Heavy Duty Paints For Drum Coatings
ITEM NO. : SB # 2202 S/3 DESCRIPTION : STORAGE BOXES TRUNKS Set of Three Finish : Leather Sizes : Large : 56 * 40.5 * 40.5 cm Medium : 48 * 34 * 34 cm Small : 40.5 * 28 * 28 cm
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
PU Paints
Emulsion Paints
Primer
Water Based Coatings - Primers, Gloss & High Scuff - High Gloss/High Slip - Duct Gloss & Matt - Specialty Coatings - Soft Feel / Satin / Neutral / Super Matt
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats. Size 5 litres 10 litres 25 litres Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified. Weight n/a Size 5L, 10L, 25L
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Size 750ml 5kg Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Winstrip 2 phase hot paint stripper Alu A Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80�°C, ideal for paint stripping systems. Call us and we will be happy to advise you. Size 5L, 10L, 25L, 200L
Winstrip 2 phase hot paint stripper Alu B Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80C, ideal for paint stripping systems. Call us and we will be happy to advise you
Size 5 litres 10 litres 25 litres 200 litres Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline" Specially developed for modern powder coatings. Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures) The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc. Call us and we will be happy to advise you
Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives Size 1 litre 5 litres 15 litres The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended. Weight 1 kg Size 1l, 5l, 15l
Well-adhering cutting oil foam for targeted application to the area to be worked on. Lubricates and cools cutting tools when drilling, thread cutting, turning, milling, sawing, etc. Extends tool life, water-soluble and washable with clean water. Biodegradable, free from chlorine, sulphur and mineral oils Weight 0.5kg Size 500ml
Colorless special adhesion promoter (primer) for almost all types of plastics. Transparent for subsequent painting. Sand plastics and prime once with primer spray. Size 400ml
