Orthopedic Small Fragment Set For Surgery Suppliers and Manufacturers

ConMed is a global medical technology company that provides a variety of surgical and medical devices, including products in the field of orthopedics. The company offers a range of solutions for orthopedic procedures, such as arthroscopy and electrosurgery. Some of the orthopedic products provided by ConMed may include arthroscopic instruments, power systems, and other tools used in orthopedic surgeries.

Hand rest position fixed splint (AJY-S08) It is used for fixation after orthopedic surgery such as hand and wrist fractures, nerve tendon injuries, scar contractures, etc., to prevent or correct the deformities caused by bone and joint, neuromuscular disease. 360*210*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy

Material 100% cotton for crochet item; Frame: pine; Hanging Teethers: beech Size Frame: 63*40*52cm / Custom Logo Engraved on ring, Pravite Label, Printing, Embroidery MOQ 10 pcs for styles in stock, 100pcs/style for custom designs. Package Each set is packed in one small carton, then 10 small cartons are packed into one export carton.It will protect the wooden play gym very well .We stick the information on export carton. Sample Time 5-7 Workdays after payment confirmed

Bamboo Cutlery is eco-friendly and Safe replacement for Plastic Cutlery. Reusable Bamboo Cutlary help Customers saving cost significantly Specification: Origin: Viet Nam Main material: 100% Bamboo Size: - Large: + Spoon, Fork: 160x32x10mm + Knife: 165x32x10mm - Small Spoon: 110x25x10mm, 95x25x10mm Color: Natural Color, Brown, Black MOQ: 10000 sets Feature: Non-toxic, eco-friendly, smooth, safe, durable, biodegardable, compostable Function: Decoration, Kitchenware, Hotel, Restaurant.

This Rattan Flower Shape Mirror is the ideal addition for any Coastal home decor setting, due to its trendy yet authentic Vietnamese rattan design. When carefully placed in small living spaces, such as apartments, Tiny Homes, or other compact residences, they may create the illusion of depth, boosting the size of your rooms and making them feel much larger. This mirror will add a stylish charm to your home, naturally bringing your walls to life. Type: Decorative Wall Mirror, Hanging Wall Mirror, Decorative Mirror Material: Rattan, Glass (Mirror) Style: Rattan Modern Color: Natural Shape: Flower

Consisting of two stacking steaming compartments and a lid, the tiered basket works its magic placed above simmering water in a wok, skillet or saucepan. This beautifully constructed small-scale steamer cooks just the right amount of veggies and fish or chicken for a meal for one and stores compactly. Material: Bamboo Shape: Round Color: Natural bamboo color Design: Bamboo steamer set Size: Diameter 15cm, Height 8cm. Feature: non-toxic, non-irritation, flexible, can be mass-produced, lightweight. Usage: kitchenware, tableware, cooking tools, restaurant, household items etc Logo: Customer printing logo or laser logo, engraving logo is available.

Tumi Ishi blocks are small chunks of wood, cut kind of like a gemstone. Basically the idea is you are supposed to stack them all up. Tumi ishi Wood Balancing Stones for Baby is a new take on the classic wooden building block. Unlike standard square blocks, these blocks have many sides making them more challenging to stack Type: Block Set, Other Classic Toys Material: Wood Size: 3-6cm Color: Natural color Logo: Customized Logo Age Range: 0 to 24 Months, 2 to 4 Years, 5 to 7 years, 8 to 13 Years,... Usage: Relaxing, Educate, Simulate brain development for kids Packing: Bag/carton

Orthopedic Car & Chair Backrest Product Code: BR-01 Description Back Rest Made from high quality moulded PU foam. It is suitable to correct sitting posture and avoids back pain while on seat. It comes with extra elastic to cover the seat. Adjustable belt with D hook. It is ideal for the People having to sit long hours on the chair and suffering from back pain. It removes discomfort and pain after surgery

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Belt press juicing machine for fruit vegetable Use for : 01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice 04.Extraction of medicinal juice 1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee 2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life 3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise 4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content. 5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost 6. Juice yield 85% Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw, filter belt speed 1.5-3.5m Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm Width 1475-3430mm high 1820-2420mm

Code 18210: Increased thickness for maximum protection suitable for orthopedic surgeries Features 1. Triple-layer design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfect Color: Brown Hand former: Anatomic shape, non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Sizeï¼? 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 310 +/- 5mm