Api Mud Pump Liner

Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate. are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.

The advantage of ceramic liners are as follow: 1. the ceramic liners can not only adapted to same tough environment such as deep oil reservior, hard stratum and severe earthless, but also can be used for offshore oil and natural gas exploration. 2. Compared with Bi-Metal liner, the serivice life of the ceramic liner is 5-10times higher, its maximum and minimum service life can reach more thna 4000 and 2000 hours respectively. 3. the Zirconia ceramic liner with have used the phase transformation toughen technology has various advantages such as wear-resistance, erosion-resistance, hight-pressure-resistance, high strength and high hardness. 4. the cost of shipment, maintaince, labor and storage in the drilling works can be reduced. 5. Compare with the Alumina liners, the zirconia liner have better toughness properties and longer service life, it can also reduce piston wear and water comsumption for lubrication. 6. Ceramic liners for drilling mud pump are widelu used in Coal, Non-ferrous metal, drilling field to improve drilling efficiency.

BOLU manufactures Bi-metal Liners and Ceramic Zirconia Liners. BOLU also supplies genuine rubber and urethane liner seals. All our liner products are exchangeable with OEM products and meet or exceed API-7K standards. Bi-metal Liners High strength alloy steel outer hull High Chrome alloy inner sleeve honed to mirror finishes HP design to prevent inner sleeve slippage Exchangeable with OEM products Meet or exceed API-7K standards

BOLU manufactures fluid end module and accessories. All our module products are exchangeable with OEM products and meet or exceed API-7K standards. Fluid End module and Accessories Made of high grade premium materials Exchangeable with OEM products Meet or exceed API-7K standards

Bolu manufactures oem parts for all major mud pumps. All products are exchangeable with oem products and meet or exceed api-7k standards. Main pump brand & model National: 7p-50, 8p-80, 9p-100, 10p-130, 12p-160, 14p-220 Emsco: f-350/500/650/800/1000 fb-1300/1600 Ideco: t-500/800/1000/1300/1600 Gardner denver: pah, pz-7/8/9/10/11 Oilwell: a-850-pt a-1100-pt a-1400-pt a-1700-pt 3nb-1300c/3nb-1600/sl3nb-1300a/sl3nb-1600a/3nb-500/3nb-1000 Tsm1600/tsm750-440/400

BOLU manufactures Full Open Valves & Seats and 3 / 4 Web Valves & Seats. BOLU also supplies valve inserts and valve springs, etc. All our valve products are exchangeable with OEM products and meet or exceed API-7K standards. Full Open Valves & Seats High strength alloy steel with deep carburized wear surface Optional bonded insert type & replaceable insert type Excellent performance in extreme environment Exchangeable with OEM products Meet or exceed API-7K standards For more details, please feel free to tell us. Established in 1998, Botou Bolu Petroleum Machinery Factory is a professional manufacturer & supplier of mud pumps & parts. Bolu Petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, TDB hydraulic profile control water plugging pump & parts , X-trees and many other oilfield drilling tools. Bolu Petroleum has been granted the API certification. Products are exported to America ,Middle East, etc. Bolu Petroleum is looking forward to being partners with you around the world.

Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.

API 7# Full Open Valve Seat for Mud Pump Product Description 1.Stem-guided Valves& Cross-arms Seats Stem-guided valve and cross-arms seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positibe sealing. 2.Three-wing valves and full open seats. Three-wing guided valves and full open seats features greater fluid flow than four wing valves, the unibody forged valve features greater strength than traditional welded wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation. 3.Double angle O-ring valve The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. Its made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump. Brand Model Emsco F-350 F-500 F-650 F-800 F-1000 FA-1300 FB-1300 FA-1600 FB-1600 Gardener Denver PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 National 7-P-50 8-P-80 9-P-100 10-P-130 12-P-160 IDECO T-800 T-1000 T-1300 T-1600 Oil Well A-350 A-560 A-650 A-850 A-1100 A-1400 A-1700 China 3NB-350 3NB-500 3NB-800 3NB-1000 3NB-1300 3NB-1600 3NB-2200

Oee offers 5 different styles of valves & seats to fit your drilling needs, suiting to almost all popular mud pumps in the world. Stem-guided valve &tri-arm seat Stem-guided valve & cross-arm seat Three-wing guided valve & full open seat Welded-wing four-wing guided valve & full open seat Unibody-forged four-wing guided valve & full open seat