The product has passed the CE certification and is mainly applied in petroleum, chemical engineering, pharmacy, light textile, military engineering, painting, coal, port, railroad, warehouse, bridge back, etc. for load and unload, pile and move.
1)It adopts double mast and chain driving technology.
2)The controlling system is programmable based on the imported advanced foreign technology.
3)Moving type: electric driving and climbing to a certain gradient.
4)The rising height and load can be changed as required by the customers.
5)There are complete safety equipments and their technical performance has reached the advanced level as the international product.
Smooth travel and lift combine excellent controls to reduces product damages and increases productivity.
Lift limit switch operates at maximum lift height to shut off pump motor.
A heavy-duty 24-volt electrical system provides good travel and lift speeds.
High quality hydraulic pump assures very little noise, maximum efficiency and durability.
Drive units is equipped with an electromagnetic brake that is spring applied and electrically released.
The brake is activated by the control handle position.
The handle is ergonomically designed with a raise, lower and horn button.
Speed automatically reduces when driving with the forks at a height of 12" or higher.
Small turn radius makes it suitable for narrow passage ways.
The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life.
Foot pedal reduces fatigue.
Built-in charger. Technical data
Residual Capacity at different lifting height.
1KG=2.2LB 1INCH=25.4MM
Up to h3 mm
ACTUAL CAPACITY (Q) kg
2500, 1500, 1000
2900, 1000, 700
3400, 800, 500
Load center distance (C)mm
600, 700
With CURTIS electric control from Germany
Equipped with METRLROTA driving wheel and HPI pump unit from Europe.
Heavy duty design with top quality mast construction of HOSCH steel from Germany.
Identification 1.2 Manufacturer's type designation FL1529 FL1534
1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric
1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian
1.5 Load Capacity /rated load Q (t) 1.5
1.6 Load center distance C mm
600
1.8 Load distance, center of drive axle to fork X mm 677
1.9 Wheelbase y mm 1183 1168
Weights 2.1 service Weight Kg 1020 1120
2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375
2.3 Axle loadings, unladen front/rear Kg 755/265 826/295
Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane
3.2 Tyre size, front 250x78
3.3 Tyre size, rear 80x70 1)
3.4 Additional wheels(dimensions) 150x54
3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4
3.6 Track width,front b10(mm) 685
3.7 Track width,rear b11(mm) 390/515
Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235
4.3 Free lift h2(mm) 144 -
4.4 Lift height h3(mm) 2814 3314
4.5 Extended mast height h4(mm) 3430 3905
4.9 Height of tiller in drive position min./max. h14(mm)
985/1365
4.15 Lowered height h13(mm) 86
4.19 Overall length l1(mm) 1940 1925
4.20 Length to face of forks l2(mm) 790 775
4.21 Overall width b1(mm) 805
4.22 Fork dimensions s/e/l(mm) 60/180/1150
4.25 Width over forks b5(mm) 570/695
4.32 Ground clearance, center of wheelbase m2(mm) 50
4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147
4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123
4.35 Turning radius Wa(mm) 1480 1465
Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4
5.2 Lift speed, laden/unladen mm/s 105/170
5.3 Lowering speed, laden/unladen mm/s 100/95
5.8 Max.gradient performance, laden/unladen % 6/12
5.10 Service brake Electromagnetic
E-Motor 6.1 Drive motor rating s2 60min kw 1.2
6.2 Lift motor rating at s3 15% kw 3.0
6.3 Battery acc. To DIN, no 3PZS
6.4 Battery voltage, norminal capacity V/Ah 24/210
Others 8.1 Type of drive control MOSFET Control
8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67
1)Single wheel 80x93
Ws10s-16m cap.1000kgs mono mast electric stacker
1.Price is so low that procurement cost is greatly reduced.
2.Labor-saving: less labor required because of high transportation efficiency.
3.Operation simplified:less effort and high returns can be achieved by our products.
4.Mounted forklift profile steel mast, different with manual&semi ws10s series mast are much stronger and straight when full loading.
5.Liftstar special design supporting leg ensure leg non-deformation for years operation.
