PFA beakers have excellent chemical corrosion resistance and heat stability, and are commonly used as reaction vessels to dissolve small amounts of substances in strong acid or alkaline solutions at room temperature or under heating conditions. Molded from chemically resistant perfluoroalkoxy resin and featuring a heavy-wall design, these beakers are ideal for continual lab usage. #beakers #labware #samplepreparation #Geochemistry #traceanalysis #reactionvessel
PFA ion exchange column, also known as PFA chromatography column, PFA filtration column, etc. The principle is to use adsorbents to have different adsorption effects on different compounds and different solubility of different compounds in solvents, and to use suitable solvents to allow the mixture to pass through a column filled with adsorbents, so as to achieve the purpose of separation and purification of complex mixtures. Excellent chemical tolerance, resistant to strong acids and bases; Extremely low dissolution and precipitation, without contaminating the sample. #Filter #Separation #purification #Perfluoroalkoxyresin
Used for the connection of laboratory equipment in the chemical industry, semiconductor, pharmaceutical industry and other industries. Connect pipes of different diameters to achieve medium transportation and flow control.
Beaker Taper Product Code: Capacity : 500ml 1000ml 2000ml
It can be used as a gas absorption bottle to connect to various reaction devices. The bottle contains Teflon filter balls. Multiple units can be connected in series as gas filtering devices to make the gas cleaner. 30-4000ml multiple specifications available from stock. #teflon #labware #PFABottle #gaswashbottle #gasabsorption
It has been used in many semiconductor sites due to its highly purity by stabilizing treatment of end groups. Heat resistance, inertness for almost all chemicals and excellent weatherability. Retains mechanical strength at a wide temperature range from-200C to 260C. It is excellent in electrical insulation and high-frequency characteristics. It effectively works in the field of electronics such as high speed communication cables.
1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
Molded from chemically resistant perfluoroalkoxy resin, this beaker features a thick-wall design suitable for continuous use in the laboratory.Suitable for trace and ultra-trace analysis and isotope analysis laboratories. #beaker #teflonlabware #samplepreparation #ICPMS
The blank value of metal elements in the product is low, the content of lead and uranium is less than 0.01ppb, no dissolution and precipitation, no adding back material has a very low background, it not only has good resistance to temperature and various chemical reagents, but also has the advantages of convenient cleaning. Mainly used for trace analysis, isotope analysis and other high-end experimental product characteristics: 1, difficult jointless integrated mold production technology, to ensure the stability of product quality, long service life; 2. The chemical stability of PFA material can significantly reduce cross contamination, the friction coefficient is the lowest in plastics, and there is good electrical performance, and its electrical insulation is not affected by temperature. 3, high temperature resistance: the use of temperature -200 ~ +260â??, in the large temperature difference, can maintain its mechanical strength: from very low to very high temperature, PFA can maintain its flexibility without reducing toughness, and PTFE is the same, which is the highest continuous use of all fluorocarbon polymer temperature. 4, corrosion resistance: resistance to strong acid, alkali, aqua aqua, hydrofluoric acid and various organic solvents; 5, compared with similar products of polytetrafluoroethylene, its high transparency, the specific experimental process, the experimenter can observe the reaction of the sample in the cup at any time, convenient for the experiment; Moreover, the cup body has a precise calibration line, which is accurate in quantification and has minimal error, which can meet the quantitative requirements of routine experiments. 6, easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances, the surface is smooth, without any scratch, in the process of use, easy to clean, to meet the demanding trace analysis experiment needs.
Molded from chemically resistant perfluoroalkoxy resin and featuring a heavy-wall design, these beakers are ideal for continual lab usage. Commonly used as a reaction vessel for preparing strong acid and alkali solutions, dissolved substances, and smaller amounts of substances at room temperature or under heating conditions. Suitable for trace and ultra trace analysis, isotope analysis laboratories, etc. #Beaker #wetdigestion #samplepreparation #traceanalysis #ICPMS
Product Features: 1. Transparent, with raised scales, chemical resistance and heat stability, resistant to various acids, alkalis, HF and organic solvents; suitable for storing chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in accordance with DIN EN 285. The flange design is convenient for clamping and moving, and has the function of dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquid; it uses high-purity raw materials, is easy to clean, and can be used with our company's electric heating plate and digester 3. High thermal stability, good transparency, and smooth surface; 4. It is often used as a reaction container for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a vessel for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200 +260 ; no record Memory effect; 7. Anti-pollution: low blank value of metal elements; 8. Suitable for trace, ultra-trace analysis, isotope analysis and other laboratories, it is a clean experimental analysis vessel; 9. It meets the requirements of laboratories or testing institutions, medical testing, trace testing, etc. for experimental equipment, and is suitable for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); III. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes and other products.
