Melt Flow Index Tester indicates the uniformity of the flow rate of the polymer. This instrument measures the rate of extrusion of Molten resins through a drill of specified Length and diameter under prescribed conditions of temperature, load, and piston position. This test method covers measurement of rate of extrusion of molten resins through a die having bore diameter of 2.095 mm and a specified length of 8 mm within a stipulated time. Accordingly the unit of MFI is reported in grams/10 minutes. There are different test conditions based on the standard chart for Temperature Vs Fixed load for checking such melt index. Additionally two more tests could be incorporated in this same melt indexer such as MVR (melt volume-flow rate) and melt density for thermoplastics. We offer various different models seen below depending on technical features and operations comfort of the user.
Oven is a thermostat controlling the temperature. Hot Air Oven are digitally controlled to maintain the temperature. The Hot Air Oven is created from double-walled construction that is designed to hold in heat and reduce energy output. Double walled, inside stainless steel and outside made of mild steel finished in superior quality enamel paint, glass wool insulation 65 mm between the two walls ensuring maximum thermal efficiency. Heating elements are placed in ribs at the bottom & sides. This oven is known for excellent storage capacity, longer service life and perfect finish. In order to fulfill the variegated demands of clients, this oven is made available in various sizes and specifications. This oven is made using premium quality materials that are procured from authorized vendors of the market. Hot Air Oven is duly checked on various parameters to ensure perfect finish.
Moreover, post manufacturing process is passed through a series of tests to make sure that we are offering an absolutely defect-free range. This system is designed and manufactured in adherence to the set industry standards using excellent quality raw material and advanced technology. Extensively appreciated by our clients due to its efficient performance, robust construction, compact design, durability and easy installation, we offer this Laminar Air Flow at an industry leading price to the clients.
Salt spray test is also called as Fog Test. This is an accelerated environmental corrosion test in which metal specimens are exposed either continuously or intermittently to a fine mist of salt-water solution used to evaluate the resistance to corrosion of paints, coatings, or electrical connections. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends of the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. In the salt spray test cabinet painted coated panels, automobile components i.e. Electro-plated, Painted, and Anodized etc are exposed to a mist of salt over a period of test duration. Saturated air produced by spraying common salt solution into an enclosed cabinet creates humid atmosphere up to 98%.That’s why we are able to provide best quality Salt Water Spray Chambers and that too at reasonable prices.
This B.O.D. incubator is reckoned within the marketplace for its options like durable construction, high performance, safe operation, wonderful functionality and long service life. Offered in several technical specifications as per the requirements of purchasers, this BOD Incubator manufacturer is using prime quality elements and is extensively demanded in food, medical, chemical and pharmaceutical industries. The offered B.O.D. incubator is available with us at the foremost affordable price range.
This Range Includes Ceiling Suspended Laminar Air Flow, Movable Laminar Air Flow Supplier, Vertical Laminar Air Flow And Horizontal Laminar Air Flow. Moreover, Our Laminar Air Flow Is Extremely Demanded By The National As Well International Shoppers, As A Result Of Their Unique Options And Efficiency.
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Brand Honeywell Total Weight 11 Kg Model Number T8000 Alarm Activation 55+-5 Bar Alarm Volume 90 dBA Approve Temperatures 60 Degree Celsius Apparatus Type Approvals EN 137:2006 Type 2 Filling Pressure 300 bar Volume of Air 2040 Litre Operating Temperature +60 Degree Celsius The Honeywell T8000 Self-Contained Breathing Apparatus (SCBA) is a type of respiratory protective equipment designed to provide breathable air in a hazardous or contaminated environment. It consists of a backpack containing a compressed air cylinder, a regulator to control the flow of air, and a mask or hood that covers the user's face. The T8000 model features a lightweight and ergonomic design, a high-performance demand valve, and a user-friendly interface. It is typically used in industries such as firefighting, mining, and chemical processing, as well as by first responders in emergency situations.
