Description: The desander with underflow shaker is also called Mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size mud cleaner, the Mini Desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, Mini desander is an Ideal choice.
Environmental machinery Desander rmt250 Desander rmt200 Desander rmt150 Desander rmt100a Desander rmt500 Application: Rmt,eries desander is mainly used in modern foundation construction. Such as wall stabilizing, drilling and any other construction using. It has several advantages: 1reuse of the slurry, thus save the material of making slurry, reduce the cost. 2decease the environment pollution as the design of the desanderby closed cycle and lower water content in the waste. 3improve the efficiency of drilling hole. 4enhance the quality of hole by full purification of the sewage. Main feature 1the vibrating sc reen is easy to ope rate, install and maintain. 2advanced straight type make good effect of dewatering. 3efficiency of the vibrating screen is high, can be applied to drilling in varies geologies. 4voice of the vibrating screen is very low, good for the environment.?? 5energy saving due to high power and low power consumption. 6the vibrating force, screen angle and screen size are adjustable. 7special recoil device can stop the block in the slurry tank, so can make sure to normal operation of the desander. 8advanced structure of corrosion resistance slurry pump can be standard used and maintain easily, thick grinding parts and bracket is suitable to transport. 9the hydrocyclone of the desanderis in good performance of separating. At the same time, the material is abrasion and corrosion resistance, so it can work in bad condition for long time without maintenance. 10our innovate liquid balance device can not only keep the stability of the storage tank level, but also can realize the recycling use of the slurry.
Brief introduction LZ patent desanding plant is designed on the base of absorbing world advanced technology and combining with the domestic applications of the desander. it is popular for Bored Pile Slurry desanding plant, Mud recycling,TBM slurry treatment, HDD (trenchless) as well as water well drilling etc. Technology Advantages 1.Reduce the fine sand losing. 2.Stable vibration, long serving life and easy maintenance. 3.Fines 0.16-3mm brings good profits. 4.Unique in market, LZ patent product.
Polyurethane Hydrocyclone Desander Cone Product Description Polyurethane, rubber, ceramic cyclone is widely used in oil drilling, nonferrous, ferrous and nonmetallic concentrator hierarchical classIfication work in process and many other links, used for desliming, dehydration of slurry materials, oil desanding and desilting device; Mining classification, tailings DAMS; The coal slime water processing and one of the important equipment such as recycling of slime. Hydro cyclones are used in variety of industrial and environmental applications to successfully separate solids from liquids. It is a common fractionation equipment. Its main role is to grade and concentration. Achieve grade and mud off a variety of materials. Features of desander cone: 1. Hydro Cyclone filter is a kind of equipment for classifying the ore pulp by using centrifugal force. 2. Hydro Cyclone filter has no motion and dynamic parts, but requires matching with corresponding slurry pump. 3. Hydro Cyclone filter is based on fluid solid particles in the desander in screening principle when rotating in cycloneand filter made, as a whole, in the field of water treatment to achieve sand removal, and descending the turbid,solid-liquid separation effect is remarkable. 4.Suitable for dry fine powder classifying,powders of ball shape ,flake shape and needle shape,also powders with different densities. 5.Product size from classifier can vary from D97:2 micron to 150 micron.The product size is adjustable,which makes the change of product size easy and simple. 6.Classifying efficiency(extraction rate) can be between 60% and 90%.Material with good flow-ability would have high classifying efficiency,otherwise,the classifying efficiency would be low. 7.Vertical classifier wheel would have low ratation speed,low wear and low motor power. Advantage of desander cone: 1.save floor space; 2.low construction expense; 3.Large processing capacity; 4.Stable Performance; 5.Low maintenance charge; 6.easy to attach and detach; 7.The classification particle size can reach 10μm. Structure of desander cone: Hydro cyclone filter consists of feed, outlet and inlet. hydro cyclone filter has one inlet that makes sure mud enters the cone along tangent direction. hydro cyclone filter has two outlets: the smaller at the bottom called underflow outlet or discharge outlet which denser or larger particles pass by, and the larger on the top called overflow outlet which lighter or finer mud pass by. The small inlet, outlet and small diameter needs high pressure while processing little capacity. On the contrary, the big inlet, outlet and big diameter needs low pressure while processing large capacity.
Name: Desander Hydrocyclone Size: FX300 Material: inner polyurethane, outside is steel Connection: flange and clamp Separation size: 47-76 micron meters Application: Spare part for desander, mud cleaner, hydrocyclone group etc Field: drilling fluid, waste water Treating capacity: 60m3/h each piece
system, for which the solids diameter to separate ranges from 45 to 75 microns. kosun is a leader in china¡¡¥s solids control industry and expert in drilling waste management. Kosun is
Oilfield Drilling Equipment Oilfield Solids Control Equipment PRODUCT� DESCRIPTION the second equipment in solids control system it is used to separate solid phase particles whose diameter is 40 75 m. Select Special wear-resistant polyurethane material hydrocyclones. Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes. Symmetrical feeding design can make the liquid distribution to be more reasonable and stable. Size of the underflow hole of the hydrocyclone can be adjusted in order to control the handling capacity of the equipment. Different specifications and quantities of hydrocyclones can be matched according to the handling capacity that customer required.
The desander with underflow shaker is also called mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size desander and desilter assembly, the mini desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, mini desilter is an ideal choice. Features: (1). Desilter options with shaker and without shaker for flexible application. (2). Desilter cones with PU material with better abrasion resistance. (3). No under shaker design structure compact and assembly flexible. (4). Mini desilter cleaner with shaker for both weighted / unweighted mud in various drilling.
