Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
Number of Spindles: 20 (optional: 22 spindles with Low E deletion device, Extra-polish, Servo tracking Safety Corner Cutting)
Max. glass dimension: Up to 4200
Min. glass size: 300x300 (optional: 250x250)
Glass thickness: 3~25 mm
Working Speed: 0.5-12 8m/mins
Width adjustment Speed: 2m/mins (optional:8m/mins)
The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
24960 Glass Straight Line Double Edging Machine Suppliers
Short on time? Let Glass Straight Line Double Edging Machine sellers contact you.
This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency.
Technical specifications:
Hym6320
1. The number of grinders: 6
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 16kw
6. Weight: 2600 kg
7. Size: 6400 x 1200 x 2500mm
Hym4320
1. The number of grinders: 4
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 11.3 kw
6. Weight: 2300 kg
7. Size: 5900 x 1200 x 2500mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES.
Post consumer from sorting line.
Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe.
Can load in 1x40HC container aprox. 26 - 28 MT.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Spindles: 11 pcs
Processing glass thickness: 3-25mm
Angle of arris: 45 degree
Min.size of glass: 80mm*80mm
Processing speed: 0.5-4.5 m/mins
Installed power: 22 KW
Dimension: 7920Ã?1400Ã?2500mm
General description
ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time.
A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
Input and output conveyors adopt timing belt which can improve the stability of transmission.
Speed is adjusted by frequency inverter or stepless speed variator.
The Z M 9325 series glass straight line edging machine is suitable for different size and thickness flat glass grinding, it can rough grinding .fine grinding and polishing finish in one time;the polishing flat is similar to the smooth degree of glass body,while adjusting the different processing thickness,(you can refer the digital display in front beam to adjust);front chamferred motor can move syn chronically with front beam;with advanced structure,high precision,easy operation,It is the necessary tool for glass machinery.
wheaten flour noodle machine ,grains noodle machine ,fruit /vegetable noodle machine ,drying /fresh noodle machine and noodle process line ,capacity from 100kg-2T/hour ,for more big capacity can customized .
welcome cooperate!
Drying /Fresh noodle process line/production line
Noodle machine is a kind of equipment which can extrude flour into noodles with necessary tenacity and humidity by relative rotation of flour roller. It can be divided into simple noodle machine, automatic picking noodle machine, assembly line noodle machine, automatic spaghetti machine and so on.
The automatic noodle machine is easy to operate, safe and hygienic, and suitable for eyes. Stable transmission, accurate and efficient transmission power, low noise, no vibration, superior performance and other characteristics, can be equipped noodle drying equipment.
Capacity 150kg -1300kg/hour ,big capacity can customized . Noodle shape: round ,flat from 1.5mm-10mm big to 20mm .
Can equipment noodle drying machine ,noodle packing machine .
Cassava starch production line machine small capacity to big capacity design ,manufacture,installation ,training for clients .
Cassava starch production line machine process flowing : cassava feeding------first time drying washing (Remove impurities------second time water washing (Remove small impurities------crush ------Sieve off cassava residue------Starch milk purification------dewater drying ------ Screening packaging.
Whole process are sealing process no -touch hand keep sanitary ,good quality starch .
The starch are wildly use for raw materials such as food, medicine and cosmetics, textiles, papermaking, candy, beverages, feed, biodegradable materials, adhesives ,chemicals, ethanol/alcohol, etc.
Our canned fish process line high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating .
Canned fish process line production line machine Processing :
Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment .
(also offer canned fruit process line production line machine ,also can design canned fruit process line ) .
Offer customer after-sale service .
Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg
JHG offers ideal glass to use protecting the surface of tables and desks with any shape or style. We use the best glass cutters, edger and CNC for all complex shapes, hole locations, and perfect edge work.
24960 Glass Straight Line Double Edging Machine Suppliers
Short on time? Let Glass Straight Line Double Edging Machine sellers contact you.
