Specific parameters can be viewed in the attachment, all products can be customized
Induction Motor (single Phase)
NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start. Standard lot size , weight , dimensions
Ycl series single-phase heavy-duty capacitor started asynchronous motor is suitable for driving small lathe and water pump, especially good for families and workshops where only single-phase power is available.These series motors are designed with advanced technique and made of fine materials.It also has many other characteristics such as nice function, lower noise, lower temperature-rise and starting current, higher starting torque, reliable operation, easy maintenance and nice appearance.The ycl series motor is produced in conformity with iec standard. The ycl series motor is similar to yc series in appearance.Compared with yc series motor of same output the termal rise and starting current of ycl series motor on the average are reduced by 8.74k and 18.1a respectively, in the average, the efficiency go up by 4.21 percent, max-torque increase by 0.064, min-torque by 0.408, starting torque by 0.348 and power factor by 0.16.
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
An induction motor is an alternating current (AC) motor that uses electromagnetic induction to create torque
Big starting torque, low noiseip54, ip55insulation grade: frated voltage: 380v, 380v/660vrated frequency: 50hzeuropean ie2 standardmoter seat: 63-355power: 0.18kw-315kw. Wooden case fumigation certificate
Specific parameters can be viewed in the attachment, all products can be customized
Technical data Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Kg 2p=2 A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5 A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38 A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0 2p=4 A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0 A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0 A100lx-4ksr A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0 A100l-4ksr A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0 A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0 The electric motors can also be produced at different basic supply voltages and frequency. Three phase asynchronous electric motor with built-in electric-magnet brake Technical data Type Rated Output Basic Supply Voltage Duty Cycle Parameters at Rated output Starting Characteristics Rated brake (Stopping) torque Rated output of Brake electric Magnet Basic Supply Voltage of brake electric Magnet P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Nm - - A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40% to +20% of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 300-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
