Maximum laser power: 50w Laser wavelength: 1064nm Beam quality m2:
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Specifications Laser-pumped mode: lamp-pumped Laser wavelength: 1064nm Laser frequency: 0-50khz Laser power: 50w Q-switch mode: acoustic-optic q-switch Pulse width: 20ns Beam quality: m2 < 10 Maximum carving speed points /s: 7000mm/s Standard engraving range (mm): 100 100 Laser head number: 1 Focal length: 100mm Focus diameter: 0.05mm Minimum marking characters: 0.3mm Cooling method: water-cooled Easy-wearing parts: kr lamp Easy-wearing parts usage time: 800 hours Applicable materials: metal and some non-metallic materials Input power: ac380v 10% 50-60hz Equipment power: 5kw The software: english and chinese marking software Engraving accuracy: 0.005mm Repeat accuracy: 0.005mm
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine HLM-SD-50 Laser tubeSemi-conductor mould Cutting area110mm 110mm /300mm 300mm(optional) Laser power 50w Marking speed0-7000mm/s Operating voltage Ac220 10%, 50hz Location precision 0.003mm Working environmentTemperature: 0-40 centidegree, humidity: 45%-85% Marking depth 0-0.3mm Min. Line width 0.02mm Min. Character 0.2mm Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc. Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary deviceExhaust fan and cooling system Laser wavelength1064nm. Wood case
1.Introduction The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface. 2. Features Friendly and ergonomical man-machine interface Stable, precise and high-speed system File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers Auto cooling Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional) 3. Technical Parameters Wavelength 1064 nm Pump source Kr lamp Laser cavity Ceramic Laser output stability í_ í+ 3% Beam expanded angle í_ 8 mrad Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.1mm Letter size Min 0.5mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 7kW Dimension 1500 mm x 500 mm x 1200 mm Net weight ~180 kg Cooling Mode Water cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
Mechanical characteristics : Applied the krypton lamp to the laser source, adopt imported with original packaging key accessories such as ceramic cavity(English), Q-switch (English),Laser source, laser power (Singapore) and so on ,which ensure the high marking precision and speed. Having stable and the long-term work performance that belongs to the general model. Applicable materials and field: 1. Can be carved on the metal and many kinds of nonmetal materials. 2. Widely applied in electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttons, building materials, PVC pipes medical devices, etc. Wooden box and 250kg
Specifications Maximum laser power: 12w Laser wavelength: 1064nm Beam quality m2: < 2.5 Q-switch frequency: 100khz Minimum q-switch laser pulse width: 25ns The largest q-switch peak laser power: 100kw Standard engraving range: 110x110mm / 200x200mm Minimum line width: 0.01mm Repeat accuracy: 0.001mm Total power: 2kw The demand for electricity: 220v 22v/50hz/10a.
Product Features : This type marker use krypton lamp as the drive source which belong to genereal type with high performance and competitive price. Application &Materials: It widely use for metal and non-metal materails such as electronic spare parts, ic(integrate circuit), electric appliance, moblie&communication, hardware, tool parts, precision apparatus, glasses&watch, jewelry, auto parts, plastic&rubber keyboard, building materials, pvc , medical equipments. Type:50W,75W G.W.:300kg Size:1300mm*1200mm*1300mm
Technical parameters: Maximum laser power: 10w Laser wavelength: 10.64¦ìm Laser repetition frequency: 50 khz Standard engraving range: 110mm110mm Engraving depth: 5mm Engraving line speed: 7000mm / s Minimum line width: 0.1mm Minimum characters: 0.4mm Repeat accuracy: 0.01mm Total power: 0.6kw The demand for electricity: 220v / single phase / 50hz / 3a.
Technical parameters: Maximum laser power: 30w Laser wavelength: 10.64ìm Laser repetition frequency: 50khz Standard engraving range: 110mm110mm Engraving depth: 5mm.
