Mud Pump Ceramic Liner Suppliers and Manufacturers

Oee ceramic liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. We provide zirconia(zro3) sleeves as well as alumina(al2o3.) sleeves., of which ziconia exhibits better impact strength, higher hardness and be honed to finer surface finishes than alumina.

Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. The outer sleeve of Rundongs bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.

Mono-Metal Liner Lake mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. Bi-Metal Liner The outer sleeve of Rundongs bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Ceramic Liner Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.

1.Liners combine the strength of a forged steel outer shell with the abrasion and corrosion reisistance of a high chromium iron or high purity ceramic inner sleeve. 2.Feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minmum uniform bore hardness of HRC65, ceramic liner hardness up to HRC68 3. The surface of the liners with a mirror-like smooth finish and the inner holes dimension tolerance is strictly controlled to ensure a long using life of more than 800 hours, ceramic surged fivefold, more than 4000 hours, highest purity up to 7000-8000 hours. 4. Our liner made for superior performance under tough corrosive and abrasive conditions. We supply all common models of drilling rig mud pump liner in material zirconia ceramic and high chrome bimetal for Emsco, Gardner Denver, National, Oil well, Continental, Ideco, 3NB series mud pump and so on, ceramic liner inner sleeve material is 99.99% zirconia, high chrome bimetal liner is forgings , with chrome content 28%.

Mono-Metal Liner Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. Bi-Metal Liner The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Ceramic Liner Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.

The advantage of ceramic liners are as follow: 1. the ceramic liners can not only adapted to same tough environment such as deep oil reservior, hard stratum and severe earthless, but also can be used for offshore oil and natural gas exploration. 2. Compared with Bi-Metal liner, the serivice life of the ceramic liner is 5-10times higher, its maximum and minimum service life can reach more thna 4000 and 2000 hours respectively. 3. the Zirconia ceramic liner with have used the phase transformation toughen technology has various advantages such as wear-resistance, erosion-resistance, hight-pressure-resistance, high strength and high hardness. 4. the cost of shipment, maintaince, labor and storage in the drilling works can be reduced. 5. Compare with the Alumina liners, the zirconia liner have better toughness properties and longer service life, it can also reduce piston wear and water comsumption for lubrication. 6. Ceramic liners for drilling mud pump are widelu used in Coal, Non-ferrous metal, drilling field to improve drilling efficiency.

Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.

1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide). 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more. 3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner. 4. Pony rod and piston rod is made of premium quality, heat treated alloy steel. 5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .

Bolu manufactures bi-metal liners and ceramic zirconia liners. Bolu also supplies genuine rubber and urethane liner seals. All our liner products are exchangeable with oem products and meet or exceed api-7k standards. Ceramic zirconia liners High strength alloy steel outer hull Ceramic inner sleeve Better resistance to heat and corrosion. Exchangeable with oem products Meet or exceed api-7k standards For more details, please feel free to tell us. Established in 1998, botou bolu petroleum machinery factory is a professional manufacturer & supplier of mud pumps & parts. Bolu petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, tdb hydraulic profile control water plugging pump & parts , x-trees and many other oilfield drilling tools. Bolu petroleum has been granted the api certification. Products are exported to america , middle east, etc. Bolu petroleum is looking forward to being partners with you around the world.

Bi metal liners of mud pump, ceramic liners of mud pump.

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

Qingdao hongbo manufactures and supplies zircornia ceramic liners, HY-chrome liners, hardened steel liners, chrome-plated liners matched performance and durability in most drilling conditions from mountain, desert, plain to offshore drilling. With advanced technology, metallurgical control and rigid inspection, both triplex and duplex liners are available in a wide range of sizes with unmatched performance and durability in the most severe drilling conditions.