Floating Hose

pay much attention to wear resistance, tensile strength, bending capacity and pressure rating for self-floating hoses.The self-floating hoses are fixed with flanges at both ends and the usual length is 11.5m. Introduction of Self-floating Hose Color: Black with orange rings around the hose. Material: Rubber with thick PU foam, carbon steel flanges at both ends Ranges: Inner diameter from 150mm to 800mm Delivery: The floating hose inner diameter larger than 500mm always shipped by top open containers.

Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.

Construction: Tube:SBR, NR, BR. Reinforcement:�Tire cord with helix wire and floating material layer. Cover: SBR and CR blend. Description: Inner cover is excellent abrasion-resistance. It can protect the hose from the friction of depositional silt. And the colored indication layers can reflect the degree of the abrasion effectively. This can guarantees the normal use of the floating hose. Application: Floating high pressure rubber hose �is used with dredgers for silt/gravels conveyance. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on. Characters: 1. Outer cover with excellent abrasion resistance and UV protection. 2. Inner cover with excellent abrasion resistance and high quality. 3. Wearing colored indicator layer. 4. Single foam flotation casing to prevent water absorption. 5. Can bear the high pressure of work. 6. The size of flange is at customers' request. 10. We can produce the hose up to ID1300mm, or as customers' requirement. Specification: Inside�Diameter Working�Pressure Burst�Pressure Vacuum�Pressure Adhesive Strength Abrasion�Value Length mm inch Mpa bar Mpa bar Kpa bar KN/m Cm3 ft m 254 10 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 304 12 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 350 14 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 400 16 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 450 18 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 500 20 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 550 22 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8 600 24 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 800 32 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 850 34 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 900 36 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1000 40 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1200 48 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8 1300 52 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8

Supplier: Marine floating hose, dredging hose, grade rubber hose, air, water hose, steam/hot water hose, food grade hose

Zebung chemical transfer hoses were developed to be a more flexible chemical hose that could handle 98% of all chemicals including solvents and corrosive liquids for pressure and suction service. These hoses are suitable for tank trucks, barges, ships or storage tank transfer for a variety of chemical materials. The clear UHMW PE tube is mostly inert and will withstand highly corrosive products and avoid contamination through breakdown. Abrasion and Ozone Resistant The cover protects the body from stiffening and cracking caused by ozone and UV exposure. It also adds abrasion resistance for extended hose life. Non-Kinking The internal helical wire structure helps prevent kinking. Multi -Ply Acid Discharge Hose Designed to handle most of the common acids and alkali solutions under pressure. Multi-Ply Acid Suction Hose This hose features a high-tensile textile cord with wire helix to prevent collapse under vacuum conditions. Recommended Cleaning of Chemical Hose 1. Drain the hose after each use. 2. Flush with water or other neutralizing cleaning solution. 3. Properly dispose of drained fluid and cleaning waste. 4. Between uses, store the hose in a clean, dry environment away from sunlight. 5. Avoid cross contamination. Dedicate a hose to handle a specific chemical.

Inner rubber: sbr Reinforcement layer: tire cord with helix wire Cover rubber layer: sbr and cr blend Safety factor: 1:3 Water hose are widely used in delivering industrial water, industry manufacture, mining, construction project and so on. The mail characteristics are more flexible, aging-resistance and ozone resistance. Woven bag in roll, according customers required

Supplier: Dredge suction hoses, dredge discharge hoses, dredge floating hoses, armored hoses, reducers , bends, expansion joints

Supplier: Air hose , water hose , oil hose , water suction and discharge hose, water discharge and suction hose , dredging hose , floating hose

mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.