The product has passed the CE certification and is mainly applied in petroleum, chemical engineering, pharmacy, light textile, military engineering, painting, coal, port, railroad, warehouse, bridge back, etc. for load and unload, pile and move.
1)It adopts double mast and chain driving technology.
2)The controlling system is programmable based on the imported advanced foreign technology.
3)Moving type: electric driving and climbing to a certain gradient.
4)The rising height and load can be changed as required by the customers.
5)There are complete safety equipments and their technical performance has reached the advanced level as the international product.
Smooth travel and lift combine excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. High quality hydraulic pump assures very little noise, maximum efficiency and durability. Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonomically designed with a raise, lower and horn button. Speed automatically reduces when driving with the forks at a height of 12" or higher. Small turn radius makes it suitable for narrow passage ways. The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life. Foot pedal reduces fatigue. Built-in charger. Technical data Residual Capacity at different lifting height. 1KG=2.2LB 1INCH=25.4MM Up to h3 mm ACTUAL CAPACITY (Q) kg 2500, 1500, 1000 2900, 1000, 700 3400, 800, 500 Load center distance (C)mm 600, 700 With CURTIS electric control from Germany Equipped with METRLROTA driving wheel and HPI pump unit from Europe. Heavy duty design with top quality mast construction of HOSCH steel from Germany. Identification 1.2 Manufacturer's type designation FL1529 FL1534 1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric 1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian 1.5 Load Capacity /rated load Q (t) 1.5 1.6 Load center distance C mm 600 1.8 Load distance, center of drive axle to fork X mm 677 1.9 Wheelbase y mm 1183 1168 Weights 2.1 service Weight Kg 1020 1120 2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375 2.3 Axle loadings, unladen front/rear Kg 755/265 826/295 Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane 3.2 Tyre size, front 250x78 3.3 Tyre size, rear 80x70 1) 3.4 Additional wheels(dimensions) 150x54 3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4 3.6 Track width,front b10(mm) 685 3.7 Track width,rear b11(mm) 390/515 Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465 Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4 5.2 Lift speed, laden/unladen mm/s 105/170 5.3 Lowering speed, laden/unladen mm/s 100/95 5.8 Max.gradient performance, laden/unladen % 6/12 5.10 Service brake Electromagnetic E-Motor 6.1 Drive motor rating s2 60min kw 1.2 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. To DIN, no 3PZS 6.4 Battery voltage, norminal capacity V/Ah 24/210 Others 8.1 Type of drive control MOSFET Control 8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67 1)Single wheel 80x93 .2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465.
Technical data : 1KG=2.2LB 1INCH=25.4MM Model No. SEN1520, SEN1525, SEN1530, SEN1535, SEN2020 Rated Capacity kg 1500, 2000 Load Center mm 400 Max. Fork Height 2000, 2500, 3000, 3500, 2000 Max. Machine Height 2560, 3060, 3560, 4060, 2560, Fork Length 1000 Fork Width 300-850 Min. Turning Radius 1350, 1450, 1350 Wheel Base 1185 Front-Wheel Distance 316 Lifting Motor v/kw 12/1.5-1.6 Aneroid Battery v/Ah 12/120-150 Charger v/A 12/15 Overall Length mm 1660 Overall Width 865, 930 Overall Height 1580, 1830, 2080, 2330, 1580 Overall Net Weight kg 448, 470, 492, 515.
China Electric Stacker Stackers can be roughly divided into three types, manual stackers, semi-electric stackers, and all-electric stackers. The operation of these three types of stackers is basically the same. The semi-electric stacker is a new type of stacking machine with electric lifting, easy operation, environmental protection and high efficiency. Widely used in overhead cargo, pallet movement and stacking. In the factory, warehouse, logistics center and many other places, the semi-electric pallet stacker is used for unitized pallet stacking, which is safe and efficient; especially in some narrow passages, floors, elevated warehouses and other workplaces, it can fully reflect Out of its superior flexibility, tranquility and environmental performance. Features: 1. Adopt new rear axle structure to make the stacker structure more reasonable. 2. Imported pneumatic spring type handle device, which is more convenient and reasonable to use. 3. Germany imported raw material forming door frames, which are strictly controlled in terms of quality. 4. Italy imported oil pump, according to customer requirements can replace domestic high quality oil pump. 5. Pedal-type light design, lighter push and pull, more lightweight and flexible, more convenient to use, etc. About use: The semi-electric stacker generally rises and falls by relying on electric power, and the walking depends on manual operation, that is, it needs to be pushed and pulled by human power. Therefore, everyone should open the electric door lock before operation. When operating, pull the operating lever backwards, that is, the fork rises. Push the operating lever down, that is, the fork descends. Like many semi-electric stackers, its operating levers are installed.There is an automatic return spring,which is very convenient to use;after lifting the goods,the steering handle is used to change the direction. When the job is completed,do not place the goods on the fork for a long time. In addition, for safety reasons, when the fork is loaded, remember not to stand on the sides of the fork and the fork. The operation method of the stacker is basically the same.Everyone should pay attention to the operation and do not overload or eccentric load.
