Marine Floating Dredging Rubber Hose Suppliers and Manufacturers

Construction: Tube:SBR, NR, BR. Reinforcement:�Tire cord with helix wire and floating material layer. Cover: SBR and CR blend. Description: Inner cover is excellent abrasion-resistance. It can protect the hose from the friction of depositional silt. And the colored indication layers can reflect the degree of the abrasion effectively. This can guarantees the normal use of the floating hose. Application: Floating high pressure rubber hose �is used with dredgers for silt/gravels conveyance. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on. Characters: 1. Outer cover with excellent abrasion resistance and UV protection. 2. Inner cover with excellent abrasion resistance and high quality. 3. Wearing colored indicator layer. 4. Single foam flotation casing to prevent water absorption. 5. Can bear the high pressure of work. 6. The size of flange is at customers' request. 10. We can produce the hose up to ID1300mm, or as customers' requirement. Specification: Inside�Diameter Working�Pressure Burst�Pressure Vacuum�Pressure Adhesive Strength Abrasion�Value Length mm inch Mpa bar Mpa bar Kpa bar KN/m Cm3 ft m 254 10 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 304 12 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 350 14 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 400 16 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 450 18 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 500 20 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 550 22 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 600 24 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 800 32 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 850 34 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 900 36 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1000 40 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1200 48 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1300 52 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8

Marine floating hose, dredging hose, grade rubber hose, air, water hose, steam/hot water hose, food grade hose.

1, Product Information: Floating discharging hose is becoming more and more popular with the recognition of the clients. It??s used for conveyance during dredging work with some improved functions. The suitable working temperature is from -20°C to 50 °C. Bending angle is from 0° to 45 ° 2, Product Features: Improved bending characteristics Depending on application a lifetime improvement of x 25 compared to the classic rubber lined floating hose Embedded white iron cast rings Liner in the fittings Applicable for offshore (rock) cutter jobs Virtually no maintenance These features make the following applications possible: mainline discharge applications with abrasive solids Rock cutter discharge line Bow connection discharge line 3, Product Material: Tube: Smooth NR/ synthetic rubber, generally color is black Reinforcement: one or multi-layer spiral fabric reinforcements, steel wire spiral layer Cover: Oil, abrasion and weather-resistant wrapped synthetic rubber

Spices, car spare parts, textile, fittings, fruit & vegetables, machinery, medical equipments, electrical fitting, electrical modules, seimens, scneihder electric, abb, ge pipe fittings, pipes, steel, metal bars, plastics, copper, aluminium, footwear, glass, glassware, carpets, flooring materials, felt sheets woven, (pool cloths)watch equipments, construction equipment, rubber bee belt, bearings skf.Clearing agent , transportation , shipping , courier , packaging

Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.

The Quick Details of Rubber Hose For Dredging Project: Place of Origin Luoyang ,China Material: Rubber Hose Brand name: GUORUNXINCAI Inch: 2"-22" Diameter: Φ57-580 Connection: Flange The species of Rubber Hose For Dredging Project: Special Rubber Hose Feeding Rubber Hose Prefabricated Rubber Bending Hose (Large Diameter)Sand Discharge/Sution Rubber Hose Light/Heavy Sand Suction Rubber Hose The Structures of the Rubber Hose: Internal Rubber and Enhanced Layer The product diameter,length and other types of indexes can be based on the customer's requirement. The Applications of Rubber Hose For Dredging Project: Tunnel Projects Dock Projects Dredging Sand Pumping Sand Desalting Hydropower Mining Tailing Concentrate Mining Metallurgy,etc. The Features of Rubber Hose For Dredging Project: Special Rubber Hose: The products are with long- wear life.We provide technology,design suggetion,hose inspetion and testing service. Feeding Rubber Hose: The products are with quick connect coupling material that is cast aluminum or cast iron.In this way,the rubber hose installation is quick and convenient. Prefabricated Rubber Bending Hose: Updating "Feeding Rubber Hoses" are used in more limited space,bigger pipe bending and the place where feeding hose cannot be used. (Large Diameter)Sand Discharge/Suction Rubber Hose: The internal and external rubber of the products are with wear-resistant material that is with NBR(acrylonitrile styrene butadience rubber),SBR(oil-extended styrene butadiene rubber),or PARA rubber. Light Sand Suction Rubber Hose: The products are used in sand suction by ship,sand flow operation. Heavy Sand Suction Rubber Hose: The products are used in land waste suction,pebbles suction,slurry suction by equipments. The Advantages of Rubber Hose For Dredging Project: 1Good Flexibility and resist impact of external forces. 2Wear resistance. 3 Enduring high temperatures

Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.

Valves & forged fittings..

ADVANCED DREDGE RUBBER HOSE FOR SALE Dredge hose and rubber are specialized, robust tubes designed to facilitate the removal of sediment and debris from the bottom of water bodies, such as rivers, harbors, and seas. Engineered to withstand the harsh conditions of dredging operations, these dredge hoses are made from high-quality, wear-resistant rubber materials that ensure durability and flexibility. The construction of these dredge rubber hoses allows them to handle heavy materials, including sand, mud, and rocks, while resisting abrasion, UV radiation, and chemical exposure. The flexible dredge hoses are also designed to absorb vibrations and shocks, minimizing the risk of damage during operation. Available in various diameters and lengths, dredging rubber hoses are essential for efficient and effective dredging projects, providing a critical connection between the dredging equipment and disposal sites. Their reliability and performance make them a preferred choice for maintaining waterways, preventing flooding, and facilitating maritime navigation.

Details of dredge hose: Structure: dredge hose is composed of three parts: tube, reinforcement and cover. Tube is made from the mixture of high quality EPDM and natural rubber, making the dredge hose resistant to abrasion and corrosion. Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening. Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance. Temperature range: -20 Inner diameter: 6" - 50" (152 mm - 1300 mm). Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm). Working pressure: 0.5 Mpa - 1.2 Mpa. Burst pressure: 1 Mpa - 2.4 Mpa.

Color: Orange,yellow, or customized colors like red, blue, green, black, etc. Material: PE shell with PU foam inside, galvanized or stainless steel fasteners. Cusomized Design: Available. Dredging pipefloat are made from high wear resistance PE by rotational molding technology. One complete dredging pipefloat consists of two halves filled with PU foam which are connected by galvanized bolts, nuts and washers. The reasonable structure makes the dredging pipefloat perform well in tough dredging condition.

Type Car Charger, USB Socket, Power Outlet Charging Port 2 Ports Connection USB Port Warranty 12 months Voltage 12-24v DS2017 Design Style New China-Chic Product name 12V Dual Car USB Charger Socket 5V 4.2A 2.1A Power Outlet Material ABS+PC Fireproof Material Input Voltage DC 12V-24V Output Voltage DC 5V 4.2A (2.11A & 2.1A) Application 12V -24V Cars, Bus, Marine, etc. Certificate CE,ROHS LED Color Blue Red Orange Green White Color Black Function Remote Control Usage Mobile Phone, GPS, Camera, Digital Devices Power Charging -Broad Compatibility Unlike other car chargers, DIY USB outlet designed with a rubber USB cover makes it with life waterproof and dust-proof. It not only fits for DC 12-24V automobile but also have a perfect performance on boat, marine, motorcycle, 4-wheels, RV etc.

Tube: Smooth NR/ synthetic rubber, generally color is black Reinforcement: spiral fabric, steel wire spiral layer, Cover: Oil, abration and weather-resistant wrapped synthetic rubber. Performance: 1. Rubber hose pipes are used with dredgers for silt/gravels conveyance. 2. Pipe wall thickness range: from 20mm up to 50mm. 3. The suitable working temperature: from -20�°C to +80�°C. 4. Abrasion-resistant and bending â??resistant. 5. It is convenient to install, flexible to use and safe. Dredge Slurry Suction Hose Applications: installed between the pump and cutter of the dredger, suction the slurry. suction hose &Aamored hose with HB steel ring in, suitable for limestone, granite, coral and mineral, etc.

