The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
Major technical specificationsíg Speedíg0.5-6m/min Min.Processed sizeíg100í±100mm Max.Processed widthíg3000mm Glass thicknessíg3-25mm Max.Arris grindingíg2.5mm Max.Hemline grindingíg3mm Angle rangeíg45óx Total poweríg 19.5kw Weightíg3200kg Overall sizeíg 6700í±1000í±2500mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises. Operate and maintain. Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute. Glass thickness is selected through a toggle switch linked to a servomotor and a digital display The arris wheels automatically adjust with each thickness selected. Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass. The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually. The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual. All motors are supplied according to clientÆs request, transformers are not used. Technical data Min. Process size:120mm*120mm Max. Arris angle:45¦ Glass process thickness:3mm-28mm Process speed:1.0-5.0m/min Spindles:9 Power18.5kw Overall dimension:6900*1200*2520(mm) Weight:2750kgs
Technical Date Spindles: 11 pcs Processing glass thickness: 3-25mm Angle of arris: 45 degree Min.size of glass: 80mm*80mm Processing speed: 0.5-4.5 m/mins Installed power: 22 KW Dimension: 7920Ã?1400Ã?2500mm General description ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually. Input and output conveyors adopt timing belt which can improve the stability of transmission. Speed is adjusted by frequency inverter or stepless speed variator. PLC with pneumatic polishing.
Technical Date Spindles: 9pcs Processing glass thickness: 3-25mm Angle of arris: 45° Min.size of glass: 80mm80mm Processing speed: 0.5~4.5m/min Dimension: 700014002500mm General description ZM9 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness. Glass thicknesses is adjusted by a inverter and showed on a digital display/ montior. A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually. Independent felt wheel and the cerium water recirculation system make the flat edge more shining. Input and output conveyor adopt timing belt which can improve the transmission precision. It is easy to operate and has good performance.
This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency. Technical specifications: Hym6320 1. The number of grinders: 6 2. Grinding speed: 500 ~ 2500mm/min 3. Glass thickness: 3 ~ 20mm 4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm 5. Power: 16kw 6. Weight: 2600 kg 7. Size: 6400 x 1200 x 2500mm Hym4320 1. The number of grinders: 4 2. Grinding speed: 500 ~ 2500mm/min 3. Glass thickness: 3 ~ 20mm 4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm 5. Power: 11.3 kw 6. Weight: 2300 kg 7. Size: 5900 x 1200 x 2500mm Packed by plastic film or wooden case.
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface. 1.2 operation condition 1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2% 1.2.2 ambient temperature: 1íµ~40íµ 1.2.3 r.H:
E adjusted smoothly by continuously variable mechanism transmission. 5. Adjust front rail to match different glass thickness. 6. The machine is equipped with automatic clamping system and voltage stabilizing system. 7. With easy operation, high precision and efficiency, this machine becomes one of indispensable equipment for glass procession.
Supplier: Drilling machine , glass lifting type automatic transfer table, glass straight line edging machine and glass shaped edging machine
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing Wooden case or Plywood case