6.Driving controller:curtis 1212 controller and can be regulated by curtis hand set easily.
7.Longer handle design:very light and easy turning design which is very comfortable.
8.Low profile mast design:lower height of mast is less than 2000mm/78.5inch suitable for most of doors.
1.Price is so low that procurement cost is greatly reduced.
2.Labor-saving: less labor required because of high transportation efficiency.
3.Operation simplified:less effort and high returns can be achieved by our products.
4.Mounted forklift profile steel mast, different with manual&semi ws10s series mast are much stronger and straight when full loading.
5.Liftstar special design supporting leg ensure leg non-deformation for years operation.
6.Driving controller:curtis 1212 controller and can be regulated by curtis hand set easily.
7.Longer handle design:very light and easy turning design which is very comfortable.
8.Low profile mast design:lower height of mast is less than 2000mm/78inch suitable for most of doors.
China Electric Stacker
Stackers can be roughly divided into three types, manual stackers, semi-electric stackers, and all-electric stackers. The operation of these three types of stackers is basically the same.
The semi-electric stacker is a new type of stacking machine with electric lifting, easy operation, environmental protection and high efficiency. Widely used in overhead cargo, pallet movement and stacking. In the factory, warehouse, logistics center and many other places, the semi-electric pallet stacker is used for unitized pallet stacking, which is safe and efficient; especially in some narrow passages, floors, elevated warehouses and other workplaces, it can fully reflect Out of its superior flexibility, tranquility and environmental performance.
Features:
1. Adopt new rear axle structure to make the stacker structure more reasonable.
2. Imported pneumatic spring type handle device, which is more convenient and reasonable to use.
3. Germany imported raw material forming door frames, which are strictly controlled in terms of quality.
4. Italy imported oil pump, according to customer requirements can replace domestic high quality oil pump.
5. Pedal-type light design, lighter push and pull, more lightweight and flexible, more convenient to use, etc.
About use: The semi-electric stacker generally rises and falls by relying on electric power, and the walking
depends on manual operation, that is, it needs to be pushed and pulled by human power.
Therefore, everyone should open the electric door lock before operation.
When operating, pull the operating lever backwards, that is, the fork
rises. Push the operating lever down, that is, the fork descends. Like many semi-electric stackers, its
operating levers are installed.There is an automatic return spring,which is very convenient to use;after
lifting the goods,the steering handle is used to change the direction. When the job is completed,do not
place the goods on the fork for a long time. In addition, for safety reasons, when the fork is loaded,
remember not to stand on the sides of the fork and the fork.
The operation method of the stacker is basically the same.Everyone should pay attention to the operation
and do not overload or eccentric load.
Semi-electric Stacker
Hydraulic Hand Pallet Truck
Technical Features
Lever-assisted steering, reduce labor intensity, the service time is also increased by 3 times to chain steering.
Low center of gravity, making the stacker more stable during use and reliable.
Over-discharge protection device greatly extended battery life.
The use of imported mast materials, ensures high strength, good stability.
Adjustable forged forks can be lowered to the same height of legs.
Foot brake is simple and easy to maintain.
Setting a explosion-proof valve in the pump
Type: Driving wheel, loading wheel, training wheel.
Material: Polyurethane
Wheel Dia: 0~500mm
Tread Width: 0~200mm
Axle Hole Dia: 0~200mm
Loading Capacity: 0~2000kgs
Unit price: $5.00~$70.00 (exw)
Export port: ningbo, shanghai.
Payment term: TT, LC ect.
We are manufacturer. If there are any questions please do not hesitate to contact me for the further details.
Our zowell standard electric stacker is mainly used for stacking of medium and high intensity, like pallet transport and stack in warehouses, manufacturing industries, retail stores, and so on. It can be operated alone as well as in combination with a platform. And the platform is necessary for long-distance transport.
And the loading capacity of our xe/xeh standard electric stacker ranges from 1000kg to 2000kg.
