A demulsifier is a surfactant that breaks up an emulsion. The demulsifier mainly destroys the emulsion by partially replacing the role of the stable film. Used as a dehydrating agent, it can remove the water in crude oil and heavy oil, so that the water content can meet the requirements; it can reduce the viscosity of crude oil when used in oil wells, so that the oil wells will not be blocked. It is obtained by polymerization of fatty alcohol, propylene oxide and ethylene oxide. Soluble in water, light yellow or milky white viscous liquid. Soap smell. Freezing point 25 ~ 40 ºC. Hydroxyl value 60 mg potassium hydroxide/g. , the aqueous solution is milky white.
Drilling and civil engineering bentonite is made by API and OCMA standardIt can be used as low solid phase mud in under ground civil engineering and drilling field  The specifications Item Mud  yieldM3T Filter  loss ML30min Yield  1b100ft2 Moisture  Wet Sieve Analysis0074mm gel strength HH01 18 12 3xPV 12 4 18 25 40 HH02 1218 1218 3xPV 12 4 15 20 30
We deals in the following Chemicals :- Demulsifier (Oil Soluble) Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We deals in the following Chemicals :- Demulsifier (Water Soluble) Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
The demulsifier is a reagent used to destroy emulsions that are formed from mutually insoluble (slightly soluble) substances, one of which is fragmented in the other in the form of small droplets (globules). Shows ability to inhibit paraffin Provides fast separation and purity of produced water, can be used in oil gathering systems and in oil treatment plants It has anticorrosive properties, highly effective for the destruction of stable oil-water emulsions, dehydration of fuel oil, processing of industrial effluents Effective for dewatering and desalting heavy, highly viscous oils.
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
Demulsifiers, or emulsion breakers, are a class of specialty chemicals used to separate emulsions, for example, water in oil. They are commonly used in the processing of crude oil, which is typically produced along with significant quantities of saline water. Drums
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Oil field chemicals like demulsifiers, corrosion inhibitors, neutralizing amines, antifoulants, antifoamers, water treatment chemicals, waste water treatment chemicals..
Propylene glycol is used as the carrier of medicine and agent of particle medicine, as a solvent of perfume and edible pigments, emollient in food packing, and anti-adhesive, as humidor, emollient and solvent, it also can be used as tobacco flavor, lubricated solvent, and preservative. As the raw material of non-saturated alkyd resin, plasticizer, dehydration, surface active agent, solidification agent, and cohesive agent. It also used in paint industry, pesticide industry and dope industry etc. Function of propylen glycol Propylene glycol is used as the carrier of medicine and agent of particle medicine, as a solvent of perfume and edible pigments, emollient in food packing, and anti-adhesive, as humidor, emollient and solvent, it also can be used as tobacco flavor, lubricated solvent, and preservative. Application of propylen glycol Can be used as resin, plasticizer, surfactant, emulsifier and demulsifier raw materials, as well as antifreeze and heat carrier.
Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188C (370.4F) Melting Point: -59C (-74.2F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent.
Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188°C (370.4°F) Melting Point: -59°C (-74.2°F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco. Packaging Details Mono Propylene Glycol MPG CAS: 57-55-6 Iron drums, 215kg/drum, 17.2 MT/20GP Flexitank: 22-23MT/ flexitank cost little
Features of sisal fiber Sisal is a common species of agave, mainly grows in tropical regions. The sisal fiber, extracted from the leaf sheath, has the characteristics of white, Tough texture (strong tensile force), flexible, resistant to sea water immersion and rub, less glue, not easy to slip and others. Applications of sisal fiber Sisal fiber is widely used in navigation, oilfield, mine, lumbering, architectural industry, civil use and transportation. Such as gypsum board, wall paper, paper pulp, sisal ropes, cat toys, insole, brush, bouquet packing, aircraft and bouquet packing.
Dadmac (Quaternary Ammonium Monomer) DADMAC is a high purity, aggregated, quaternary ammonium salt and high charge density cationic monomer. Its appearance is colorless and transparent liquid without an irritating smell. DADMAC can be dissolved in water very easily. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction. The features of DADMAC are: very stable in normal temperature, unhydrolyzed and noninflammable, low irritation to skins and low toxicity. Use: It can be used as cationic monomer to produce mono-polymer or co-polymers with other monomers. The polymers can be used as formaldehyde-free color-fixing agent in the textile dyeing and finishing auxiliaries, film forming on the fabric and improve the color fastness; In paper-making additives can be used as retention agent, paper coating anti-static agent, AKD sizing promoter; Can be used in decoloring flocculation in the process of water treatment and purification with high efficiency and non-toxic;In daily chemicals, can be used as shampoo combing agent, wetting agent and the anti-static agent; In oilfield chemicals can be used as clay stabilizer, cationic additive in acid and fracturing fluid and so on. Its main role is electric neutralization, adsorption, flocculation, cleaning, decoloring, especially assynthetic resin modifier for conductivity and anti-static property. Applications: Water Treatment Paper Textile & Dyeing Oil drilling Mining CodeItem AMZCD101 AMZCD102 AMZCD103 Appearance Clear transparent liquid Solid Content 601 615 651 pH 5070 ColorAPHA 50 NaCI 20
1. Introduction This product belongs to high-effective non-ion surfactant. It is used for dehydration of crude oil and desalting in refineries. 2. Quality index(JHP8703) Appearance Density(20oC) Chroma PH value brown yellow viscous liquid0.95-1.05 g/cm33007-9 4. Using method Mix it to be 2% water solution. Normally, its dosage is about 30-100ppm. 5. Cautions This product has strong moisture absorption, so its container should be sealed. Avoid insolation and fire and store in dry and ventilated conditions. 6. Storage, transportation and packing a. 200kg clean and dry metal drum. b. Storage period is one year. 200L drum, also can be packed with customers' need.
TTPC is widely used in industrial circulating cooling water systems, oilfield water injection systems, paper pulp and water systems, condensate water systems, industrial cleaning water systems, marine mollusk killing, and other industrial water systems for microbial killing, inhibition of microbial reproduction, and biological fouling treatment.
Product Name Methyltrichlorosilane CAS No. 75-79-6 MF CH3Cl3Si EINECS: 200-902-6 Appearance liquid Packing 180kg drum Shelf life 2 Years Application It is mainly used to produce crosslinking agents such as methyltriethoxysilane and methyltrimethoxysilane, silicone resin, special coatings, building waterproofing agents, and oilfield drilling anti-collapse agents (sodium methyl silicate).
Tall oil fatty acids are used in dimer acids, alkyd resins, oilfield chemicals, metalworking fluids, liquid cleaners, textile chemicals, lubricansts,fuel additives, construction chemicals, rubber and tire, metallic stabilizers, printing ink, ore flotation, and fatty derivatives. Specifications Appearance: Yellow Liquid Acid Number: 193-200 Water: 0.5% Max IR: >0.9800 Packing 2,000 LB tote 400 LB drum, 4 drums per pallet
ATMPNa4 is the salt of ATMP, it can inhibit the scale formation, calcium carbonate in particular, in water system. ATMPNa4 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system. ATMPNa4 has good synergistic effects with other additives, in neutral to acidic condition, no ammonia smell is let off. ATMPNa4 is used together with other organophosphonic acid, polycarboxylic acid or salt to form organic alkaline agents, it is used in circulating cool water system for all water quality.