Performance Features 1)Taking YAG lamp-pumped solid laser device as the light source,2D fast-speed scanning lences is swing as the scheduled angles under the controling of the computer . The laser focus on the surface of the work piece by F-úclences to form images and realise marking and graph processing. 2)It has the longest application time and the most extensive usage areas and is the most mature technology at present. 3)By using fast-speed scan lens, it can scan the graph in shortest time & finish fine marking process. 4)It can configure auto clamp and baiting production line as Usersª requirements . 5)User can mark data, series number & bar code automatically. 6)User can share & communicate the data with other equipments online. Application scope and material Automobile parts : pistons, piston rings, gears, shafts, bearings, clutch, lights electronic components : resistance, capacitance, chips, printed circuit boards, such as the keyboard. Mechanical parts : bearings, gears, standard parts, such as motors. Instrument : panel signs, precision equipment. Hardware tools : knives, tools, measuring tool, the cutting tool, etc., Daily necessities : handicrafts, zipper, key holder, such as sanitary ware Technical Data Laser output power:50W Standard marking scrope:110 mm110mm Selective Marking scope: 70mm70mm/175 mm175mm Marking depth: 0.01~0.3m (can be adjusted according to material) Marking speed: 7000mm/s Repeated accuracy: 0.01mm Laser wavelength: 1064gm Minimum line width: 0.015mm Electric power requirement:380V/50HZ Machine power: 5 KW Dimensions ItemDimension (cm) (LWH)Packing Size (cm) (LWH)Net WeightGross Weight Laser Optical System:2412812036113129440 Kgs450 Kgs Controlling Cabinet:5956806088117 Water-cooling Machine:5470906565147 Total:1.72 M2
In order to supply automobile, machinery, electronics, metallurgy, petroleum chemical industry urgently needed in the depth of the laser marking and sculpture technology and system research and development, to provide enterprises meet the needs of the market and industrialization of laser products and technology. Recently, the successful development of the new generation laser engraving equipment - lamp pumped solid laser depth marking engraving system. This technology overcome traditional laser marking machine carving depth dive, carving slow faults, can achieve very beautiful deep engraving. This system incorporates laser marking and sculpture at an organic whole, is both a high-speed laser marking machine, is also a depth laser engraver machines multi-usage, simple operation, convenient and flexible. A, Technical features 1, the key parts is superior device such as a sound-light switch, pump lamp, etc, to ensure the high quality of laser system. 2, can use already long pulse width, high-energy laser engraver, and use short pulse width, peak value power laser to sculpture. 3, adopt special measures, under the same power consumption circumstances, peak power than ordinary lamp pumped solid state lasers to high, up to 10 times more likely to 300kW. 4, beam quality good, energy conversion, high efficiency. 5, the world's deepest power-forward, the fastest marking carving machines, one of engraving of high precision, good effect, the biggest engraving depth could exceed 5mm. 6, carving mode: can undertake 3 dimension two-dimensional or three-dimensional sculpture (namely sculptured figures and planar surface with fixed depth or different depth). B.Areas of application Can be used in automobile, motorcycle parts, hardware tools, stainless steel wares, medical apparatus and instruments, clocks jewelry, industrial bearings, mould etc many need deep engraving industry, may to the copper, aluminum, zinc , stainless steel etc in-depth engraving. C.Technique parameters Maximum laser average power 100W Maximum laser peak power 300KW Laser wavelength 1064nm Engraving range
Technical specifications:. Model HL-YLC500-2010 Cutting zone2000*1000mm Cutting thickness0.2-6mm Laser routeFixed laser route, work piece moving by cross slide working table Transmission methodServo ballscrew Cutting positioningRed light pointer Operating systemWindows 2000/xp Max output power500w Laser wavelength1064nm Pulse frequency1-300hz Min.Linewidth0.15mm Electrical source380v/50hz/100a X/y/z axis geometric positioning accuracy 0.08mm/1000mm X/y/z axis re-orientation accuracy 0.04mm Control systemOffline motion control Cooling system5p water cooling Max cutting speed35mm/s Weight1500kg. Wood case.
