Detailed selling lead description
A copper coiler with 32 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy.
1) material:
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy or stainless steel
C) bracket: galvanized steel or aluminum alloy
2) solar vacuum tube:
A) size: 58 x 1, 800mm
B) quantity: 20 / 24 / 30pcs
C) hail resistance: diameter 25mm
3) temperature insulation layer:
A) 50mm imported polyurethane, keep same temperature and high pressure foam
B) heat preservation: 72 hours
4) capacity: 200 / 240 / 300 liters
5) tank diameter: 420 / 460mm
6) max. Pressure bearing: 0.6mpa
7) iso9001 / ce certificate/en-12975
8) 3 years' international responsibility for free repairing or exchange due to original
Quality problems
Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ
Products intro
The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.
Working principle:
1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically
2) the circulation pump makes heat-conducting liquid circulate automatically
3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank
4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device
5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically
Feature:
1) collector separates with the storage tank. The tank can be put anywhere of the house
2) and the collector can be put on both tilted roof and flat roof
3) module design, arbitrary combination, harmony with the building perfectly
4) intelligent control and automatic operation
5) anti-freeze: no water inside the tubes when it works
6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
7) multifunction: bathing, washing, domestic heating
8) workable at anytime and enjoyableouter
Features of separate pressurized system:
* strong hydraulic pressure makes your bathe more comfortable
* modularized collector, arbitrary combination
* intelligent controlling and multiple functions
* arbitrary combination with structure of your beautiful constructions
* separate installation conveniently
* working with assistant resource
* full set of original equipment, the life time will be much longer to ensure better using
* material
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy
C) bracket: aluminium alloy
Sc-c01
Sc-c01(separate pressurized solar collector)
The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style.
Can endure high pressure when it works.
Module design, optional combination, which can meet the demand of large water consumption.
Material: aluminum alloy
Solar vacuum tube with heat pipe
A) size: 58 x 1, 800mm
B) qty of tube: 15 / 20 / 25/30pcs
C) hail resistance: diameter 25mm
Insulation layer in chest
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam
B) heat preservation: 72 hours
Max. Pressure bearing: 0.6mpa
Iso9001 / ce certificate/en-12975
3 years international responsibility for free repairing or exchange due to original quality problems
1, manifold : red copper
2, manifold casing: aluminum alloy
3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m
4, heat preservation: 72hrs
5, hail resistance: 25mm
6, max pressure: 10 bar
7, working pressure: 6 bar
8, coating of vacuum tube: ss-c/cu
9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c
Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system.
High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.
17936 Integrative Pressurized Solar Water Heater Suppliers
Short on time? Let Integrative Pressurized Solar Water Heater sellers contact you.
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ
Products intro
Sc-b01
Pipeline is made of all red copper and conducted by heat transfer medium liquid
To save place and simple to install
Suitable for families who can not put vacuum tubes on their roofs
Stable and reliable performance
Fashionable and beautiful
It is harmoniously blended with architecture
Environmental protection and energy saving
* material
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy
C) bracket: aluminium alloy
* solar vacuum tube with heat pipe
A) size: 58 x 850mm
B) qty: 8 / 10 / 12pcs
C) hail resistance: diameter 25mm
* temperature insulation layer
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam
B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters
* max. Pressure bearing: 0.6mpa
* iso9001 / ce certificate/en-12975
* 3 years international responsibility for free repairing or exchange due to original quality problems
1.Non-pressure one pipe inlet-outlet:
Characteristics:
This type uses the all-glass evacuated solar collector tubes as the heater-absorbing element. The high vacuum degree of the clearance between the out and inner tube reduces the heat emission. The layer films(coating) of all-glass evacuated tubes transfer the sun energy into heat energy. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down,The water in the storage tank will be heated this natural circulation.
Material:
Ocean01
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: SUS304-BA,0.4mm
d. Frame: SUS202,1.2mm
e. The material of insulation: polyurethane
Ocean02
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: drawbench silver steel,0.4mm
d. Frame: coated galvanized steel-1.5mm
e. The material of insulation: polyurethane
Ocean03
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: drawbench silver steel,0.4mm
d. Frame: Aluminium alloy, 2.5mm
e. The material of insulation: polyurethane
Split pressurized flat plate solar water heaters
Characteristics:
a. Collector separates with the storage tank. The tank can be put anywhere of the house
b. And the collector can be put on both tilted roof and flat roof
c. Module design, arbitrary combination, harmony with the building perfectly.
d. Intelligent control and automatic operation
e. Anti-freeze: no water inside the tubes when it works
f. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
g. Multifunction: bathing, washing, domestic heating
h. Working at any time and enjoyable.
Material:
Ocean04
a. Vacuum tube: GB-CU-SS-N/AL-58-1800
b. Inner tank: SUS304-2B,1.2-2.0mm
C. Out tank: Painted steel-0.4mm
d. Frame: Aluminum alloy,2.0mm
Integrated pressurized flat plate solar water heater
Characteristics:
a. It is completely made of copper, good performance under pressure; the black-chrome-plated copper-strip and copper-pipe is welded by ultrasonic welding machine
b. The black-chrome-plated coating has excellent quality, with high absorption efficiency and low emissivity
c. The coating is resistant to high temperatures of 220 centigrade., the performance and quality of collector will not be affected; materials and coatings can bear fierce weather and have long life span; endothermic copper-strip with Nickel-plated has excellent resistance to corrode, which can be used more than 15 years.
