Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Ferrosilicon is often used as deoxidizer in steel making, and it is also beneficial to improve the temperature of molten steel when it is produced with a large amount of heat during the generation of SiO2. Silicon also can be used as an alloy element joining agent, widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, silicon in the ferroalloy production and chemical industry, commonly used as a reducing agent. Grade SI Al P S C CR TI Packing FeSi75A 74.0-80.0 - 0.035 0.02 0.1 0.3 - As clients demands FeSi75B 72.0-80.0 - 0.04 0.02 0.2 0.5 - FeSi65 65.0-72.0 - 0.04 0.02 - 0.5 -
Fesi75% si 75%, c 0.1% max, al 1.5% max, p 0..035% max, s 0.025% max Size: 10-50mm 90% min Inspection: ciq Quantity: 100*500mt *3 months 1mt bag
Fesi75% si 75%, c 0.1% max, al 1.5% max, p 0..035% max, s 0.025% max Size: 10-50mm 90% min Inspection: ciq Quantity: 100*500mt *3 months Http://ferroalloy.Raintreeintl.Com 1mt bag
Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus It is wildly applied to such industries as chemical industry, metallurgic industry, and gas- making industry to produce calcium carbide, ferroalloy, ferrosilicon.
Features Of Micro Silica (Silica Fume) Micro Silica also known as Silica fume. It is a by product of producing silicon metal or ferrosilicon alloys in smelter using electric arc furnaces. It is a grey coloured powder, pozzolanic in nature. Applications Concrete Industry Refractory Rubber Industry Anti caking agent Pellet Binder
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking. Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel. Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers. The role of Ferrosilicon in Steelmaking: In steelmaking, Ferrosilicon is used for:
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
We supply #ferrosilicon at competitive prices. Si: 70-75 % Al: 1.2-2 % C: 0.15-0.2 % P: 0.05-0.04 % S: 0.05-0.03 % Size: 10-60 mm
Technology date Rating 350a co2 Duty cycle 60% Wire size 0.8-1.2mm One set per box, 5 boxes per carton
Dear Customers, We can supply used/rejected Refractory in Bulk Currently we can supply 500 MT High Alumina bricks 20000 MT Mag Carbon Grog Contact us for more information
Microsilica (silica fume) is a by-product from silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. White Cement advantages: Sustainability: Solar Reflectance Index (SRI): Floors finished with white or pastel color concrete will have a much higher SRI than floors with gray concrete, therefore they will reflect light better, and generate energy savings for the lifetime of the floors. Reduction of Heat Island effect: By constructing buildings with white concrete roofs or light-colored roof tiles, the Heat Island Effect is reduced from surfaces generating less heat and improved reflectivity. Architectural Concrete: White Portland Cement is ideal for decorative concrete and Architectural Concrete applications, Masonry and Cementitious Building Products. A key advantage of using white cement for these applications is that it provides a base color that can be tinted to custom colors to meet any color spectrum demand.
Microsilica (silica fume) is a by-product of silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. Physical characteristics: Color: gray or gray white powder Bulk density: 320-700 kg/m3 Chemical composition: Items SiO2 Al2O3 Fe2O3 MgO CaO Na2O Moisture Content 75-98% 1.0-0.2% 0.9-0.3% 0.7-0.1% 0.3-0.1% 1.3-0.2% Fineness: the fineness of the silica fume is less than 1 1/4m, and the average particle size is 0.1 0.3 1/4m, and the specific surface area is 20 - 28 m2/g. The fineness and specific surface area are about 80-100 times of cement and 50-70 times of fly ash. Maxtech Micro Silica supplies will be as per QCS 2014 (ASTM C1240): SiO2: >/= 92% LOI:
Ferrosilicon is rich in silicon elements, silicon as an important raw material in steelmaking can treat oxygen in steel, thus reducing the production of oxides, significantly reducing impurities in the molten steel, and promoting the flow properties of the molten steel, causing changes in the form of inclusions and floating on the surface of the molten steel, thus improving the purity and quality of the molten steel. The elemental silicon in Ferro Silicon 75# is â?¥75%, which is a common smelting material in steel mills. We strictly screen the raw materials, use staff with rich experience in production, and conduct laboratory tests on the Ferro Silicon 75 we produce to ensure the quality of our products. We have a rich transportation system to deliver Ferro Silicon 75% to all over the world, if you need it, I believe we are the best choice for you. Contact us soon and we will present you with a daily ferrosilicon quote!
Mag-COOH and Mag-OH are special ferrimagnetic, silica beads,developed for use in microfluidic and chip-based genomic setups. Intended for nucleic acid isolation from various sources(blood,cells,bacteria etc.) for manual and automated work-flow. Under specific conditions, the carboxylated or hydrolyzed beads surface enables higher yield and purity from samples. Ferrimagnetic core with silica shell Small bead diameter, providing a large active silica surface High yields and good nucleic acids quality Instant collection of ferrimagnetice beads even in a weak magnetic field Low magnetic remanance allowing easy resuspension
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