Dredging projects can be divided into several types, including capital construction dredging project for port and shipping lane construction, maintenance dredging to the operated port and shipping lane to guarantee enough navigation dimensions, environmental dredging for the silt cleaning of river, lake and sea, dredger filling projects to strength the coast protection or land reclamation. So silt dredge hose is need in these projects, which is mainly used for the suction and discharge of silt. Silt dredge hoses, also called slurry dredge hose, are usually installed on the two sides of the dredge pump to suck and discharge silt. They are easy to install and remove due to the unique construction of flanges on the each end of hose. Silt dredge hose is very flexible and stable, and it can reduce the vibration caused by storm and water movement. It is highly resistant to abrasion and aging. Silt dredge hose consists of tube, reinforcement and cover. The tube is made from the mixture of natural rubber and synthetic rubber, mainly EPDM, making the silt dredge hose resistant to abrasion, corrosion and aging. Reinforcement of silt dredge hose is made from multiple synthetic fabrics with spring helix steel w ire, making the hose have very high tensile strength and have the ability of absorbing shock and vibration. The cover is made from SBR, which makes silt dredge hose resistant to cut, abrasion, corrosion, weather, ozone, sunlight and aging. Many silt dredge hoses are on the ground Silt dredge hose. A silt dredge hose with black flanges. Silt dredge hose with black flanges. Details of silt dredge hose: Structure: silt dredge hose is composed of three parts: tube, reinforcement and cover. Tube is made from the mixture of high quality EPDM and natural rubber, making the silt dredge hose resistant to abrasion and corrosion. Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening. Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance. Temperature range: -20 ¡ãC to +40 ¡ãC. Inner diameter: 6" - 50" (152 mm - 1300 mm). Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm). Working pressure: 0.5 MPa - 1.2 MPa. Burst pressure: 1 MPa - 2.4 MPa. The specification of silt dredge hose Hose code ID OD Working pressure Burst pressure Length inch mm inch mm MPa bar MPa bar m SFH-01 6 152 7-1/4 182 1.2 12 2.4 24 20 SFH-02 8 203 9-1/5 233 1.2 12 2.4 24 20 SFH-03 10 254 11-1/5 284 1 10 2 20 10 SFH-04 12 304 13-2/5 340 1 10 2 20 6 - 10 SFH-05 14 350 15-2/5 390 1 10 2 20 6 - 10 SFH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10 SFH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10 SFH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10 SFH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10 SFH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10 SFH-11 40 1000 41-1/2 1050 0.5 5 1 10 6 SFH-12 48 1200 49-1/5 1250 0.5 5 1 10 6 SFH-13 52 1300 53-1/5 1350 0.5 5 1 10 6