The basic principle of the hydrocyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the cone down along the wall along the wall, and from the bottom outlet, thus forming The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the center of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation. Polyurethane characteristics: 1. The hardness range is wide, and the elongation and elasticity of the rubber are still under high hardness. The hardness range of polyurethane board is Shao A10-D80. 2. High strength. In rubber hardness under their tensile strength, tear strength and bearing capacity rubber is much higher than general. Under the high hardness the impact strength and flexural strength and is much higher than that of plastic. 3. Wear resistance. The wear resistance is very good, about 3-5 times of the rubber. 4. Oil resistance. Polyurethane board is a strong polar polymer, and the affinity of non polar mineral oil, in fuel oil and mechanical oil is almost no corrosion. 5. Good resistance to oxygen and ozone. 6. Excellent absorption performance, can be used to reduce the vibration, buffer effect. In the mold manufacturing industry, alternative rubber and spring. 7. It has good low temperature performance. 8. Radiation resistance, high energy - ray properties of the polyurethane, the use of the 10-10 radiation dose is still satisfactory. 9. Have good mechanical processing performance. (car, milling, grinding, drilling can be) Application: widely used in machinery, transportation, oil, mining, construction, textile, sports and other fields. The company to undertake a variety of specifications of the size of polyurethane products custom processing.
CSQ Desander separator is 2nd phase mud process equipment in solids control system. The cones size and number can be adjusted according to client's actual capacity requirements. Cones also can be cast iron or other materials. The bottom shaker can be configured or not. We also can design desander with large bottom shale shaker, such as AJS703L, AJS603L etc.CSQ seriesHydrocyclone desander is 2nd solids control equipment. OGEM desander is widely used in oil and gas drilling, HDD, slurry separation, etc. Industry Benefits Provide better effect for subsequent process Provides durable and low cost replacement Save much space and provide easy handling More flexible, user-friendly and proper cost Better to protect equipment when handle and transport
Desander is an important part of the drilling fluid solid control equipment, mainly used to remove finer solid particles in the drilling fluid screened by the shale shaker. It using the principle of centrifugal sedimentation,the suspended particles can be separated and removed from the liquid after being accelerated by the centrifugal acceleration, so that the solid phase content in the drilling fluid can be effectively controlled, and obtain high-quality drilling fluid with excellent Technological properties with reasonable particle distribution, to meet drilling operations requirements.
Two side screen tensioning-More reliable Various screen type-Flexible High G vibration motor-High efficiency Linear motion-Rapid discharges Mechanical deck angle adjustment-Easy and convenient Polymeric material cones-Durable Customizable configuration. Package:iorn box.
Mud Cleaner or Desander and Desilter is the second class and the third phase solids control equipment, and combine desander cleaner, desilter cleaner and underset shale shaker as one complete equipment, compressed structure, small size and powerful function, it is the ideal choice of second and third phase solids control equipments.Mud Cleaner is also called Desander and Desilter. Brightway Solids is the professional Mud Cleaner or Desander and Desilter manufacturer and supplier in China and can design and product BWNJ series Mud Cleaner as clients request. Brightway Solids Mud Cleaner Model BWZJ104-2S12N Mud Cleaner Capacity: 240m3/h1056GPM) BWZJ103-2S12N Mud Cleaner Capacity: 240m3/h1056GPM) BWZJ70-2S12N Mud Cleaner Capacity: 240m3/h1056GPM) BWZJ85-2S12N Mud Cleaner Capacity: 240m3/h1056GPM) Mud Cleaner Features 1. Adopt ANSNY limited elment analysis, optimize structure. 2. Heat treatment on complete deck, grinding sand, pickling phosphating and hot dip galvanizing 3. Adopt SS304 or Q345 high-strength alloy material. 4. Vibration motor is form Italy OLI. 5. Electrinic control system if from Huarong brand or Helong brand explosion-proof elctronic switch. 6. High strength compound rubber material used to reduce shock 7. Cone adopt high wearing-resisting polyurethane and High copy Derrick structure 8. Inlet and outlet adopt fast joint connection Plastic Package,Wooden Box, or according to the customer request.
Shale shaker, desilter, desander, mud cleaner, centrifugal pump.
Model: shale shaker QZS703 Vibration force: 76kn Capacity(m3/h, gpm):90/396 Screen meshes:40-200meshes. Weight:1960kgs Dimension:2580x1840x1640mm.
Application Tr series shale shaker is the first solid control equipment in the whole control system. It separates the large amount of solid particles in the drilling fluid from the well as to enter the second stage separating equipment. This shaker can be used independently and also can operate with two or three shakers. Tr also provides the divided-flow manifold. Features: 1. Two side tensioning or block tighting screen-more reliable 2. Various screens type-flexible 3. High g vibration motor-high efficiency 4. Linear motion-rapid discharges 5. Mechanical deck angle adjustment-easy and convenient Benefits 1. Compact footprint and light 2. User-friendly 3. Easy to installation 4. Low cost on operation and maintenance. 5. Low noise 6. Decrease drilling cost Tr shaker is linear motion. This model shale shaker is high efficiency, reduces mud losses via a dry solids discharge. The shaker screen area can up to 2.94m2. Please come to tr to get more information on tr shaker and shaker screen. Wooden package for maritime transport as per the equipment size.
Shale shaker, desander, desilter, vacuum degasser, decanter centrifuge, vertical cutting dryer.
Mud purification system, drilling fluid vibrating screen, mud cleaner, desander, desilter, vacuum degasser, centrifuge.
Solid Control Equipment, Shale Shaker, Desander, Desilter, Mud Cleaner, Decanter Centrifuge, Centrifugal Pump, Mud Tank, Mud Agitator, Mud Gun.
Three phase separator, X-MAS trees, wellhead desander, choke manifold, steam generator, heat exchanger, buffer tank, CNG tank.
