S&A chiller with temperature control for diode-pumped laser
S&A CW-6000 chiller has 3000W cooling capacity with 0.5 stability, it is fit for diode-pumped laser.It has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years.
Water chiller parameter:
Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a
Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L
Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min
N.W: 60Kgs; G.W: 70Kgs;
Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Laser cutting (84561000)
S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool 1KW laser source of IPG, MaxPhotonics and nLIGHT. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision ±0.5â?? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H) Package dimension 87 x 60 x 109 cm (L x W x H)
S&A CW-5000 small portable chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in 0.3 precision. It's mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
Vidhya Ispat Udyog offers a diverse range of CNC laser cutting parts crafted with precision and expertise to meet the exacting standards of modern industrial applications. Utilizing state-of-the-art CNC technology, our laser cutting process ensures unparalleled accuracy and consistency in every component produced. Our CNC laser cutting parts are manufactured from premium-grade materials, guaranteeing superior durability, strength, and precision. Whether you require intricate designs, complex shapes, or high-volume production, our CNC laser cutting capabilities enable us to deliver solutions tailored to your specific requirements. From sheet metal components to structural elements, our CNC laser cutting parts find applications across various industries, including automotive, aerospace, electronics, and more. Trust Vidhya Ispat Udyog for high-quality CNC laser cutting parts that deliver exceptional performance, reliability, and efficiency in every application.
S&A water chiller CWFL-1500 for cooling 1500W metal fiber laser machine Laser industrial refrigeration chiller CWFL-1500 is produced by Guangzhou Teyu Electromechanical Co., Ltd. For over 16 years in screening and training, we integrate lots of superior components suppliers. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term. CWFL-1500 is special for cooling 1500W metal fiber laser cutting & engraving machine. S&A dual temperature chiller model CWFL-1500 is high-precision compression refrigeration industrial cooling system,with intelligent temperature control,completed configuration,perfect protection and alarm system. It is applied for cooling 1500W fiber laser. S&A CWFL-1500 is able to cool the fiber laser and QBH connector at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. CWFL-1500 chiller features: 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Water chiller parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.55KW; Tank capacity:15L Max. lift:45M; Max. flow: 70L/min N.W: 86Kgs; G.W: 96Kgs; Dimension : 78 X 47 X 89 cm (L X W X H); Packing dimension: 87 X 60 X 109 cm(L X W X H)
S&A chiller for cnc router and co2 laser machines S&A brand CW-5200 chiller is fit for cooling cnc router and co2 laser machines. Its cooling capacity up to 1.4KW , ±0.3â?? temperature control precision and temperature control range in 5-35â??. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. chiller CW-5200 specfications: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 26Kgs; G.W: 29Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year,we always insist onâ?�Quality Firstâ?� in design and production. â??S&Aâ?� and â??TEYUâ?� have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad and export rate reaches above 60%.
S&A chiller CW-6100 for woodworking and laser machines S&A chiller CW-6100 is developed and produced by S&A supplier of China, it is fit for cooling woodworking and laser machines. CW-6100 has 4.2KW cooling capacity, 0.5 stability, and multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. CW-6100 water chiller parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 65Kgs; G.W: 77Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)
S&A chiller for high power fiber laser system of 1KW capacity S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool high power fiber laser system of 1KW capacity. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. 0.5 precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision 0.5 Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H)