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260â?? Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
The NJbinglab PFA (Perfluoroalkoxy) beakers offer numerous advantages that make them a popular choice in laboratories worldwide. Here are some key benefits of these beakers in English: 1.Extreme Chemical Resistance: NJbinglab PFA beakers are made from a material that exhibits exceptional chemical resistance, resisting virtually all chemicals. This ensures that the beakers will not be affected by harsh chemicals, preserving their integrity and safety for long-term use. 2.Broad Temperature Range: These beakers can withstand temperatures ranging from -200�°C to +260�°C, making them suitable for a wide variety of experimental conditions. Whether you're working with cryogenic materials or performing high-temperature reactions, NJbinglab PFA beakers are ready to handle the heat. 3.Durable and Lightweight: Despite their robustness, NJbinglab PFA beakers are lightweight and easy to handle. This makes them convenient to use, even for large-volume applications. Easy-to-Read Graduations: The beakers feature raised graduations that are easy to read, even from a distance. This allows for precise measurement of liquid volumes, ensuring the accuracy of your experimental results. 4.Low Leaching Potential: The PFA material used in these beakers has a low leaching potential, meaning it is unlikely to contaminate your samples. This is especially important for sensitive applications where cross-contamination could compromise results. 5.Autoclavable and Sterilizable: NJbinglab PFA beakers can be autoclaved or sterilized using high-temperature methods, ensuring they are ready for sterile applications. This makes them a valuable tool in research labs and clinical settings. In summary, NJbinglab PFA beakers offer an unparalleled combination of chemical resistance, temperature tolerance, durability, and convenience. These features make them a trusted choice for laboratories around the world.
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and is lower than 0.01ppb 7. Marked with scale, smooth surface, no adsorption Product Specifications: 10/30/50/100/250/500ml
Wide Mouth Bottle, PFA 250mL/500ml PFA Wide Mouth Bottles are ideal for use with aggressive chemicals. Strong, rigid Sterilizable bottles offer excellent chemical resistance. Excellent for large-volume liquid and phenol extractions, digestions and precipitations. Resists most acids, bases and organic solvents Products Description Product Name: wide mouth 250 ml 500ml PFA reagent bottle Color: Translucent Size: 250ml/500ml Temperature resistance: -200~+260 Characteristic: 1.chemical inert 2.translucent, easy to observing the solutions 3.wide mouth 4.non- leachable, ensure the ultra clean background 5.non-stick, easy to clean 6.ultra low trace metal elements. 7.factory with competitive price 8. Smooth internal finish MOQ: 1pc
Volumetric Flask, 500mL. These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042.Flasks are manufactured from virgin PFA , which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and polypropylene containers, reducing risk of sample carryover in trace analysis applications. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications. Screw cap design provides reduced contamination risk, compared to traditional stopper design.
Medical disposable equipment, medical devices, surgical equipment, icu, ccu, iccu, sicu, micu equipment and devices along with pathology equipment etc. all medical devices used in any healthcare landscape, 100ml plastic Beaker 500ml plastic Beaker, Measuring cylinder 250 ml plastic, Measuring cylinder 500ml plastic, Measuring cylinder1000ml plastic, Forceps 10X13X20mm without tooth, Pipette- 100-1000, Pipette- 1 - 10 ul -1unit, Pipette - 10 - 100 ul unit, Small tips( 2-200ul), Large tips, Tuberculin syringe, Disposable syringe 2 ml, Disposable syringe 5 ml, Disposable syringe 10 ml, Petri dish plastic Dimension 150mm, Sterile Injection Water, Glass test tube 5 ml, Glass test tube 25 ml, Plastic test tube 5ml, Surgical mask, Surgical Cap, Disposable Gloves Small, Disposable Gloves plastic, Disposable Gloves Large, Improved Neubar chamber, Kimtech Multipurpose Reusable Cleaning Cloth ,low lint & High Absorbent wiper ,50 sheet ,Bule color (23.7 cm x25.4 cm), Lab Coat 70% Isopropanol Alcoh.
1. Product Introduction The polytetrafluoroethylene (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. They are suitable for semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear scales for easy observation, and the pointed mouth is convenient for pouring solutions. 2. Product Features: 1. Transparent, with raised scales, chemical resistance and heat stability, resistant to various acids, alkalis, HF and organic solvents; suitable for storing chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in accordance with DIN EN 285. The flange design is convenient for clamping and moving, and has the function of dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquid; it uses high-purity raw materials, is easy to clean, and can be used with our company's electric heating plate and digester 3. High thermal stability, good transparency, and smooth surface; 4. It is often used as a reaction container for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a vessel for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200+260; no record Memory effect; 7. Anti-pollution: low blank value of metal elements; 8. Suitable for trace, ultra-trace analysis, isotope analysis and other laboratories, it is a clean experimental analysis vessel; 9. It meets the requirements of laboratories or testing institutions, medical testing, trace testing, etc. for experimental equipment, and is suitable for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); III. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes and other products. Nanjing Binzhenghong Instrument Co., Ltd.
Our company is a professional manufacturer of laboratory products, engaged in the production, development, and sales of high-tech trace analytical laboratory containers, to fill the gap in We have been in this line for about 30 years and we have our own design department and production line. We can ensure your quality and production line. OEM is warmly welcomed. We mainly produce laboratory products based on PFA materials, such as Beakers/reagent bottles/mixing bars/forceps/funnels/volume flasks/crucibles/mixing bars/water tanks/reaction bottles/washing bottles/measuring bottles, etc. Our products are sold all over the world (such as CUG, IGCAS, SGS, etc. ) And the quality of our products can be compared with foreign brands. They are well received by the experimenter in semiconductor, electronics, pharmaceutical, and other industries, and are widely used in the chemical industry. We continue to improve the quality of products and adhere to the customer, service, technology as the core. Along the way has been recognized by many customers, sincerely thank you for your support and help, but also look forward to working with you to reach a long-term cooperative relationship. In the future, we will continue to serve our customers and provide better-quality products.
PFA condenser tube is mainly a consumable material that uses the principle of heat exchange to cool and condense condensed gases into liquids. A reflux or distillation tube used in organic chemical experiments. Optional specifications: 250, 300, 350, 500ml #Condensation #Reflow #teflon #Heatexchangeprinciple
