The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
Major technical specificationsíg Speedíg0.5-6m/min Min.Processed sizeíg100í±100mm Max.Processed widthíg3000mm Glass thicknessíg3-25mm Max.Arris grindingíg2.5mm Max.Hemline grindingíg3mm Angle rangeíg45óx Total poweríg 19.5kw Weightíg3200kg Overall sizeíg 6700í±1000í±2500mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises. Operate and maintain. Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute. Glass thickness is selected through a toggle switch linked to a servomotor and a digital display The arris wheels automatically adjust with each thickness selected. Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass. The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually. The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual. All motors are supplied according to clientÆs request, transformers are not used. Technical data Min. Process size:120mm*120mm Max. Arris angle:45¦ Glass process thickness:3mm-28mm Process speed:1.0-5.0m/min Spindles:9 Power18.5kw Overall dimension:6900*1200*2520(mm) Weight:2750kgs
Technical Date Spindles: 11 pcs Processing glass thickness: 3-25mm Angle of arris: 45 degree Min.size of glass: 80mm*80mm Processing speed: 0.5-4.5 m/mins Installed power: 22 KW Dimension: 7920Ã?1400Ã?2500mm General description ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually. Input and output conveyors adopt timing belt which can improve the stability of transmission. Speed is adjusted by frequency inverter or stepless speed variator. PLC with pneumatic polishing.
Technical Date Spindles: 9pcs Processing glass thickness: 3-25mm Angle of arris: 45° Min.size of glass: 80mm80mm Processing speed: 0.5~4.5m/min Dimension: 700014002500mm General description ZM9 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness. Glass thicknesses is adjusted by a inverter and showed on a digital display/ montior. A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually. Independent felt wheel and the cerium water recirculation system make the flat edge more shining. Input and output conveyor adopt timing belt which can improve the transmission precision. It is easy to operate and has good performance.
This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency. Technical specifications: Hym6320 1. The number of grinders: 6 2. Grinding speed: 500 ~ 2500mm/min 3. Glass thickness: 3 ~ 20mm 4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm 5. Power: 16kw 6. Weight: 2600 kg 7. Size: 6400 x 1200 x 2500mm Hym4320 1. The number of grinders: 4 2. Grinding speed: 500 ~ 2500mm/min 3. Glass thickness: 3 ~ 20mm 4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm 5. Power: 11.3 kw 6. Weight: 2300 kg 7. Size: 5900 x 1200 x 2500mm Packed by plastic film or wooden case.
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface. 1.2 operation condition 1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2% 1.2.2 ambient temperature: 1íµ~40íµ 1.2.3 r.H:
Fa9-325 glass straight line edging machine Major technical specification Size l -w -h) 7000í-1000í-2500mm Height of plartorm 750mm Weight 3200kg Voltage 380v, 50hz Power 18kw Feeding speeds 0.5-3m/min Scope procession max. Grinding straightedgesú¦3mm Maxú«grinding anglesú¦2.5mm Angles:45íp Glass plate size (max.)3000mmí-3000mm (min.)100mmí-l00mm Thickness of glass 3-25mm Grinding wheels:9, it is designedforstraightedges rough grinding, refined grindingú¼half-refinegrinding, grinding and polishing ofboth sides angle. Weight 4200kg Size: 4200*1100*1700
Glass Straight-Line Multilevel Edging Machine (9 Spindles) Technical Specifications: 1. Processing speed: 0.5~5 m/min 2. Min. processing size of glass: 150 x 150 mm 3. Max. processing size of glass: 2440 x 3660 mm 4. Glass processing thickness: 3~25 mm 5. Max. size of hemline grinding: 4 mm 6. Total power: 19 KW 7. Gross weight: 3300.00 kgs 8. Occupation area: (L x W x H) 8000 x 1700 x 2200 mm 7. Delivery time: 50 days
SK45-9(9 Spindles) High-class Glass Straight Line Multilevel Edging Machine is specially for grinding and polishing straight line flat edge and multilevel corner angle on different thickness of flat glass. The coarse grinding, fine grinding, polishing and angle-making cam be completed nicely in one time process. The motor assembles and adjusts in a large range. It uses stepless device to adjust the processing speed. It has many assembled forms to suit different demand of grinding and different glass products. High producing efficiency, easy operation and maintenance. It is one of indispensable glass deep-processing equipment for your glass factory!
Technical Date Number of Spindles: 20 (optional: 22 spindles with Low E deletion device, Extra-polish, Servo tracking Safety Corner Cutting) Max. glass dimension: Up to 4200 Min. glass size: 300x300 (optional: 250x250) Glass thickness: 3~25 mm Working Speed: 0.5-12 8m/mins Width adjustment Speed: 2m/mins (optional:8m/mins)
E adjusted smoothly by continuously variable mechanism transmission. 5. Adjust front rail to match different glass thickness. 6. The machine is equipped with automatic clamping system and voltage stabilizing system. 7. With easy operation, high precision and efficiency, this machine becomes one of indispensable equipment for glass procession.
Fa1200 glass washing machine Major technical specification Maximum processing width 1100í-2100mm Minimum processing width 100í-100mm Thickness of glass 2-12mm Maximum power 9kw Size(lxwxh) 3300í-1600í-1020mm Weight 800kg
Major technical specification Drill diameters ª¦4-ª¦220mm Thickness of processed glass 3-20mm Maxinum size of processed glass 2600í-2400mm Sizeú¿lí-wí-h) 2600í-2600í-1700mm Power 3kw Weight 1000kg
Major technical specifications Range of speed 0.3í½3m/min Min.Glass size 100í-100mm Glass thickness 3í½12mm Max.Bevel width 30mm Bevel angle 2oí½25o Total power 16.8kw Base dimension 7.3í-1.3í-2.1m
Drilling machine , glass lifting type automatic transfer table, glass straight line edging machine and glass shaped edging machine.
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing Wooden case or Plywood case
Glass straight line edging machine, glass straight line beveling machine, irregular glass edges grinding, glass washing machine, glass carving machine, glass drilling machine, glass washing basin heat bending.
Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation
Glass straight-line edging machine, glass straight-line beveling edging machine, glass complicated shape edging machine, glass inner and outer circle shape edging machine, glass drilling machine, glass automatic sanding machine, glass washing machine.
