Laser Chiller Suppliers and Manufacturers

Laser chiller is a specially designed and manufactured industrial chiller for laser machine in the laser industry or laser processing. There are kinds of Laser machines, The major laser machines used include fiber laser, Yag laser, CO2 laser, laser welding, and brazing, laser marking and engraving, cladding and coating, UVLED curing machine, etc. TopChiller is a leading manufacturer of air chiller, water chiller and portable chiller for the laser industry. Whether it is for Yag lasers, CO2 lasers, fiber lasers, laser welding, and brazing, laser marking and engraving, cladding and coating, UVLED curing machine. Laser chillers designed and manufactured by TopChiller are the best water cooling system for your laser industry. When it comes to precise temperature control for your resonator and optics, TopChiller has a complete line of laser chillers to meet your special demands. The laser chiller cooling capacity range is from 1.5KW to 88KW.

Model Item AL-15W Nominal cooling capacity kcal/h 35948 Kw 41.8 Input power kw 16.42 Power supply 3pH~380V 50Hz Refrigerant type R22 Type of control thermostatic expansion valve Compressor type hermetic scroll(piston) Power(kw) 13.72 Condenser type finned copper tube + low noise outer rotor fan Cooling air flow(m3/h) 15000 Evaporator type tank with coil Chilled fluid flow(m3/h) 7.2 Volume(L) 270 Inlet and outlet pipe diameter (inch) 2 Drain(inch) 1 Pump power (kw) 1.5 Lift(m) 26 Flow switch On >16L/min, Off

S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool 1KW laser source of IPG, MaxPhotonics and nLIGHT. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision ±0.5â?? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H) Package dimension 87 x 60 x 109 cm (L x W x H)

Quick Details Condition: Customize Type: Laser water chiller Place of Origin: Guangdong, China (Mainland) Brand Name: Hailing Model Number: HL-01A Cooling Capability(kw): 2.94 Voltage: 380/415V Dimension(L*W*H): 680*420*720mm Weight: 60kg Certification: CE, ROHS, CE Warranty: 1 Year After-sales Service Provided overseas service provided Pump: YUAN LI/NAN FANG evaporator: HAILINGKE Refrigerant: R22/R134a/R407c Compressor Brand: SANYO/Copeland Condensater: shell and tube Packaging & Delivery Packaging Details:Wooden Case

Laser Chiller Features 1. Cooling capacity of CW 5000 laser chiller: 800W; use environmental refrigerant; 2. Compact size, long working life and simple operation; 3. ±0.3â?? precisely temperature control, ±0.1â?? temperature control is optional; 4. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 5. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 6. Multiple power specifications; CE approval; 7. Optional heater and water filter. Parameters Introduction of CW 5000 Laser Chiller CW 5000 laser chiller adopts the new imported famous brand compressor and large flow and high lift pump, safety and environmental protection, energy saving and durable. Spare parts: Most parts use the "Baodian" original products, various model configurations, stable performance, long service life. Laser Chiller Applications One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature. CW-5000AG laser chiller: applied to cool a single 100W CO2 laser tube ; CW-5000AI laser chiller: applied to cool a single 5W-10W solid-state laser ; CW-5000AH laser chiller: applied to cool a single 5KW spindle or welding equipment. Laser Chiller CW 5000 Specification Model CW-5000AG CW-5000BG CW-5000DG CW-5000AI CW-5000BI CW-5000DI Voltage 220V 220V 110V 220V 220V 110V Frequency 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz Current 1.4~2.1A 3.5~5.6A 1.4~2.1A 3.5~5.6A Compressor power 0.295KW 0.38KW 0.305KW 0.295KW 0.38KW 0.305KW Refrigeration capacity 0.692KW 0.879KW 0.84KW 0.692KW 0.879KW 0.84KW Refrigerant R-22/R-134a Refrigerant charge 360g 380g 350g 360g 380g 350g Precision ±0.3â?? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm Pump power 28.8W 0.1KW Tank capacity 9L Inlet and outlet External Φ10mm Tower shaped joint Diameter Φ10mm speedy connector Max. lift 8M 25M Max. flow 10 L/min 16 L/min N.W 28 Kgs G.W 31Kgs Dimension 56 X 28X 47 cm (L X W X H) Package dimension 72 X 44 X 57 cm (L X W X H) Note: other electric sources can be customized; heating and higher temperature control precision functions are optional . Laser Chiller Packing We use strong carton as the package of laser chiller. If the user have the request to use wooden case, we can make it.

