Pfa 1L Beaker With Handle

1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.

It has been used in many semiconductor sites due to its highly purity by stabilizing treatment of end groups. Heat resistance, inertness for almost all chemicals and excellent weatherability. Retains mechanical strength at a wide temperature range from-200C to 260C. It is excellent in electrical insulation and high-frequency characteristics. It effectively works in the field of electronics such as high speed communication cables.

The blank value of metal elements in the product is low, the content of lead and uranium is less than 0.01ppb, no dissolution and precipitation, no adding back material has a very low background, it not only has good resistance to temperature and various chemical reagents, but also has the advantages of convenient cleaning. Mainly used for trace analysis, isotope analysis and other high-end experimental product characteristics: 1, difficult jointless integrated mold production technology, to ensure the stability of product quality, long service life; 2. The chemical stability of PFA material can significantly reduce cross contamination, the friction coefficient is the lowest in plastics, and there is good electrical performance, and its electrical insulation is not affected by temperature. 3, high temperature resistance: the use of temperature -200 ~ +260â??, in the large temperature difference, can maintain its mechanical strength: from very low to very high temperature, PFA can maintain its flexibility without reducing toughness, and PTFE is the same, which is the highest continuous use of all fluorocarbon polymer temperature. 4, corrosion resistance: resistance to strong acid, alkali, aqua aqua, hydrofluoric acid and various organic solvents; 5, compared with similar products of polytetrafluoroethylene, its high transparency, the specific experimental process, the experimenter can observe the reaction of the sample in the cup at any time, convenient for the experiment; Moreover, the cup body has a precise calibration line, which is accurate in quantification and has minimal error, which can meet the quantitative requirements of routine experiments. 6, easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances, the surface is smooth, without any scratch, in the process of use, easy to clean, to meet the demanding trace analysis experiment needs.

Molded from chemically resistant perfluoroalkoxy resin and featuring a heavy-wall design, these beakers are ideal for continual lab usage. Commonly used as a reaction vessel for preparing strong acid and alkali solutions, dissolved substances, and smaller amounts of substances at room temperature or under heating conditions. Suitable for trace and ultra trace analysis, isotope analysis laboratories, etc. #Beaker #wetdigestion #samplepreparation #traceanalysis #ICPMS

PFA beakers have excellent chemical corrosion resistance and heat stability, and are commonly used as reaction vessels to dissolve small amounts of substances in strong acid or alkaline solutions at room temperature or under heating conditions. Molded from chemically resistant perfluoroalkoxy resin and featuring a heavy-wall design, these beakers are ideal for continual lab usage. #beakers #labware #samplepreparation #Geochemistry #traceanalysis #reactionvessel

Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and is lower than 0.01ppb 7. Marked with scale, smooth surface, no adsorption Product Specifications: 10/30/50/100/250/500ml

1. Product Introduction The polytetrafluoroethylene (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. They are suitable for semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear scales for easy observation, and the pointed mouth is convenient for pouring solutions. 2. Product Features: 1. Transparent, with raised scales, chemical resistance and heat stability, resistant to various acids, alkalis, HF and organic solvents; suitable for storing chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in accordance with DIN EN 285. The flange design is convenient for clamping and moving, and has the function of dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquid; it uses high-purity raw materials, is easy to clean, and can be used with our company's electric heating plate and digester 3. High thermal stability, good transparency, and smooth surface; 4. It is often used as a reaction container for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a vessel for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200+260; no record Memory effect; 7. Anti-pollution: low blank value of metal elements; 8. Suitable for trace, ultra-trace analysis, isotope analysis and other laboratories, it is a clean experimental analysis vessel; 9. It meets the requirements of laboratories or testing institutions, medical testing, trace testing, etc. for experimental equipment, and is suitable for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); III. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes and other products. Nanjing Binzhenghong Instrument Co., Ltd.

Our company is a professional manufacturer of laboratory products, engaged in the production, development, and sales of high-tech trace analytical laboratory containers, to fill the gap in We have been in this line for about 30 years and we have our own design department and production line. We can ensure your quality and production line. OEM is warmly welcomed. We mainly produce laboratory products based on PFA materials, such as Beakers/reagent bottles/mixing bars/forceps/funnels/volume flasks/crucibles/mixing bars/water tanks/reaction bottles/washing bottles/measuring bottles, etc. Our products are sold all over the world (such as CUG, IGCAS, SGS, etc. ) And the quality of our products can be compared with foreign brands. They are well received by the experimenter in semiconductor, electronics, pharmaceutical, and other industries, and are widely used in the chemical industry. We continue to improve the quality of products and adhere to the customer, service, technology as the core. Along the way has been recognized by many customers, sincerely thank you for your support and help, but also look forward to working with you to reach a long-term cooperative relationship. In the future, we will continue to serve our customers and provide better-quality products.

Volumetric Flask, 1000mL. These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042.Flasks are manufactured from virgin PFA , which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and polypropylene containers, reducing risk of sample carryover in trace analysis applications. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications. Screw cap design provides reduced contamination risk, compared to traditional stopper design.