Specifications Aac condcutor Concentric al stranded condcutor Standards: iec, astm, bs, nfc, csa, etc. Code: iris, aster etc. Overhead line conductor aac 1. Application: Bare conductor made of aluminium wire stranded and corrugate aluminium pipe, maily used as busbar of subsationsin high altitude, widely used in power plant, and substation, especially used as busbar of substation over 2000 meter of altitudes 2. Series: Bare conductor are covering series of conductor, aac, aaac, acsr, acar etc. Corrugated aluminium pipe busbar, made of aluminium wires or aluminium alloy wires stranded around aluminium pipe. 3. Specification: can be produced up to 600-1600 sqmm (equal to aluminium's section-area) 4. Standards: the products can be made complying with the standards: iec, bs, din, astm, csa, etc
Concentric lay stranded conductor consisting of Aluminum Alloy 1350-H19 wires. AAC conductor is also known as aluminum stranded conductor. It is manufactured from electrolytically refined aluminum, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminum conductors are made up of one or more strands of aluminum wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
AAC Conductors are made out of Hard drawn EC Grade (min 61% IACS) Aluminium wires stranded in successive layers in opposite direction to form the Aluminium stranded AAC Conductor up to 61 wires. All Aluminium Conductors are manufactured from electrolytically refined aluminium. They have a high level of purity; the minimum accepted level of aluminium is 99.7%. This product is also known as aluminium stranded conductor, as it is constructed of one or more strands of aluminium wire depending on the intended usage. As a consequence of this high level of purity, AAC Conductors are mainly used in areas where spacing is short and supports are close. Key Benefits : All aluminium bare conductors are used for aerial distribution lines having relatively short spans, aerial feeders and bus bars of substations. Standards: ASTM - B 231 Metric Units ASTM - B 231 TS IEC 1089 DIN 48201 BS 215 UNE 21.018
http://www.overhead-cable.com/AAC_Conductor.html
High quality, seamless performance, high strength, weather & temperature resistance, and smooth operation are some of the salient features of our provided AAC conductors. These are resistant to chemicals, oil, water, moisture, etc. As made using modern machines and quality materials in accordance with defined parameters of the arena. Thus, we are known as a principal manufacturer, supplier and exporter of AAC conductors. Besides, these are available at competitive prices in various specifications. Due to all, these are massively demanded among the users. Features: , reliable. , faultless. , seamless performance. , timely delivery
1. korea cosmetic 2. korea cosmetic raw material 3. consumer goods 4. korea materials, parts, eqipments.We offer all cosmetics from korea. we are connected to various partners, so we can supply a wide range of products at the lowest prices. we also offer beauty and plastic surgery products. in addition, we supply various korean materials, parts, and equipment.
Construction This bare concentric-lay stranded conductor is constructed with a straight round central aluminum wire surrounded with one or more layers of helically-laid aluminum wires. These conductors are also manufactured as compact conductors if required. 6201 is also available. Standard ASTM B230, B231,IEC, or other standards required by customers. Applications Sino-cables type AAC is suitable for 1.Class AA as bare conductors usually used in overhead lines. 2.Class A as conductors to be covered with weather resistant materials and for conductors where greater flexibility is required. z Package in coil, steel and wooden reel, steel reel, wooden reel.
STANDARD:ASTM B231, CSA C 49,BS 215, DIN 48201, IEC 61089, etc CAPACITY:2000ton/month All Aluminum Conductors are widely used for its following features: Optimum economy is provided since the lighter weight means lower unit length coats, easier handling in installation and less-complex fittings. All-aluminum conductors have an inherent high corrosion resistance due to their homogeneous construction. AAC conductor has high current carrying capacity It is widely used for its excellent resistance to corrosion, thus ideal for use in coastal areaSuitable for low & medium voltage lines in urban are. Specification Applicable standards: ASTM/BS/CSA/DIN/IEC standards Concentric lay stranded Aluminium Conductor (AAC) is made up of one or more strands of hard drawn 1350 aluminum alloy. Bare all-aluminum Conductors (AAC) are concentric-lay-stranded, consisting of one or more layers of wire wrapped helically around a straight round central wire. Each successive layer has six wires more than the layer immediately beneath. Greater flexibility is provided by increasing the number strands for a specific cross-sectional area. The more commonly used strandings are 7, 19, 37, 61 and 91.
AAC conductor is also known as aluminium stranded conductor. It is manufactured from electrolytically refined aluminium, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Powerï¼? 900W LED Qtyï¼? 72pcs 5W LED & 6pcs 90W COB Voltage ï¼? AC85-265V Work frequencyï¼? 50/60Hz Lumen ï¼? >15400Lm Dimmensionï¼? 660X385X118mm N.W ï¼? 11.4kg Coverage ï¼? 1.0Ã?1.2 m Warranty ï¼? 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours
Bare Conductor Aac/aaac/acsr
Conductor
Bare conductor
Bare Conductor AAC/AAAC/ACSR
Bare Conductor AAC/AAAC/ACSR
http://www.zmscable.com/ACSR-conductor.html