Introduction of CW 3000 1. BAODIAN CW 3000 belongs to the Radiating type industrial Chiller/cooling machine. 2. Its main function is laser cooling to heat the air on the device for heat exchange with the environment. 3. CW 3000 chiller temperature is affected by ambient air temperature, so it's thermostat can not be artificially adjusted. 4. Water chiller price is competitive. Features of CW 3000 Chiller 1. Radiating capacity of CW 3000 industrial chiller: 50W/°C; 2. Small thermolysis water cooler, energy saving; 3. Long working life and simple operation; 4. With completed water flow and over high temperature alarm functions; 5. Multiple power specifications; CE approval. Specification of CW 3000 Laser Chiller CW-3000AG laser cooling chiller: applied to cool a single 80W CO2 laser tube (emitting rate lower than 60% CW-3000AK laser cooling chiller: applied to cool four 1.5KW CNC spindles or welding equipment. Model CW-3000AG CW-3000DG CW-3000AK CW-3000DK Voltage AC 1PH 220V AC 1PH 110V AC 1PH 220V AC 1PH 110V Frequency 50/60Hz Current 0.45A 0.9A 0.5A 1.0A Radiating capacity 50W/â?? Tank capacity 9L Inlet and outlet External Φ10mm brass connector Φ8mm speedy connector Max. lift 10M Max. flow 10L/min Protection Flow alarm N.W 10Kgs G.W 12Kgs Dimension 47 X 26 X 38cm (L X W X H) Packing dimension 59 X 39 X 48cm (L X W X H) Best Water Chiller Price Baodian is manufacturer of laser water chillers. It offers the attractive water chiller price. There are laser water chiller, fiber laser chiller, yag laser chiller, cnc router spindle chiller, etc.

S&a water chiller for laser hair removal machines S&a water chiller cw-6100 is developed and produced by s&a supplier of china. Cw-6100 has 4.2kw cooling capacity, ±0.5? stability, and multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; since january 2016, the warranty period of s&a chiller has extended to 2 years. Cw-6100 water chiller parameter: ModelCw-6100ahCw-6100bhCw-6100aiCw-6100biCw-6100anCw-6100bn Voltage220v220v220v220v220v220v Frequency50hz60hz50hz60hz50hz60hz Current1~6.5a1.5~7a 2~7.5a Compressor power1.38kw1.29kw1.38kw1.29kw1.38kw1.29kw 1.84hp1.72hp1.84hp1.72hp1.84hp1.72hp Refrigeration capacity14483btu/h14092btu/h14483btu/h14092btu/h14483btu/h14092btu/h 4.24kw4.13kw3.38kw4.24kw4.13kw3.38kw 3650kcal/h3551kcal/h3650kcal/h3551kcal/h3650kcal/h3551kcal/h RefrigerantR-22/r-410a Refrigerant charge950g900g950g900g950g900g Precision ±0.5? ReducerCapillary ProtectionOvercurrent protection for compressor, flow alarm, over temperature alarm Pump power 0.05kw0.1kw0.37~0.75kw Tank capacity15l Inlet and outletRp1/2" Max. Lift12m25m28~53m Max. Flow13l/min16l/min70l/min N.W65kgs77kgs G.W75kgs87kgs Dimension67 x 47 x 89 cm (l x w x h) Package dimension74x 60 x 109 cm (l x w x h) Contact s&a Tel:+86-20-89301885, Fax:+86-20-84309967 Skype: teyuchiller Email:marketing@teyu.Com.Cn Website: http://www.Teyuchiller.Com About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist on”quality first” in design and production. “s&a” and “teyu” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60%. -

Water cooler for fiber laser cutting machine Cw-5300 water cooler is developed and produced by s&a company, applied to cool fiber laser cutting machine S&a cw-5300 series is high-precision compression refrigeration compact water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system. Rature alarm; 5. Multiple power specifications; ce approval; rohs approval; 6. Long working life and simple operation; 7. Optional heater and water filter. Specifications: One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically Switch to appropriate operating temperature. Cw-5300ah : applied to a cool single 150w co2 laser tube; Cw-5300ai : applied to a cool single 200w co2 laser tube, a single 100w laser diode, a single 50w-75w solid-state lase, a single 100w co2 rf laser tube, a single 18kw cnc spindle or welding equipment; Optional: cw-5302 dual water inlet and outlet series; heat booster; water filter. About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist on quality first in design and production. ¡¡ãs&a¡¡à and ¡¡ãteyu¡¡à have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60% Contact s&a Te:+86-20-89301885 Fax:+86-20-84309967 Skype: teyuchiller Email:marketing@teyuchiller.Com Website: http://www.Teyuchiller.Com The chiller is packed in standard export carton.