Semi-electric Stacker Hydraulic Hand Pallet Truck Technical Features Lever-assisted steering, reduce labor intensity, the service time is also increased by 3 times to chain steering. Low center of gravity, making the stacker more stable during use and reliable. Over-discharge protection device greatly extended battery life. The use of imported mast materials, ensures high strength, good stability. Adjustable forged forks can be lowered to the same height of legs. Foot brake is simple and easy to maintain. Setting a explosion-proof valve in the pump
Our zowell standard electric stacker is mainly used for stacking of medium and high intensity, like pallet transport and stack in warehouses, manufacturing industries, retail stores, and so on. It can be operated alone as well as in combination with a platform. And the platform is necessary for long-distance transport. And the loading capacity of our xe/xeh standard electric stacker ranges from 1000kg to 2000kg. Features of xe/xeh standard electric stacker: 1. Germany mannstaedt forklift profile for mast building. 2. Swiss brand or italy hydraulic pump. 3. Regenerative braking function 4. Curtis electronic controller 5. Germany frei handle 6. Battery side extraction: the side gate and the battery cover are openable. Battery can be removed from the side, thus making it very convenient to replace and maintain batteries. 7. Emergency reversing device in the handle provides improved operating safety. 8. Emergency power disconnection switch. 9. Braking system, applied with handle upright and horizontal position, help to increase the safety of the truck. 10. Built-in pressure relief valve protects trucks from overloading, thereby increasing the reliability. 11. The mast and frame are dividable and exchangeable .
Our zowell sem semi electric stacker is typically designed for stacking of low intensity, and it can be used for pallet transport and stacking in warehouses, manufacturing industry, retail stores, etc. Its loading capacity is from 1000kg to 2000kg. Features of sem semi electric stacker: 1. Wide-view mast 2. Foot brake
Our zowell xep electric counterbalance stacker is mainly used in stacking of medium and high intensity in warehouses, manufacturing industries, retail stores and so on. Its loading capacity is 1000kg. And it can work well individually or in conjunction with a platform. But its long-distance transport needs a platform. Features of xep counterbalance electric stacker: 1. Swiss brand or italy hydraulic pump. 2. Regenerative braking function 3. Curtis electronic controller 4. Germany frei handle 5. Battery side extraction: battery can be removed from the side, which makes it very convenient to replace and maintain. 6. Emergency reversing device in the handle improves operation safety. 7. Emergency power disconnection switch. 8. Braking, applied with handle upright and horizontal position, increases its safety degree. 9. Built-in pressure relief valve help to avoid overloading, thereby increasing its reliability.
ATATTACK MH STONE ( HK) CO.,TD. is a professional manufacturer specializing in material handling machinery for more than 10 years. We mainly produce and supply forklifts, electric warehouse trucks, aerial working platform and so on. Now, we have created two brands,"ATTACK" and "ASSISTANT". All of our products comply with international quality standards and are greatly appreciated in a variety of markets throughout the world.For many years, the principle of our company is to provide high quality products with competitive prices, fast delivery, flexible designs, prompt responses and good after sale services.
1. Germany Mannstaedt forklift profile for mast building. 2. SWISS BUCHER brand or ITALY HYDRAPP Hydraulic pump. 3. Regenerative braking function 4. CURTIS electronic controller 5. Germany Frei handle 6. Battery side extraction: The side gate and the battery cover are openable. Battery can be removed from the side, making it very convenient to replace and maintain batteries. 7. Emergency reversing device in the handle provides improved operating safety. 8. Emergency power disconnect switch. 9. Braking applied with handle upright and horizontal position, increasing the safety of the truck. 10. Built-in pressure relief valve protects the trucks from overloads, increases the reliability. 11. The mast and the frame are dividable and exchangeable.
