutylene with the use of anti-sticking paper carton or 50 drum packaging.
TBN boosters, engine oil additive, gasoline oil additives, diesel (heavy duty) oil additives, engine oil and pcmo additives gear oil additive hydraulic oil additive cutting oil additive package (neat and emulsifier), ATF additive lubricant cascade components: magnesium, origin dispersant antioxidant, ZDDP, pour point depressant polymethacrylate vi improver pib, polyisobutylene defoamers lubricant dyes.
Polyisobutylene 9003-27-4 Butyleneresinliquid oppanolb
Polyisobutylene(CAS:9003-27-4)
Polyisobutylene(CAS:9003-27-4)
* The adhesion promoters that are used to produce stretch wrap films from LLPDE or LDPE are the PIB master batches. They also act as a cling agent and they contain high molecular weight Polyisobutylene content in the base polyethylene and these matrices will help you to achieve the high end stickiness feature in dry granules. * The dry free flow granules PIB Master Batches are available in a granule form and they are much easier to handle against imposing the direct dosage of Polyisobutylene liquid. The reason behind this is this feature is that it is very difficult to handle because of its high viscosity property. VRNG Exim Industry proffers the best Polyisobutylene additive which is sourced from the leading manufacturers. You can distribute our additive uniformly over the film and thereby bringing in the strength and tackiness properties to the film that is applied over. You can attain high self-adhesive properties and this will help you to cover packages with perfect grip and strength Be of advantage to industries as: PIB Master Batches are designed to produce stretch wrap films from LLDPE, LDPE or any other Nonslip Polyolefin for imparting into the applications of Pallet wrap and Silage wrap. It can be used on either blown film line or cast film process
T154A Polyisobutylene Succinimide Specification : 200L/drum Packing and handling : Metal drum Transportation : Transport by road, sea or rail Description : T154A is an ashless dispersant prepared from high reactive isobutylene by thermal adduction proce... Description T154A is an ashless dispersant prepared from high reactive isobutylene (=1000) by thermal adduction process. With better detergency capability, it can inhibit the carbon deposit and the formation of varnish. It doesn't contain chlorine. Special features Good detergency & dispersion effects Free of chlorine Applications Used for blending medium and high grade diesel engine oils Used for blending medium and high grade gasoline engine oils Used for blending marine cylinder oils for low-speed crosshead engine Particularly suitable for blending environment-friendly engine oils The dosage: 2.0-4.0% Characteristics Item Specification Test method Density, kg/m3, at 20oC 890.0 ~ 935.0 ASTM D1298 Flash point (COC), oC ¡Y 180 ASTM D92 Kinematic viscosity, mm2/s, at 100oC 130.0 ~ 180.0 ASTM D445 Nitrogen, mass% 1.20 ~ 1.40 ASTM D3228 Base number, mgKOH/g 15.0 ~ 30.0 ASTM D2896 The enterprise standard Q/JTH 007-2009 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
Highly reactive polyisobutylene is widely used in making ashless dispersant (Polyisobutylene Succinimide) for lube and fuel additives. Polyisobutylene Succinimide can be directly made from highly reactive polyisobutylene with heat addition and synthetic reactions. With this method, no chlorine is introduced and the product is in high quality. Being an anchoring agent, it is used in various industries such as adhesive, hot melt sealant, prssure sensitive adhesive, sealant, vibration-reducing damp adhesive and armyworm adhesive etc. Non hazardous. Packed in 200L galvanized iron drums or iso tanks.
GALX-154 has the excellent low-temperature dispersity and high-temperature stability. And it can efficiently increase the solubility of the high-temperature ash, it also has good maintaining ability in basicity. When used with metallic detergents, GALX-154 can solve the problem like low-temperature oil sludge of the engines, and can reduce the coatings on the high-temperature part and the carbon deposits. This product is primarily used for blending middle-grade and top-grade internal combustion engine oils, it is usually used in diesel engine oils. Application Used for blending top-grade internal combustion engine oils Used for blending diesel engine oils Recommended dosage:2.0-4.0%
RD154/RD154B Polyisobutylene Succinimide 1.DESCRIPTION They are ashless dispersant prepared from high reactive isobutylene (Mn=1000) by thermal adduction process. With better detergency capability, it can inhibit the carbon deposit and the formation of varnish. It doesnt contain chlorine. 2.SPECIAL FEATURES Good detergency & dispersion effects, used for blending high grade diesel engine oils, used for blending high grade gasoline engine oils. Used for blending marine cylinder oils for low-speed crosshead engine.Particularly suitable for blending environment-friendly engine oils. 3.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD [RD154] [RD154B] Kinematic Viscosity (100),mm /s 130-250 130-250 GB/T265 TBN, mgKOH/g 15-30 15-30 SH/T0251 Flash Point (COC), 170 170 GB/T3536 Nitrogen,m% 1.1-1.3 1.1-1.3 SH/T0224 Density (20°C),kg/m 3 890-935 890-935 GB/T1884 Water,m% 0.1 0.1 GB/T260 Boron,m% none 0.3 SH/T0227 4.STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. Store in dry, clean and ventilating warehouses. 5.PACKING The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