Model: CW-6000AG Voltages AC220~240V Frequency 50Hz Current: 1~4.2A: Refrigerating output: 7711Btu/h Refrigerant: R22 Refrigerant weight: 650 g: Capacity: 15 L Inlet and outlet hold Max pumping lift: 10 M Maximum- flow: 10 L/min N.W: 59 KG G.W: 69 KG Dimensions: 60X47X87 cm (L x W x H) Packing dimensions: 72X59X109 cm ¡¡¡¨¬o¡¡¡¡ì¬(L x W x H) Standard export packing

Introduction of CW 6000 Laser Chiller Laser Chiller adopts the reputed imported compressor and high flow high head pumps, safety and environmental protection, energy saving and durable. The majority of chiller service parts used on the laser chiller are original product, model configuration and diverse, stable performance, long service life. Baodian CW-6000 series is high-precision compression refrigeration small water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. Laser Chiller Application One-stop automatic intelligent temperature control in laser water chiller: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature with high chiller efficiency. CW-6000AH: applied to cool three 100W CO2 laser tubes or four 80W CO2 laser tubes; CW-6000AI : applied to a cool single CO2 100W RF laser tube; CW-6000AN: applied to a cool a single 100W solid-state laser or a single 22KW CNC spindle; Optional: CW-6000 dual water inlet and outlet series; heat booster; water filter. CW 6000 Laser Chiller Specification CW 6000 laser chiller parameter Model CW-6000AH CW-6000BH CW-6000DH CW-6000AI CW-6000BI CW-6000DI CW-6000AN CW-6000BN CW-6000DN Voltage 220V 220V 110V 220V 220V 110V 220V 220V 110V Frequency 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz Current 1~4.5A 1~10A 1.5~5.5A 1.5~10.5A 2~6A 2~11A Compressor power 0.965KW 0.895KW 1.12KW 0.965KW 0.895KW 1.12KW 0.965KW 0.895KW 1.12KW 1.28HP 1.22HP 1.52HP 1.28HP 1.22HP 1.52HP 1.28HP 1.22HP 1.52HP Refrigeration capacity 10286Btu/h 9502Btu/h 10724Btu/h 10286btuh 9502Btu/h 10724Btu/h 10286btuh 9502Btu/h 10724Btu/h 3.015KW 2.785KW 3.145KW 3.015KW 2.785KW 3.145KW 3.015KW 2.785KW 3.145KW 2592Kcal/h 2395kcal/h 2711Kcal/h 2592kcal/h 2395kcal/h 2711Kcal/h 2592kcal/h 2395Kcal/h 2711Kcal/h Refrigerant R-22/R-410a Refrigerant charge 800g 750g 650g 800g 750g 650g 800g 750g 650g Precision ±0.3°C Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm Pump power 0.05KW 0.1KW 0.37~0.75KW Tank capacity 15L Inlet and outlet Rp1/2" Max. lift 12M 25M 28~53M Max. flow 13L/min 16L/min 70L/min N.W 60Kgs 72Kgs G.W 70Kgs 82 Kgs Dimension 67 X 47 X 89 cm (L X W X H) Package dimension 74 X 62 X 109 cm(L X W X H) Note: the specification of water pump is selected according to different application; other electric sources can be customized; heating and higher temperature control precision functions are optional.