Material:
Ocean05
a. Inner tank: SUS304-2B,1.2mm
b. Core: black chrome
C. Out tank: Drawbench silver steel, 0.4mm / stainless steel,0.4mm
d. Frame: Aluminum,2.5mm
Flat plate solar water heaters.
Commodity Integrative Pressurized Solar Water Heater
Vacuum Tube : 47mmX1500mm, 58mmX1800mm
Amount of Vacuum Tube: 16 / 18 / 20 / 24 / 30 / 36
Material Inner tank: SUS304 stainless steel
Outer tank: Galvanized steel alloy
Bracket: Galvanized steel alloy
Heat insulation layer: Imported polyurethane
Heat pipe: straight copper pipe
Thickness Inner tank: 1.2mm
Outer tank:0.4mm
Bracket::1.5mm
Heat insulation layer: 50mm
Working Temp 99 Celsius degree
Working Press 1.0MPa (10 bars)
Coloration as per
Accessories Assistant tank and electrical heater
Certificate ISO9001:2000, CE
Warranty 5 years for full system / 15 years for vacuum tube
MOQ negotiation
Lead time within 15 days for full container at factory
Payment Telegraphic Transfer (T/T), Letter of Credit (L/C)
Separate pressurized solar water heater, integrative pressurized solar water heater, regular solar water heater, integrative coiler solar water heater.
KES58
Vacuum tube: 58x1800mm
Inner tank: Stainless Steel 304 2B food grade
Outer tank: Aluminum Galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: Aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
tubes with capacity 135L up to 325L
Note: 1. with heater exchanger 12mm,max.pressurized 8bar;
2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole;
3.the air vent hole can connected with central heat supply pipe to heat the tank wate
Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.
SYSTEM DESCRIPTION
VISION VPF series solar water heater usually incorporates a number of high efficiency flat panels, a top situated high pressure hot water tank, supporting bracket and accessories.
MAIN FEATURES
Reliable collector with average daily efficiency over 54.1%
High efficiency flat panels for fast direct water heating
System works without high temperature problem
High pressure hot water supply from storage tank
Compatible with electric or gas heating devices
Working all year round even in cold climate
Designed for 25 years working life
SPECIFICATION
Tank capacity: 100; 150; 200; 250; 300 Liter
Flat panel size: 2000*1060*82 MM ( L*W*H )
Cover glass: Low-iron tempered glass with transmittance =92%
Absorber coating: Selective black chrome or blue TiNOX coating
Header and riser: High-quality red TU1 copper tubes 22MM inlet outlet
Frame material: Anodized aluminum alloy with anti-aging elastic sealing
Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L
Tank insulation: High-density PU foam with 80 hour heat preservation
Outer tank material: High-quality color steel or stainless steel
Bracket material: Galvanized steel; stainless steel; aluminum alloy
Accessories: Solar controller; electric heater; magnesium anode
Bracket angle: 25°; 38°; 45°
Working pressure: 6.0 bar
Working life: 25 years
Solar water heater, integrative pressurized solar water heater, pre-heating solar water heater, split solar water heaters with heat pipe, split falt solar water heater, solar non-pressuirzed and pressurized tanks.
Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L)
Specialty
1. Economical type for most of area, common people can afford it
2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid
3. Mature technology and stable operation
4. Higher efficiency on photo thermal conversion.
5. Accessory is popular and easy maintenance
Solar water heater Specifications:
1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm
2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm
3) Inner tank of solare water heater: SUS304 food grade stainless steel.
4) solar water heater Outer tank: Stainless steel, 0.4mm
5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L
6) Thickness of solar water heater bracket: 1.5mm
7) Glass vacuum tube of solar water heater: 58mm X 1800mm
Remark:
1. Solar heat storage tank diameter(mm): 460mm/480mm
2. Thickness, insulated(mm): 50mm
3. Vent connection(inch): 1/2''or /3/4''
4. Electric heater: 47mm 1500W, 3/4''
5. Water connection(inch): 1/2'' or 3/4''
6. Collector angle(degree): 25-45
Sfct, split pressurized system for residential
A solar water heating system includes three parts, it is collector, water tank and pump station.
This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl...
Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant.
Model number collector model collector absorber area tank capacity(l/gal)
Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40
Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40
Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50
Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80
Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80
Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130
Sfct, split pressurized system for residential
A solar water heating system includes three parts, it is collector, water tank and pump station.
This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl...
Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant.
Model number collector model collector absorber area tank capacity(l/gal)
Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40
Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40
Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50
Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80
Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80
Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130
1. Uni-directional heat transmission
2. Can start from lower temperature
3. Faster transmission
4. Lower heat capacity
5. Low temperature resistance
6. Freeze-proofing
7. High frequency soldering inner tank
8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system
9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,
10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
Ke58s
Vacuum tube: 58x1800mm
Inner tank: stainless steel 304 2b food grade
Outer tank: aluminum galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
Tubes with capacity 135l up to 325l
In cartons
17936 Integrative Pressurized Solar Water Heater Suppliers
Short on time? Let Integrative Pressurized Solar Water Heater sellers contact you.
