Introduction: 4-hydroxyethyl piperazine ethosulfonic acid (HEPES) is an important hydrogen ion buffer, which has a good buffer ability in the pH range of 6.8 to 8.2, and can control a constant pH for a long time. Using a concentration of 10 ~ 50mmol/L, the general culture medium containing 20mmol/L 4-hydroxyethyl piperazine taurine can have a good buffer capacity, and has no toxic effect on cells. Application: HEPES (4-hydroxyethyl piperazinethesulfonic acid) is a non-ionic amphoteric buffer with high polarity, and is inert to a variety of chemical reagents and enzymes. It does not participate in and interfere with the process of biochemical reactions, and has no inhibitory effect on enzyme chemical reactions. Therefore, it can be used specifically for the research of proteins and enzymes that are highly volatile and ph-sensitive to organelles and very volatile. Buffer solution preparation: (1)hepes buffer can be directly added to the prepared culture medium according to the desired concentration, and then filtered to remove bacteria. 2.38 g HEPES was added to each 1000ml of culture medium, the pH was adjusted to 7.2 with lNNaOH after dissolution, and the bacteria were removed by filtration before use. At this time, the concentration of HEPES was 10mmol/L. (2) 100x storage solution (lmol/L) could also be prepared. Before use, 99ml culture solution was added to lml storage solution, and the final concentration was 10mmol/L. lmol/L (100x) hepes buffer was prepared as follows: 23.8gHEPES was dissolved in 90ml double distilled water, the pH was adjusted to 7.5-8.0 with lNNaOH, and then the water was fixed to 100ml, filtered to remove bacteria, divided into vials (2ml/ bottle), and stored at 4�ºC or -20�ºC. Purpose: 1.Biological buffer; Reaction buffer, prehybridization buffer and hybridization buffer for isolation and analysis of RNA nuclear fraction; For RNA with T4RNA 2.Molecular biology grade is used for RNA3' -end labeling with T4 RNA ligase 3.Cell-cell adhesion, short-term cell aggregation culture, cleaning of tissue and cell buffer
Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - Sampling, testing, and lab fees are not included because veterinary import requirements are not known - Visitation and selection costs by the buyer are not included
Improve breed like Boergoat for meat production. Same genetics only difference is colour (brown colour all round). Other traits the same as for Boergoat. Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaining at 4 monghs of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 â?? 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Improve breed like Boergoat for meat production. Same genetics the only difference is color (brown color all around). Other traits the same as for Boergoat. Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Other Name: HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID INCI Name: HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID Molecular Formula: C8H18N2O4S Molecular Weight: 238.3 Appearance: White powder Purity: 98% CAS NO.: 7365-45-9 EINECS No.: 230-907-9 Application: cosmetics and skin care products Supplier: ZHENYIBIO HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID has a certain effect of softening cutin and assisting in whitening; in cosmetics, it is a hydrogen ion buffer, which can control a constant pH range for a long time. Hydroxyethylpiperazine ethane sulfonic acid is a very effective biological buffer, which can reform the stratum corneum and promote the metabolism of skin keratinocytes. It is an important mild exfoliating ingredient.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
WE HAVE THE SUGAR IF YOU CAN LIVE WITH OUR TERMS BELOW. WE HAVE MADE AND ARE CURRENTLY MAKING DELIVERIES UNDER THESE TERMS. We, below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking. The issuance of a financial instrument (SBLC / DLC) can be replaced by a 30% guarantee deposit that will be applied in the last delivery of the contract (in the case of 12-month programs) or in the settlement of the single payment in the case of spot sales. This procedure applies to SPOT sales and 12-month Programs. MINIMUM SPOT ORDER IS 12,500 MT, NO EXCEPTIONS https://raargroupusa.com/icumsa-45-sugar We do offer container loads and spot orders of a minimum of 12,500 ton. We need to know your target price and delivery location in order to quote. Please send us your Target Price if you are serious.
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Inflatable Raft boat Specs: Raft-330 330 161 4+1+1 58 410 4 123*60*40 Raft-380 380 180 4+2+1 60 500 6 123*60*40 Raft-410 410 190 4+2+1 62 620 8 123*60*40 Raft-430 430 212 4+2+1 64 720 8 123*60*40 Raft-440 440 212 4+2+1 65 730 9 123*60*40 Raft-460 460 212 4+3+1 66 860 10 123*70*40 Raft-500 500 212 4+3+1 77 960 12 123*70*45 Raft-550 550 232 4 +4+1 85 960 14 140*75*45 inflatable raft boat, raft river boat, lake boat, white rafts boat, white river boat
Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates. The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs. Technical Specification: Protein: 16% to 22% Fat: 1.5% to 2.5% Fibre: 24% to 32% Ash: 2.5% to 6% Moisture: 10% to 12% As in reference to the supply of Alfalfa Hay, we would like to share following details related to same: Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process. The dry matter recovery is variable in nature. The dry matter means the hay residue of the same The pricing will fluctuate based on the dry matter recovery. The baling is done with a static baler in fixed size. During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green). Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay. Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total. The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments. The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.
1. Soya meal gmo & non gmo. 2. Canadian wheat 3. Canadian red lentil 4. Canadian green peace. 5. red seats oil. 6. soya oil. 7. white cane sugar icuma 45 8 urea fertilizer, sulphur 9. ethanol 10 . Degummed soya crude oil all shipment able to proceed, under 100% lc at sight condition.
Hawthorn berries contain antioxidants, therefore, they help improve blood circulation, regulate the contraction of the heart muscle and help cleanse blood vessels. Ursulic acid has a cardiostimulating effect and dilates blood vessels. Therefore, most often hawthorn berries are used to treat: angina pectoris; hypertension; arrhythmias; myocardial infarction. The biologically active substances that make up the hawthorn fruit have a calming effect, positively affecting the nervous system. Hawthorn berries are harvested during their full ripening from August to the end of October. Ripe berries are collected in bags or baskets, cutting off the whole inflorescence with berries or berries separately. The raw material is taken to a rockery where it is dried in a heated, temperature-controlled room. The berries are then cleaned of stalks and twigs, leaves, pips, defects, and unripe berries. * Wild-growing plants * Max drying temperature 50 degrees C * Humidity 8-9% * Purification method: color-sorting machine * Packaging weight 25 kg OR on request * Production capacity from 20 tons per season * High nutrient content from the south of Ukraine The price may vary depending on the volume and season. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)