Features of xe/xeh standard electric stacker:
1. Germany mannstaedt forklift profile for mast building.
2. Swiss brand or italy hydraulic pump.
3. Regenerative braking function
4. Curtis electronic controller
5. Germany frei handle
6. Battery side extraction: the side gate and the battery cover are openable. Battery can be removed from the side, thus making it very convenient to replace and maintain batteries.
7. Emergency reversing device in the handle provides improved operating safety.
8. Emergency power disconnection switch.
9. Braking system, applied with handle upright and horizontal position, help to increase the safety of the truck.
10. Built-in pressure relief valve protects trucks from overloading, thereby increasing the reliability.
11. The mast and frame are dividable and exchangeable
Our zowell sem semi electric stacker is typically designed for stacking of low intensity, and it can be used for pallet transport and stacking in warehouses, manufacturing industry, retail stores, etc. Its loading capacity is from 1000kg to 2000kg.
Features of sem semi electric stacker:
1. Wide-view mast
2. Foot brake
Our zowell xep electric counterbalance stacker is mainly used in stacking of medium and high intensity in warehouses, manufacturing industries, retail stores and so on. Its loading capacity is 1000kg. And it can work well individually or in conjunction with a platform. But its long-distance transport needs a platform.
Features of xep counterbalance electric stacker:
1. Swiss brand or italy hydraulic pump.
2. Regenerative braking function
3. Curtis electronic controller
4. Germany frei handle
5. Battery side extraction: battery can be removed from the side, which makes it very convenient to replace and maintain.
6. Emergency reversing device in the handle improves operation safety.
7. Emergency power disconnection switch.
8. Braking, applied with handle upright and horizontal position, increases its safety degree.
9. Built-in pressure relief valve help to avoid overloading, thereby increasing its reliability.
ATATTACK MH STONE ( HK) CO.,TD. is a professional manufacturer specializing in material handling machinery for more than 10 years. We mainly produce and supply forklifts, electric warehouse trucks, aerial working platform and so on. Now, we have created two brands,"ATTACK" and "ASSISTANT". All of our products comply with international quality standards and are greatly appreciated in a variety of markets throughout the world.For many years, the principle of our company is to provide high quality products with competitive prices, fast delivery, flexible designs, prompt responses and good after sale services.
1. Germany Mannstaedt forklift profile for mast building.
2. SWISS BUCHER brand or ITALY HYDRAPP Hydraulic pump.
3. Regenerative braking function
4. CURTIS electronic controller
5. Germany Frei handle
6. Battery side extraction: The side gate and the battery cover are openable. Battery can be removed from the side, making it very convenient to replace and maintain batteries.
7. Emergency reversing device in the handle provides improved operating safety.
8. Emergency power disconnect switch.
9. Braking applied with handle upright and horizontal position, increasing the safety of the truck.
10. Built-in pressure relief valve protects the trucks from overloads, increases the reliability.
11. The mast and the frame are dividable and exchangeable.
Specially designed for Manual Elecrric Stacker,adopt CMB1 or CMB2 manifold,with the function of power lift and gravity lowering,MV-02 or MV-03 manual release valve control lowering,handle direction can be adjusted according to user needs.The fixed compensated valve maintaining the lowering in steady speed.
Condition:
New
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
Noelift
Model Number:
TD
Type:
Powered Pallet Truck
Power Souce
AC Motor
Rated Loading Capacity:
1500k
Max. Lifting Height:
7200mm
Min. Lifting Height:
3000mm
Fork Length:
850m
Fork Width:
100mm
Overall Dimensions:
2450mmx1830mmx2104mm
Certification:
CE,GOST, ISO9001
After-sales Service Provided:
Overseas third-party support available
electric side loading truck tyres:
polyurethane solid tyres
electric side loading truck color:
red
electric side loading truck type:
standing operating
electric side loading truck highest mast:
7200mm
electric side loading truck brake:
electrical braking
electric side loading truck battery:
48/300 V/Ah
electric side loading truck controller:
US Curtis
Packaging & Delivery
Packaging Details: International packing way, packed with thick plastic film for side load forklift truck
Delivery Detail: Shipped in 30 days after payment
Product Description
ELECTRIC SIDE LOADING REACH TRUCK FEATURES
1. Optional capacity: 1.5tons, 2tons. Optional lift height: 3000-7200mm.
2. Environment-Friendly:
Low noise and non-pollution electricity enegy adopted ensure Noelift electric side loading reach truck Environment-Friendly.
