Desilter Drilling Mud Desander

Oilfield Drilling Equipment Oilfield Solids Control Equipment PRODUCT� DESCRIPTION the second equipment in solids control system it is used to separate solid phase particles whose diameter is 40 75 m. Select Special wear-resistant polyurethane material hydrocyclones. Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes. Symmetrical feeding design can make the liquid distribution to be more reasonable and stable. Size of the underflow hole of the hydrocyclone can be adjusted in order to control the handling capacity of the equipment. Different specifications and quantities of hydrocyclones can be matched according to the handling capacity that customer required.

CNQ Cyclone Desilter is a two-level, three-level solid control system to treat the drilling fluid. According to the diameters of cyclone, there are cyclone desander and cyclone desilter. Generally, less than 8? (4? and 5?) cyclone combination is called as "desilter" which is mainly applied to separate the solid particles (15-47µm) in the drilling fluid. According to customer's requirement of throughput, combine various cyclones into the desilter. The cyclone desilter is widely applied to cyclone desilting separation in petroleum drilling, horizontal directional drilling, sewage treatment, etc. Features 1.Sand size solids removal (12~47 microns) 2.Polymeric cones 3.Lightweight, compact 4.Customized cone configuration specific to customer needs 5.S.S Clamp and flange type optional 6.Lifting eye welded to frame Benefits 1.Better effect for subsequent process 2.Durable and low cost replacement 3.Save much space and provide easy handling 4.More flexible, user-friendly and proper cost 5.Provide easy control on treating capacity 6.Give user convenience on cones installation, etc. 7.Better to protect equipment when handle and transport

CSQ Desander separator is 2nd phase mud process equipment in solids control system. The cones size and number can be adjusted according to client's actual capacity requirements. Cones also can be cast iron or other materials. The bottom shaker can be configured or not. We also can design desander with large bottom shale shaker, such as AJS703L, AJS603L etc.CSQ seriesHydrocyclone desander is 2nd solids control equipment. OGEM desander is widely used in oil and gas drilling, HDD, slurry separation, etc. Industry Benefits Provide better effect for subsequent process Provides durable and low cost replacement Save much space and provide easy handling More flexible, user-friendly and proper cost Better to protect equipment when handle and transport

The basic principle of the hydro cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the force down along the wall along the wall, and from the bottom outlet, thus forming. The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the central of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.

Mud agitator/mud mixer 1. As a dedicated equipment for the standard circulating tank of drilling liquid, it has high transmission efficiency, great transmission power, and strong mixing capability due to the use of circular gear and cylindrical worm for single stage transmission in reducer box, which is provided with blower. 2. Small in volume and light in weight, the reducer box produces low noise but achieves longer service life. Due to its simple construction reliable performance, and easy maintenance, it is suitable to work in the field under harsh conditions. 3. In novel design, the upper and lower mixing wheels have great mixing capability, with its vibration spreading to a larger range, but requiring a reduced start-up torque. 4. The worm and worm gear, and the bearing are lubricated by spray in oil tank; the bearing at the output end of the shaft is lubricated with grease; the lubrication tank for the worm, worm gear, and bearing is separate from the bearing at the output shaft, thus avoiding leakage at the output shaft due to worn-out seal. 5. Motor is placed on level, so it's easy to install, adjust, and replace. Standard seaworthy wooden packing

1. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 2. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly

Mud Cleaning Equipment Factory Description Of Drilling Mud Mixer Jet mud mixer is a specialized solids control equipment used for configuring and aggravating drilling fluid , thus change the density , viscosity and pH of drilling fluid. DC uses venturi tube combined with original jet nozzle created a new design of jet mud devices, not only simple in structure, but also have strong feasibility, which can meet the aggravation and configuration of drilling fluid in drilling solid control system from 1500m to 9000m. We can also produce double jet mud mixers according to customers' requirements. Jet mud mixers produced by DC have the advantages of high mixing speed, safe and reliable performance, long service life and ect.

API Drilling Chinese Downhole Drilling Mud Motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc.

1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 3. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools