Msata Embedded Ssd Solid State Suppliers and Manufacturers

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Feature: Built-in Bluetooth, Support Fingerprint, Ultraslim, Widescreen Processor Brand: AMD, Intel RAM:16 GB, 32 GB, 4 GB, 64 GB, 8 GB, Above 64GB Screen Size:11.9inch or less, 12-12.9 inch, 13-13.9 inch, 14-14.9 inch, 15-15.9 inch, 16-16.9 inch, 17 inch or above Storage Type: eMMC, HDD (Hard Disk Drive), HDD & SSD, SSD (Solid State Drive), SSHD (Solid State Hybrid Drive)

Feature:Built-in Bluetooth Processor Brand: Intel RAM: 16 GB Screen Size: 11.9inch or less, 12-12.9 inch, 13-13.9 inch, 14-14.9 inch, 15-15.9 inch, 16-16.9 inch Storage Type: HDD & SSD, SSD (Solid State Drive), SSHD (Solid State Hybrid Drive) What are the shipment terms ? A: Express( DHL, FEDEX, TNT, UPS). *Takes 3-5 Days express delivery *Tracking number will be sent to you after shipment. RETURN POLICY : This product is in a guaranteed good condition. If for some reason you are unhappy with your purchase notify us within 60 days after you receive the item. All returned items must be in their original condition and packaging and full refund of total funds includes transfer charges would be made.

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

Pomegranate is distinguished by its spherical shape, tough yellow, red, or pink coloured pores and skin, and unusual interior flesh that contains numerous small, edible seeds. A semi-sweet pulp surrounds each of these small seeds. Pomegranates are listed as high-fiber in some charts of dietary value. That fiber, however, is absolutely contained in the suitable for eating seeds, which additionally provide unsaturated oils. Although the membrane is additionally edible, it has no flavour and is generally not eaten. The pomegranate is a famous unusual fruit which origins from the Middle East and Asia. Also recognised as the Granada, Grenade and Chinese apple, pomegranates are now usually grown in Africa, India, Malaysia, southern Europe and in the United States. Pomegranates thrive properly when grown in areas the place the temperature is moderate and the place there is little humidity. BeFresh offers the following sorts to its customers: Wonderful, Hershkovitz, Ako and Shany.The pomegranate is a famous and unusual fruit whose origins are from the Middle East and Asia. Also known as the Granada, Grenade, and Chinese apple, pomegranates are now usually grown in Africa, India, Malaysia, southern Europe, and the United States. Pomegranates thrive properly when grown in areas where the temperature is moderate and where there is little humidity. Oksea Overseas offers the following varieties to its customers: Wonderful, Hershkovitz, Ako, and Shany. Specifications of Pomegranate Color : Red HSN Code : 8109010 Total Soluable Solids ; 15 to 6 TA(%citric) : 0.35-0.39 Storage Temperature While Exporting ; 5 degree to 6degree Optimum Relative Humidity : 90% to 95%

Product name: Helianthus Annuus White Sunflower seeds Origin: Egypt Packing: 25 kg bags Hs Code: 1206000090 Form: whole seeds Color: White Name: White Sunflower seed What is Sunflower seed? Sunflower is one type of the oilseed plants. It also called Helianthus annuus. Sunflower includes many types of seeds such as linoleic, oleic, and NuSun. Linoleic is the most famous type. These seeds are rich in fats particularly monounsaturated, saturated, and polyunsaturated fats. Let's show you the benefits of linoleic in this article. Sunflower seeds are used usually as commercial goods. The color of their hunks distinguishes their type. The seeds of solid black husk are named black oil sunflower seeds. We can get oil by pressing these seeds. We can use the striped seeds of sunflower for food. What are the uses of Sunflower seed? 1. The seeds of Sunflower have many uses. It can be used as a snack and for garnishes. 2. It is a common component in many recipes. The sprouted plants of these seeds can be added in salads. 3. These seeds can be sold in shells or bags after drying them. 4. After drying these seeds, we can eat them roasted with a flavor of salt, flour, barbecue, pickle or hot sauce. 5. Countries of Mediterranean, Eastern Europe, and Asia use seeds of sunflower commonly in shell as a street food where it can be sold freshly roasted. 6. Baseball players eat seeds of sunflower instead of chewing tobaccoo in United States. 7. Raw and roasted mechanically dehulled kernels can be added in baking bread and other goods. 8. Seeds of sunflower are used for making butter which is very useful for children suffering from nut allergies. 9. We can also use sunflower seeds for feeding pets and wild birds.

Bitumen, often referred to as asphalt, is a viscous, black, and sticky substance. It is a semi-solid form of petroleum and is primarily used as a binder in road construction. When mixed with aggregates, it forms asphalt concrete, the material commonly used for paving roads. Primary Characteristics: Appearance: Thick, black to dark brown substance. Temperature Sensitivity: Becomes liquid when heated and returns to a semi-solid state upon cooling. Water Resistance: Acts as a waterproofing agent, making it ideal for various sealing applications. Adhesion: Excellent adhesive properties, allowing it to bind aggregates together effectively. Grades & Types: Bitumen comes in various grades, primarily determined by its viscosity and penetration value. Common types include: Paving Grade Bitumen: Used in road construction. Oxidized Bitumen: Produced by air blowing and has stiffer properties. Cutback Bitumen: Bitumen diluted with solvents to reduce viscosity for specific applications. Modified Bitumen: Bitumen altered with polymers to enhance its properties. Applications: Road Construction: Mainly used as a binder mixed with aggregates to pave roads. Roofing: Used as a waterproofing agent in roofing felts. Dams & Reservoirs: Acts as a waterproofing membrane. Soundproofing: Used in soundproofing materials due to its insulating properties. Advantages: Durability: Offers a long-lasting paving solution, able to withstand various weather conditions. Cost-effective: Provides a reliable and economical material for large-scale infrastructure projects. Recyclable: Old bituminous roads can be reprocessed to produce new roads.

Urea N46% is a common nitrogen fertilizer that is widely used in agriculture. The specifications of Urea N46% can vary depending on the producer and the country of origin, but some of the general specifications are as follows: Nitrogen content (N): 46% minimum Biuret content: 1% maximum Moisture content: 0.5% maximum Granulometry: 90% of particles shall pass through 2.80mm sieve and be retained on 1.00mm sieve. Color: Pure white Free ammonia: 160 PXT PPM maximum Melting point: 132-135 degrees Celsius Radiation: Non-radioactive Physical state: Solid pH: 7.5-8.0 It's important to note that these specifications are general and may vary slightly depending on the producer or the region of origin. The specifications of Urea N46% are important to ensure that it is of high quality and safe for use in agricultural applications. Urea N46% is primarily used as a nitrogen fertilizer in agriculture. Nitrogen is a key element in plant growth, and urea N46% is a highly concentrated source of nitrogen. When applied to soil, it is converted into ammonium, which can be taken up by plant roots. Urea N46% is used on a wide variety of crops, including corn, wheat, rice, soybeans, and many others. It is commonly used in both conventional and organic farming practices to promote healthy plant growth and increase crop yields. The use of urea N46% can help to increase protein content in crops such as wheat, barley, and oats. In addition to its use as a fertilizer, urea N46% is also used in the production of animal feed, where it is added to increase the protein content of the feed. It is also used in the production of some plastics, resins, and adhesives. Overall, urea N46% is a versatile product that is widely used in agriculture and other industries due to its high nitrogen content and easy availability.

SPECIFICATION: UREA 46% NITROGEN GRANULAR UREA CARBAMIDE, CARBONLYDIAMIDE, AGRICULTURAL GRADE, GRANULAR, STANDARD according to GOST 2081-92, MARK B a. PACKING: in bulk or bags / 50 KG b. SPECIFICATION: SPECIFICATION UREA46% GRANULAR GOST 2081-92 Product UREA N46 agriculture grade Nitrogen 46% minimum Moisture 0.5 max Free ammonia 160 PXT PPM maximum BIURET 1.0% maximum Harmful substances 100 % free from harmful substances Melting point 132 degree Celsius Granulation 1mm to 4mm 90% minimum Color White standard or white pure Odor Odorless Boiling Decomposes before boiling Radiation Non-radioactive Physical state Solid@20�°C, 101 KPA white granules Specific gravity Solid@20�° C-1.35 t/ms Floatability in water Sinks and mixes Molecular weight 60.065 Fertilizer granular 94-96%min Prill 96% max Fisher 0.30%

ProductASME 165 spectacle flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating44 based on 37 reviews priceStart from 20 USD RFP India is a renowned exporter manufacturer and supplier of spectacle flanges in the steel market industry worldwide Spectacle Blind Flanges is a strain preserving plate with one open end and one solid end connected with a web or a tiebar In paradigm procedure the open end shapes closes between the two flanges and permits the regular flowage all the way through the pipe work On the other hand if the solid end is shift towards forth and back into its place Spectacle Flanges capably cleans of the pipe and halts the flowing In the meantime these flanges are at length used in particular states with their main advantage that they can be connected to the pipe by means of no welding RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Spectacle Flanges Standard  ASTM ASME ASA 182 Grade  F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Spectacle Flanges Standard  ASTM ASME ASA 182 Grade  F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Spectacle Flanges Standard  ASTM B247 B361 Grade  2024 6061 6063 6101 7075 Titanium Spectacle Flanges Standard  ASTM B381 Grade  Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Spectacle Flanges Standard  ASTM A 105A694 A350 LF3A350 LF2 Grade  F42465256606570 Low Temperature Carbon Steel Spectacle Flanges Standard  ASTM A 350 LF2 A350 LF3 Alloy Steel Spectacle Flanges Standard  ASTM A182 Grade  F1F5F9F11F22F91 Copper Alloy Spectacle Flanges Standard  ASTM ASME SB 61 62 151 152 Grade  UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Spectacle Flanges Standard  ASTM ASME SB 564 160 472 Nickel 200 UNS N02200    Nickel 201 UNS N02201    Monel 400 UNS N04400 Monel K500 UNS N05500    Inconel K600 UNS N06600    Inconel 601 UNS N06601 Inconel 625 UNS N06625    Inconel 800 UNS N08800    Inconel 800H UNS N08810 Inconel 825 UNS N08825    Hastelloy C276 UNS N10276    Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Spectacle Flanges SS 310 310S Spectacle Flanges Duplex Steel UNS S31803 Spectacle Flanges Stainless Steel 304 304L Spectacle Flanges Duplex Steel Spectacle Flanges Stainless Steel 316 316L Spectacle Flanges Duplex Steel UNS S32205 Spectacle F

RBD Coconut Oil is crude coconut oil that has been Refined, Bleached and Deodorized (RBD) to be suitable for consumption. It takes the form of light yellow liquid that changes into a semi solid state at room temperature. Due to its excellent ability to withstand high temperature and anti-inflammatory effects, our RBD Coconut Oil is often used directly as cooking oil and serves as a main ingredient in industrial food processing, cosmetics, oleochemical and pharmaceutical manufacturing.

We have good quality Used and New Laptops of all brands. Product Name Used laptops Processor CPU Series: Intel Core i7 4-generation family CPU Type: Intel Core i7 4702MQ CPU frequency: 2.2GHz Core frequency: 3200MHz Bus Specifications: DMI 5 GT / s Three cache: 6MB Core Architecture: Haswell Core / thread count: quad-core / eight thread Storage Device Memory Capacity: 4GB (4GB Ã?? 1) Memory Type: DDR3L (low voltage version) 1600MHz Hard disk capacity: 500GB Hard Description: Support the expansion turn mSATA SSD hard drive Drive Type: No built-in optical drive Display Touch screen: does not support touch Screen Size: 14 inches Aspect Ratio: 16:9 Screen Resolution: 1366x768 Screen technology: LED backlit, matte glare mask Graphics Graphics Type: Dual Graphics (fever-level graphics card + integrated graphics) Graphics chip: NVIDIA GeForce GTX 760M + Intel GMA HD 4400 Memory Capacity: 2GB Memory Type: GDDR5 Memory Interface: 128bit Number of stream processors: 768 Multimedia devices Camera: 720p HD webcam Audio System: Built-in audio chip Speaker: Built-in speaker Microphone: Built-in microphone Network Communications Wireless LAN: 802.11b/g/n wireless protocol Wired LAN: 100Mbps Ethernet card I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0 Video Interface: VGA, HDMI Audio interface: headphone / microphone combo interface Other interfaces: RJ45 (network interface), power connector Reader: Multi-in-1 card reader Input Devices Pointing device: Touchpad Keyboard Description: Full-size keyboard Power Description Battery: 6-cell lithium battery, 5900 mA Life time: 5 hours, the specific time depending on use environment Power adapter: 100V-240V 90W AC power adapter adaptive Exterior Laptop Weight: 2Kg Length: 339.2mm Width: 239.5mm Thickness: 26.4mm Shell material: composite material Case Description: Black Notebook accessories Packing list: Host x1 notebook Power adapter x1 Power cord x1 Manual x1 Warranty card x1 Shipping DOCS 1. Commercial Invoice 2. Packing list 3. Certificate of Origin 4. Bill of Loading 5. Form A/Form E 6. Other documents are according to customer's

Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.

HS Code 31021000 PRICE = US$ 400 CIF ORIGIN: South Africa PACKAGE: 50KG MIN ORDER: 200 TONS Specification UREA46% Granular GOST 2081-92 Product UREA N46 agriculture grade Nitrogen 46% minimum Moisture 0.5 max Free ammonia 160 PXT PPM maximum BIURET 1.0% maximum Harmful substances 100 % free from harmful substances Melting point 132 degree Celsius Granulation 1mm to 4mm 90% minimum Color White standard or white pure Odor Odorless Boiling Decomposes before boiling Radiation Non-radioactive Physical state Solid@20 C, 101 KPA white granules Specific gravity Solid@20 C-1.35 t/ms Floatability in water Sinks and mixes Molecular weight 60.065 Fertilizer granular 94-96%min Prill 96% max Fisher 0.30%