3. Cost-Saving:
Brushless AC driving motor, side-pull battery, ensure 30% energy saving, lower maintenance cost. American imported CURTIS controller, quick reaction, strong ability of accerleration and deceleration control, ensure equipment longer service life.
4. Realibility:
4.1: Side move forward, equipment forks facing racks save the operation space. Special body design suitable for carrying long materials, such as long steel tube, wood, aluminium and so on.
4.2: Reach cylinder which make use of vertical design, will be more steady when operating.
4.3: Side-pull design battery, convenient for replacement, maintenance, improve efficiency.
5. Strict Quality Inspection System:
Condition:
New
Place of origin:
Zhejiang, china (mainland)
Brand name:
Noelift
Model number:
Ta10-20
Type:
Powered pallet truck
Power souce:
Dc motor
Rated loading capacity:
1000kgs-2000kgs
Max. Lifting height:
3000mm
Min. Lifting height:
1600mm
Fork length:
1000mm
Fork width:
160mm
Overall dimensions:
1585mm*760mm*2060mm
Certification:
Ce, iso9000, gost
After-sales service provided:
Overseas third-party support available
Semi electric stacker color:
Red or yellow
Semi electric stacker type:
Standing operate
Semi electric stacker brake:
Electric brake system
Packaging & delivery
Packaging details:International packing way, packed with thick plastic film.
Delivery detail:15days after advance payment
Product description
1-2ton semi-electric stacker economic cheaper
10days delivery after advance payment
With eps steering system, easier operater
Semi-electric stacker, ta series steering wheel pallet stacker, rated load capacity: 1000kg, 1500kg, 2000kg, lift height: 3500mm, used for single face pallet;
1. With eps steering system, easier to operation;
2. Electronic trpe braking;
3. To use intelligent charger, auto analysis the residual energy and optimizing the charging process, without manual operation and extend the battery working life effectivly;
4. Speed limited for high position, to aviod the possibility of products' overturning when high speed in high position;
5. High strength overhead guard to protect the operator
Our xek electric straddle stacker is especially used for stacking of medium and high intensity in warehouses, manufacturing industries, retail stores and that. Its loading capacity ranges from 1000kg to 2000kg. This kind of stacker can be used independently as well as together with a platform. But the platform is necessary for its long-distance transport.
Features of xek electric straddle stacker:
1. Germany mannstaedt forklift profile for mast building.
2. Swiss brand or italy hydraulic pump.
3. Regenerative braking function
4. Curtis electronic controller
5. Germany frei handle
6. Battery side extraction: the side gate and the battery cover are openable. Battery can be removed from the side, making it very convenient to replace and maintain batteries.
7. Emergency reversing device in the handle improves operation safety.
8. Emergency power disconnection switch.
9. Braking applied with handle upright and horizontal position, increasing the safety of the truck.
10. Built-in pressure relief valve protects this electric straddle stacker from overloading, thereby increasing its reliability.
11. The mast and frame are dividable and exchangeable.
1-2 ton electric stacker esd10-20
1. Load capacity: 1000-2000kg
2. Ac power traveling & lifting motor
3. Warranty: 1 year.
Characteristics:
1.Emergency reversing device.
2.Built-in pressure relief valve protects the trucks from overloads.
3.Emergency power disconnect.
4.Low speed switch in the handle.
5.Stepless speed control.
6.The rubber platform and safety guides increase operator safety and reduce fatigue, and they can be folded away when not in use
8 units in one 20ft container export standard package; full set documents including spare parts list, operate maintenance manual and engine operate manual; one set of inspeciton certificate issued by manufacturer; one set of common use tools; all above mentioned will be put in tool box.
201938 Electric Stacker Suppliers
Short on time? Let Electric Stacker sellers contact you.
