EXPORT QUALITY PRODUCT Ritver Weather Guard is a water-based paint, it appears in matt/gloss finish and is excellent paints for all weather conditions. It provides excellent protection from rain, salinity, and UV rays. Excellent coverage
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
PU Paints
Emulsion Paints
Primer
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
Water Based Coatings - Primers, Gloss & High Scuff - High Gloss/High Slip - Duct Gloss & Matt - Specialty Coatings - Soft Feel / Satin / Neutral / Super Matt
PC natural 100% pure pc without any coating MATERIAL: PC natural 100% pure pc without any coating CATEGORY: PC TYPE: Natural SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 1450$ - 1700$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days Our Commitment We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation. 2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Water Paints
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
1 141-78-6 Ethyl acetate 2 79-20-9 Methyl Acetate 3 123-86-4 Butyl acetate 4 108-32-7 Propylene carbonate 5 75-12-7 Formamide 6 127-19-5 N,N-dimethylacetamide 7 872-50-4 N-methylpyrrolidin-2-one 8 26171-83-5 1,2-butanediol 9 504-63-2 1,3-Propanediol 10 26761-45-5 2,3-Epoxypropyl neodecanoate 11 57-55-6 Propylene Glycol 12 108-94-1 Cyclohexanone 13 95-47-6 o-xylene 14 2238-07-5 Diglycidyl ether 15 122-60-1 Phenyl glycidyl ether 16 34590-94-8 Dipropylene glycol monomethyl ether 17 110-54-3 Hexane 18 109-99-9 Tetrahydrofuran 19 75-09-2 Dichloromethane 20 110-82-7 Cyclohexane
1 108-78-1 Melamine 2 37640-57-6 Melamine cyanurate 3 63428-83-1 Polyamide 4 106-50-3 1,4-phenylenediamine 5 9002-89-5 Poly(vinyl alcohol) 6 105-60-2 �µ-caprolactam 7 10578-34-4 Stearyl benzoate 8 108-31-6 Maleic anhydride 9 108-05-4 Vinyl acetate 10 26264-06-2 Calcium dodecylbenzene sulfonate 11 111-69-3 Adiponitrile 12 924-42-5 N-Methylolacrylamide 13 100-20-9 Terephthaloyl Chloride 14 99-63-8 Isophthaloyl Chloride 15 1338-02-9 Copper naphthenate 16 6153-56-6 Oxalic acid dihydrate 17 79-10-7 Acrylic acid 18 75-01-4 Chloroethene 19 25190-06-1 Poly(butylene oxide) macromolecule 20 77-99-6 Trimethylol propane
1 117-81-7 Bis(2-ethylhexyl) phthalate 2 117-84-0 Di-n-octyl phthalate 3 85-69-8 Butyl 2-ethylhylhexyl phthalate 4 84-61-7 Dicyclohexyl phthalate 5 84-74-2 Dibutyl phthalate 6 84-69-5 Diisobutyl phthalate 7 131-11-3 Dimethyl phthalate 8 84-66-2 Diethyl phthalate 9 20548-62-3 Bis(7-methyloctyl) phthalate 10 68515-49-1 Diisodecyl phthalate 11 84-75-3 Di-n-hexyl phthalate 12 6422-86-2 Dioctyl terephthalate 13 137-89-3 Bis(2-ethylhexyl) isophthalate 14 123-79-5 Dioctyl adipate 15 122-62-3 Bis(2-ethylhexyl)sebacate 16 109-43-3 Bis(n-butyl)sebacate 17 512-56-1 Ttrimethyl phosphate 18 126-73-8 Tributyl phosphate 19 8013-07-8 Epoxidized soya bean oil 20 77-93-0 Triethyl citrate
1 27176-87-0 Dodecylbenzenesulphonic acid 2 151-21-3 Sodium dodecyl sulfate 3 9016-45-9 Nonylphenol Ethoxylate 4 63449-41-2 Benzalkonium Chloride 5 139-07-1 Dodecyldimethylbenzylammonium chloride 6 9004-82-4 AES 7 6863-42-9 Coconut oil acid diethanolamine 8 683-10-3 Lauryl betaine 9 25155-30-0 Sodium dodecyl benzene sulfonate 10 107-43-7 Betaine 11 112-00-5 Dodecyltrimethylammonium chloride 12 25496-72-4 Glyceryl monooleate 13 1120-02-1 Octadecy trimethyl ammonium bromide 14 9005-64-5 Polysorbate 20 15 9005-67-8 Tween 60 16 68213-23-0 Fatty alcohol polyglycol ether 17 68585-34-2 Sodium lauryl ether sulfate 18 9004-95-9 Polyethylene Glycol Monocetyl Ether 19 9004-98-2 Polyethylene glycol monooleyl ether 20 9003-11-6 Polyethylene-polypropylene glycol
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