Dredge hose can be used to handle many types of media such as slurry, silt and sand for its excellent abrasion resistance. And it is also used to handle seawater. This is seawater dredge hose. It is mainly used for the suction and discharge of seawater. Our seawater dredge hose is composed of three parts: tube, reinforcement and cover. The tube is made from the blend of EPDM and natural rubber, which makes the seawater dredge hose highly resistant to abrasion, corrosion, aging and weather. So it can transport the corrosive medium - seawater. The reinforcement is made from spring helix steel wire with multiple synthetic textile, making the seawater dredge hose resistant to kink. And the reinforcement provides full vibration dampening. The cover is made from super high quality neoprene, which makes the seawater dredge hose resistant to corrosive salt water, cut, abrasion, weather, ozone and aging. Our seawater dredge hose is designed specially to handle seawater, so our engineers choose appropriate materials for the hose. Therefore, it can be competent the job well. Besides, the diameter, length and tube thickness of our seawater dredge hose can be customized according to your requirements. A seawater dredge hose with red flanges. Seawater dredge hose. Many seawater dredge hoses are on the ground. Seawater dredge hose cross section. Details of seawater dredge hose: Structure: seawater dredge hose is composed of three parts: tube, reinforcement and cover. Tube is made from the mixture of high quality EPDM and natural rubber, making the seawater dredge hose resistant to abrasion and corrosion. Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening. Cover is made from high quality neoprene for seawater, ozone and sunlight resistance. Temperature range: -20 ¡ãC to +40 ¡ãC. Inner diameter: 6" - 50" (152 mm - 1300 mm). Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm). Working pressure: 0.5 MPa - 1.2 MPa. Burst pressure: 1 MPa - 2.4 MPa. The specification of seawater dredge hose Hose code ID OD Working pressure Burst pressure Length inch mm inch mm MPa bar MPa bar m SWDH-01 6 152 7-1/4 182 1.2 12 2.4 24 20 SWDH-02 8 203 9-1/5 233 1.2 12 2.4 24 20 SWDH-03 10 254 11-1/5 284 1 10 2 20 10 SWDH-04 12 304 13-2/5 340 1 10 2 20 6 - 10 SWDH-05 14 350 15-2/5 390 1 10 2 20 6 - 10 SWDH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10 SWDH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10 SWDH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10 SWDH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10 SWDH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10 SWDH-11 40 1000 41-1/2 1050 0.5 5 1 10 6 SWDH-12 48 1200 49-1/5 1250 0.5 5 1 10 6 SWDH-13 52 1300 53-1/5 1350 0.5 5 1 10 6

Product Name:- Rubber Hose. Product Raw Material:- NBR, VTC, POLYACRALIC, SILICON, NATURAL Size & Colour:- As per Customer Requirement Price:- Depend On Size Application:- Automotive Non Automotive

Self Floating Hose Dredging Self-floating hoses are suitable for the harshest sea or mining conditions. Equipped with PE foam body, adjusted to the bouyance of the dredged material. It's available inner diameters up to 1200mm, various lengths and pressure ranges. Features 1. Outer cover with excellent abrasion resistance and UV protection. 2. Inner layer with excellent abrasion resistance and high quality. 3. Single foam flotation casing to prevent water absorption. 4. Wearing colored indicator layer. 5. Area above water not less than 20% of total volume. 6. Bending angle: in working condition ,the bending angle is from 0�°to 45�°. 7. Low center of gravity, strong anti-wave ability, good stability. 8. Easy installation, good adhesion, long service life. 9.The product can be customized according to clients' requirements.

PRODUCT DESCRIPTION PERFORMANCE: The hoses are used for silt/gravels conveyance with Dredgers. The suitable working temperature is from -20 Celsius degrees to 80 Celsius degrees. It is convenient to install, flexible to use, safe, abrasion-resistant and bending-resistant. 1. ID: 152-1300mm 2. OD: 182-1350mm or more. 3. Working pressure: 5-25bar 4. Burst pressure: 10-75bar 5. Vacuum pressure: 0.8bar 6. Length: 1-6m 7. Internal rubber layer: NR, SBR, BR 8. Reinforcement layer: Steel wire spiral reinforced layer. 9. External rubber layer: NR, SBR, BR 10. Flange: Chinese standard, American standard, Japanese standard, German standard etc. Are available. 11. Application: Used for port, dock, seawater, silt, sand, discharge flood etc. 12. Character: Flexible, Anti-waves, Wear-resistance, Weather-resistance, Aging-resistance, seawater resistance 13. Temperature: From -30 Degrees Celsius To 80 Degrees Celsius. 14. Guarantee period: 6 months or longer Note: Above text contained is provided for general reference purposes only. Products can be manufactured according to customers' requirements and Drawings