S&A compact laser chiller for visual orientation tour edge laser cutting machine A laser company buys S&A chiller CW-5000 to cool visual orientation tour edge laser cutting machine. S&A CW-5000 compact chiller with long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3â?? precision. Itâ??s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)

S&A water chiller for laser machines and CNC milling machines A client is from Russia engaged in the supply and sale of laser machines and CNC milling machines. He has purchased S&A water chillers CW -6100 as standard cooling system. S&A chiller CW-6100 is developed and produced by S&A supplier of China, it has 4.2KW cooling capacity, ±0.5â?? stability, and multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. CW-6100 water chiller parameter: Voltage:220/110V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 69Kgs; G.W: 82Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)

Laser water chiller for co2 rf metal laser tube Cw-6100at laser water chiller is developed and produced by s&a company, applied to cool co2 rf metal laser tube. Cw-6100at air cooled chiller is dual temperature and dual pump chiller of 4200w cooling capacity. It is able to cool the fiber laser and optic lens at the same time, multiple use for saving cost, space and manual move, quiteconvenient for 7. Multiple power specifications; ce approval; rohs approval; 8. Long working life and easy operation; About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist on quality first in design and production.

Air cooled chiller for laser welding system Cw-6000 air-cooled chiller is developed and produced by s&a company, applied to cool laser welding system. Cw-6000 water-cooled chiller has 3000w cooling capacity with ¡À0.5¡æ precisely temperature control, and has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Fiber laser water-cooled chiller parameter: Voltage:110v-220v; frequency: 50/60hz; refrigerant: r-22 / r-410a Pump power: 0.05kw/0.1kw/0.37~0.75kw; tank capacity:15l Dimension : 67 x 47 x 89 cm (l x w x h); packing dimension: 74 x 60 x 109 cm(l x w x h) About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist on quality first in design and The chiller is packed in standard export carton. 74 x 60 x 109 cm(l x w x h), g.W£¡§70kgs£© 67 x 47 x 89 cm (l x w x h), n.W 60kgs

S&A CW-5000 small portable chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in 0.3 precision. It's mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)

S&A chiller with temperature control for diode-pumped laser S&A CW-6000 chiller has 3000W cooling capacity with 0.5 stability, it is fit for diode-pumped laser.It has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. Water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)

Water Cooled UV Curing Systems Shenzhen Lando Company supply for Portable Laser Water Chillers cooled uv led curing systems and Uv Light Curing Equipment.Our Water Chillers Systems which cooling light curing systems ,also our industrial laser water chillers would be application for cooler CO2 tube . UV LED Curing Water Cooled Performance : ?Application : UV LED Curing Water Cooled , UV Printer Chillers or other industrials . ?One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically ?switch to appropriate operating temperature. Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Industrial Water Chillers Cool CO2 Laser Tube Main Feature: * Compact thermolysis type industrial water chiller * Long working life and simple operation * Equipped with water flow alarm and over temperate alarm * Radiating capacity: 50W / °C * CE and ROHS certified * Power supply: 110 V or 220 V * Multiple alarm functions: Compressor time-delay protection, compressor over current protection, water flow alarm and over high / low temperature alarm www.lando-chillers.com Email : sales@cnlando.com

Authentic S&A manufacturer Buy CW-5000 water chillers directly from S&A Competitive price, Fast Delivery. Get a Quotes Now! Portable water chiller CW-5000 is widely applied in cooling different kinds of CO2 laser machines, including CO2 laser cutting machines, CO2 laser engraving machine and so on. It is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A), a professional China-based chiller unit manufacturer with 16-year experience. S&A small water chiller CW-5000 covers 50% market share of CO2 laser refrigeration market due to its superior cooling performance, precise temperature control, compact design and ease of use. It has an annual sales volume of 30,000 units and it is very popular in Europe, South America, Asia and other foreign markets. Characterized by the cooling capacity of 800W and temperature control accuracy of ±0.3, S&A portable water chiller CW-5000 can bring down the temperature of the equipment very efficiently, greatly improve the working life and ensure the stable performance of the equipment. S&A small water chiller CW-5000 has two temperature control modes, including intelligent and constant temperature control modes. Purified water or clean distilled water is suggested to be used as circulating water of S&A chiller CW-5000. Warranty is 2 year. CW-5000 portable water chiller video: https://www.teyuchiller.com/ce-approved-industrial-chiller-cooled-chiller-cw-5000-video_n34 CW-5000 small water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 16 years of developing and producing industrial water chillers, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages: 1. With 11 patent certificatesï¼?ISO, CE, RoHS and REACH compliant; Conforms to air transport requirements; 2 years warranty 2.±0.1 high precision temperature control, stable cooling performance, support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages: 1. Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Annual output 60,000 units, product exports rate above 60%ï¼? 3. Standard bulk production, standard parts rate up to 80% ï¼? 4. With excellent laboratory testing system, simulates actual working environment for chiller.