Wisely diode laser marking machine is designed for small gifts. 1. Automobile parts: pistons and rings, gears, shafts, bearings, clutch, lights, etc. 2. Electronic components: resistors, capacitors, chips, printed circuit boards, computer keyboard, etc. 3. Mechanical parts: bearings, gears, standard parts, motor, etc. 4. Instrument: panel board, nameplates, precision equipment, etc. 5. Hardware tools: knives, tools, measuring tools, cutting tools, etc. 6. Daily necessities: handicrafts, zipper, key holder, sanitary ware, etc. Machine features: For this desktop diode end-pump laser marking machine, it has: 1. Small size, can be operated on the office desk. 2. Low power consumption, less than 200w/hour. 3. Usb 2.0 interface connection - will work with a laptop. 4. Free of maintenance within 15000 hours, very low operation cost. 5. Easy and convenient operation, an operator can be productive within 2 hours. 6. Pilot light pointer to preview the path of laser beam and indicate the focus point. 7. Compatibility - the control software supports coreldraw, autocad, photoshop, etc. 8. Air-cooled system - no need for a water chiller and the associated noise and maintenance. 9. X, y and z axis adjustable working table--easy to focus and locate the material in the optimum position. 10. With more than 45% high optics-optics conversion efficiency, power consumption is decreased significantly. 11. Through using the diode end-pumped laser device, the laser beam has the best transmiting mode and will deliver perfect marking effects which the yag lamp-pump laser and diode side-pumped laser can not achieve. Package:plywood case Package size: 720mm*260mm*650mm Gross weight: 40-53kg
The configuration: 50w, 70w Diode pumped, Rotating device Performance characteristics: 1. Rotating device formulate 2. Rotating device is suitable for any type of Laser Marking Machine and cylindrical, conical work piece to mark in circumference direction 360-degree. 3. The marking speed and rotational speed is consistent .Rotating and marking synchronously. 4. Marking head light base can fluctuate lift and the distance for 250mm. Application scope: Applied to any metal (including rare metal) íóalloy and oxidesíóepoxy resin íóink and so on. Widely used in electroníóglassesíóautoíócommunications productsíóelectronic componentsíóplastic buttonsíóhardware productsíótools accessoriesíóprecision machineryíóSanitary wareíójewelryíóescutcheoníóauto partsíóelectrical appliancesíóbags decorative claspíóKnives, lock, the cooking utensils, integrated circuit IC, medical equipment, etc. Technical parameters: Marking scale Marking speed Marking depth Maximum output power Laser wavelength Cooling way The machine power Marking precision 100*110mm
1. with 3 probes:1064/532/1320nm 2. 1-1000mj 1-6hz adjustable 3. with simmer and aiming beam
Kunshan daxinhua laser technology co., ltd is a manufacturer main to produce laser products, like laser marking machine, laser welding machine, laser engraving machine. Yag laser welding machine widely used in welding mobile phone battery shell, electronic components, mobile communications, precision instruments, metal products, auto parts, glasses watches and clocks, jewelry, medical equipment, metal parts, mold repair and other industries.
Feature: 1Modular design (Laser device module, light scanning module, computer controller module, control box module, laser power module, Q switch power module, cooling system module) each module own independent running space, easy to direct-connect and reduce interruption caused by electromagnetic and hot temperature, ensue the system running long time stably. 2Super prcised light cavity design Professional laser resonance cavity designing ensure high laser output frequency and best laser model, and reduce the dependence to the temperature. 3Flexible control method All control module own two control mode ( hand adjustment and program-control adjustment), which can satisfy different customer needs. Refer to marking electric current, frequency and related parameter, you could adopt the method of hand adjustment. 4light route preview function, focus indication function Add visible red light in the laser light bearing to indicate the position of laser beam, could reach the function of preview to the marking area. Add indicated focus red light, more easy to reach focus function. 5Multi-function marking software Strong picture-drawing and editing function. Auto-linking to selected object, and easy to operation and view. Support Truetype font, single line font, single dimension bar code and two dimension bar code. Support 256 pens, and could set different processing parameter for different object. Basic Technical Parameter: Model WYDP50 /WYDP75 Laser Medium Nd:YAG Laser power 50W/75W Laser wavelength 1064nm Repeated frequency 50KHZ Marking area 110mm Marking depth1.0mm Marking speed\7000mm/s Min marking width 0.04mm/0.05mm Min Character 0.2mm/0.3mm Repeated Precision 0.005mm Complete machine Max. Power 1.5KW/2.0KW Power supply 220V/single phase/50HZ/15A Working environment Temperature 5-28 degree, Humidity
Flight Laser Marking Machine Type: FST-20/30/50 Power: 10W/20W/30W/50W Laser wavelength: 1064nm Marking depth: 1.2mm Marking speed: 800 standard characters/second
UV Laser Marking Machine Type: FST-3w/5w/8w Power: 3w/5w/8w Laser wavelength: 355 Marking area: 150mm*150mm Power input: 220V / 50HZ / single phase or 110V / 60HZ / single phase Power requirement:
