Hot Air Oven Suppliers and Manufacturers

these are sturdy double walled units with outer chamber made of M.S/S. steel-304 grade sheet duly powder coated Bi-colour with inner chamber are made of S.S sheet 304 grade. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses.Beaded heating aliments are placed in ribs, at bottom and sides.Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by imported hydraulic type capillary thermostat/Digital Temp. controller from 50 deg to 250 deg plus minus 1 deg. An-L shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. ( Only Thermostatic controlled oven ) Air ventilators are also provided on the sides of the unit. To work on 220/230 volts A.C.

Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white uniform heating in range of 50oC to 250oC + 1oC controlled by capillary type thermostat. Control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase. Size in MM 300 x 300 x 300

Features: 1. Transverse wind cycle structure, conducive to air mixing, high space utilization, fast drying rate. 2.Convenient operating, fixed value operating, timing operating, automatic stop. 3. The special function keys to achieve temperature setting. 4. Auxiliary menu, realized over-temperature alarm, deviation correction, menu locking. 5. Forced fan cooling intake structure, so that the maximum operating temperature of the fan doesnt exceed 50. Long service time. 6.Corrosion resistance, furnace using high-quality anticorrosive coating. Technical parameter: Temperature Control Range: DG series: Room temperature +10~250 WG series: Room temperature +10~300 Temperature fluctuation: ±1 Operating Ambient temperature: 5~50 Security Over-temperature alarm, Menu locking

DE-109HOT AIR OVEN UNIVERSAL (MEMMERT TYPE) ALTIS MAKE CE Certified These are sturdy double walled units with outer chamber made of M.S. sheet duly powder coated paint with inner made up of or S.S. sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by DIGITAL Temp. Controller from 50 0C to 250 0C ± 1 0C. Air ventilators are also provided on the sides of the unit. To work on 220/230 volts A.C., Air Circulation fan also provided. With 2 Shelves. Inner Chamber Sizes Capacity 300 x 300 x 300 mm. 28 ltrs. 355 x 355 x 355 mm. 45 ltrs. 455 x 455 x 455 mm. 95 ltrs. 455 x 455 x 605 mm. 125 ltrs. 605 x 605 x 605 mm. 224 ltrs. 605 x 455 x 910 mm. 252 ltrs. 605 x 605 x 910 mm. 336 ltrs.

Hot air oven Ramcolab hotairoven made from inner ss, outer ms with powder coating finish. Temp control for digital temprature indicator cum controller. Temp range : up to 250 deg c accuracy : + - 1 deg c Size : 14 x 14 x 14" Size : 16 x 16 x 16" Weight : 25 kg

Digital Hot Air Oven

Oven is a thermostat controlling the temperature. Hot Air Oven are digitally controlled to maintain the temperature. The Hot Air Oven is created from double-walled construction that is designed to hold in heat and reduce energy output. Double walled, inside stainless steel and outside made of mild steel finished in superior quality enamel paint, glass wool insulation 65 mm between the two walls ensuring maximum thermal efficiency. Heating elements are placed in ribs at the bottom & sides. This oven is known for excellent storage capacity, longer service life and perfect finish. In order to fulfill the variegated demands of clients, this oven is made available in various sizes and specifications. This oven is made using premium quality materials that are procured from authorized vendors of the market. Hot Air Oven is duly checked on various parameters to ensure perfect finish.

Bdi-50 Hot air universal oven (memmert type) (Three side heating elements) Standard double wall fabrication, Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 50° C to 250° C ± 2° C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase. Chamber size in mm / Inches No. of Capacity H W D (Approx.) Shelves (Approx.) a) 300 x 300 x 300 (12” x 12” x 12”) 2 28 ltrs. b) 350 x 350 x 350 (14” x 14” x 14”) 245 ltrs. c) 450 x 450 x 450 (18” x 18” x 18”) 295 ltrs. d) 600 x 450 x 450 (24” x 18” x 18”) 2 125 ltrs. e) 600 x 600 x 600 (24” x 24” x 24”) 2224 ltrs. f) 900 x 600 x 450 (36” x 24” x 18”) 2252 ltrs. g) 900 x 600 x 600 (36” x 24” x 24”) 2336 ltrs. h) 900 x 900 x 900 (36” x 36” x 36”) 3480 ltrs. Optional: i) Air circulating fan. ii) Timer 0-24 hours iii) Imported Thermostat “EGO” / “JUMO” German with the Accuracy of ± 1°C. iv) Digital temp. Indicator-cum-Controller. v) Microprocessor PID digital temp. Indicator-cum-controller.

Hot-Air-Oven - Laboratory oven

Features: 1. Transverse wind cycle structure, conducive to air mixing, high space utilization, fast drying rate. 2.Convenient operating, fixed value operating, timing operating, automatic stop. 3. The special function keys to achieve temperature setting. 4. Auxiliary menu, realized over-temperature alarm, deviation correction, menu locking. 5. Forced fan cooling intake structure, so that the maximum operating temperature of the fan doesnt exceed 50C. Long service time. 6.Corrosion resistance, furnace using high-quality anticorrosive coating. Technical parameter: Temperature Control Range: DG series: Room temperature +10~250C WG series: Room temperature +10~300C Temperature fluctuation: 1C Operating Ambient temperature: 5~50 C Security Over-temperature alarm, Menu locking

LABROID Hot Air Oven are double walled insulation keeps the heat in and conserves energy, the inner layer being a poor conductor and outer layer being metallic. Hot air ovens are electrical devices which use dry heat to sterilize, specifically designed to meet the challenging demands of various Laboratory for individual and specialized research applications. Construction: Double walled: Outer wall of Mild steel powder coated or Stainless Steel and inner chamber of Stainlesssteel 304. Temperature Range: +50C to 280°C. (On Request above 280°C) Controller: Microprocessor based controller with LED Display, PID Digital Temperature Indicator cum Controller, with dual display of set Value and Process value for precise control of temperature. Accuracy: ± 2 C Resolution: 0.1 C Door: Main Door with Rubber Gasket. Trays: Adjustable-Stainless Steel. Alarm: Audio / Visual Alarms for Temperature Deviations Safety Features: Safety standby thermostat to cut off heater supply in case of overshoot of temperature. Power Supply: Single phase 230V, 50Hz, AC mains.

Hot Air Reflow Soldering Oven

Hot Air SMT Reflow Oven,Lead Free Reflow Oven

HOT AIR OVEN Search for hot air oven laboratory suppliers manufacturers in india (Laboratory Oven, (MITEC-101) Temperature range upto 250-450° C, +/- 1 degC controlled by either thermostat or Microprocessor based PID Digital Temperature Indicator -cum - controller. Double wall body with 5 side insulated with high grade glass wool. Inside chamber consists of Aluminium / Stainless Steel, outside comprises of Mild Steel MS body supplied with or without Air circulating fan. Workable on 220/230 V AC or 110-120V. Inclusive of Air Circulating Fan Timer 0-24 hours Microprocessor based PID Digital Temperature Indicator-cum-controller. Product code size in mm size in inch capacity in ltr MITEC-101-1S 300 x 300 x 300 12 x 12 x 12 28 MITEC-101-2S 355 x 355 x 355 14 x 14 x 14 45 MITEC-101-3S 405 x 405 x 405 16 x 16 x 16 65 MITEC-101-4S 455 x 455 x 455 18 x 18 x 18 95 MITEC-101-5S 605 x 455 x 455 24 x 18 x 18 125 MITEC-101-6S 605 x 605 x 605 24 x 24 x 24 224 MITEC-101-7S 910 x 605 x 455 36 x 24 x 18 252 MITEC-101-8S 910 x 605 x 605 36 x 24 x 24 336 MITEC-101-9S 910 x 910 x 910 36 x 36 x 36 730 displayes for laboratory hot air oven suppliers manufacturers This page is displayed and related to hot air oven manufacturer hot air oven suppliers scientific laboratory lab equipments instruments price stainless steel SS mild steel MS Andaman and Nicobar Islands Port Blair Andhra Pradesh Hyderabad Arunachal Pradesh Itanagar Assam Dispur Bihar Patna Chandigarh Chhattisgarh Raipur Dadra and Nagar Haveli Silvassa Daman and Diu Daman National Capital Territory of Delhi Delhi Goa Panaji Gujarat Gandhinagar Haryana Chandigarh Himachal Pradesh Shimla Jammu and Kashmir Srinagar Jammu Jharkhand Ranchi Karnataka Bengaluru Kerala Thiruvananthapuram Lakshadweep Kavaratti Madhya Pradesh Bhopal Maharashtra wrist action shaker Mumbai Nagpur Manipur Imphal Meghalaya Shillong Mizoram Aizawl Nagaland Kohima Orissa Bhubaneswar Puducherry Pondicherry Punjab Chandigarh Rajasthan Jaipur Sikkim Gangtok Tamil Nadu Chennai Tripura Agartala Uttar Pradesh Lucknow Uttarakhand Dehradun Paschim Bangal Kolkata -

1. The brand computer and Siemens PLC intelligent control system, high precision temperature control is ± 1-2 â?? (if the computer crash accident, it can realize off-line work, do not affect production) and to ensure that the control system is stable and reliable; 2. Windows XP operating interface with powerful and simple operation. 3.In order to ensure safety and reliability, the cylinder body can be lift up automatically. 4. Device is equipped with mesh belt, transport smoothly, no shaking and no deformation, which ensure smooth PCB transport. Synchronous guide transmission mechanism and automatic SMT machine online connection ensure that guide adjustable wide precision and high service life.