Cwdm Sfp Transceiver Suppliers and Manufacturers

CWDM SFP Transceiver The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. It is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1, also with Fiber Channel per FC-PI-2 Rev. 10.0. Also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3Z. Product Features Form type: SFP Data rate: 155Mbps, 1.25Gbps, 2.488Gbps, 4.25Gbps Transmission Distance: 40KM, 80KM, 120KM Wavelength: CWDM Wavelength Cable type: SMF Interface: Duplex LC/UPC DDM Support: Yes Operating temperature: Commercial: 0°C to +70°C Voltage: 3.3V Industrial: -40°C to +85°C Regulatory Compliance: CE,FCC,ROHS COMPLIANT, SFP MSA and IEEE802.3Z Applications ��Switch to Switch Interface ��Fast Ethernet ��Switched Backplane Applications ��Router/Server Interface ��Other Optical Links Ordering Information Part Number Data rate Transmission Distance Center Wavelength Average Output Power (dBm) Receiver Sensitivity (dBm) SFP-Cxx03-12 155Mbps 80KM CWDM DFB 0 ~ 5 �-34, PIN SFP-CXX03-15 155Mbps 120KM CWDM DFB 1 ~ 5 �-37, APD SFP-CXX24-L4 1.25Gbps 40KM CWDM DFB - 5 ~ 0 �-23, PIN SFP-CXX24-L8 1.25Gbps 80KM CWDM DFB 0 ~ 5 �-23, PIN SFP-CXX24-12 1.25Gbps 120KM CWDM DFB 0 ~ 5 �-31, APD SFP-CXX48-L4 2.488Gbps 40KM CWDM DFB -5 ~ 2 �-18, PIN SFP-CXX48-L8 2.488Gbps 80KM CWDM DFB 0 ~ 5 �-28, APD SFP-CXX4G-L4 4.25Gbps 40KM CWDM DFB -5 ~ 2 �-18, PIN SFP-CXX4G-L8 4.25Gbps 80KM CWDM DFB 0 ~ 5 �-28, APD

10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.

100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support

SFP-CWDM Fiber-optic Transceiver SFP-CWDM-xx SFP Fiber-optic Transceiver with Up to 155M/1.25Gbps Data Rate 1470/1490/1510/1530/1550/1570/1590/1610nm Wavelength(DFB laser) Reach to 40km/80km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper. 1) Weight:0.02KG/PIECE; 2) Dimensions:60*12*11mm.

Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC

Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC

Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC

2.5g cwdm sfp 1470-1610nm lc 80km fiber optic transceiver We supply brand-new fiber optic transceivers 100% compatible with most switches like cisco, 3com, hp, foundry, nortel, d-link, extreme, juniper, finisar, etc, and have got the iso9001-2000, ul, tuv, ce, fda, fcc, rohs and reach certificates to ensure the quality of products. Please contact us to get detail data sheet. Cwdm sfp, cwdm sff, cwdm 1x9, cwdm gbic Multirate sfp, multi-rate wdm sfp 10g pon Gpon sfp, onu sff, onu sfp, onu sfp Gepon sfp, onu sff, onu sfp, onu sfp 3g/hd sdi video sfp, sd sdi video sfp Gbic, wdm gbic 1x9, sff 2x5, sff 2x10 modules Tosa, rosa, bosa Rj transceivers Transceivers with any level of customization Export carton packing

Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet

1.25g cwdm-sfp-1490 optical transceiver. Dualfiber singlemode 1490nm 80km Features Dual data-rate of 1.25gbps operation 1490nm cwdm dfb laser and pin photodetector for 80km transmission Compliant with sfp msa and cwdm-sfp-1490 with duplex lc receptacle Digital diagnostic monitoring: Internal calibration or external calibration Compatible with rohs +3.3v single power supply Operating case temperature: Standard : 0 to +70+¼pc Industrial : -40 to +85+¼pc Applications Gigabit ethernet Fiber channel Switch to switch interface Switched backplane applications Outer/server interface Other optical transmission systems Description The sfp transceivers are high performance, cost effective modules supporting dual data-rate of 1.25gbps and 80km transmission distance with smf. The transceiver consists of three sections: a cwdm dfb laser transmitter, a pin photodiode integrated with a trans-impedance preamplifier (tia) and mcu control unit. All modules satisfy class i laser safety requirements. The transceivers are compatible with sfp single-source agreement (msa) . Information, please refer to sfp msa.

10G SFP+ CWDM 60km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module

With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here. AP-SC49125-3CxL80 1.25 Gb/s RoHS Compliant CWDM Pluggable SFP Transceiver Product features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Uncooled DFB laser transmitter in 8 possible CWDM wavelengths Duplex LC connector RoHS compliant and Lead Free Up to 80 km on 9/125 Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation

1) Package:SFP+; 2) Data Rate:10Gbps; 3) Distance:300m; 4) Wavelength:850nm; 5) Connector:Duplex LC; 6) Fiber Type:Multi-mode fiber(MMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:0 to 70; 9) DDM: With Digital Diagnostic Monitor; 10) Others:Compliant with 10GBASE-SR standards,SFP+ MSA specification and IEEE 802.3AE. 11) Application:10GBASE-SR/SW,10G Ethernet.

1) Package: SFP; 2) Data Rate:1.25Gbps; 3) Distance: 550m; 4) Wavelength: 850nm; 5) Connector: Duplex LC; 6) Fiber Type: Multi-mode fiber(MMF); 7) Power Supply: 3.3 single power supply; 8) Operating temperature: -40 to 85 9) Certification: CE,FCC,ROHS; 10) Others: Compliant SFP MSA specification and SFF-8472,IEEE802.3Z. 11) Application:1000BASE-SR/SW,1.25G Ethernet.

1) Package:SFP; 2) Data Rate:1.25Gbps; 3) Distance:10km; 4) Wavelength:1310nm; 5) Connector:Duplex LC; 6) Fiber Type:Single-mode fiber(SMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:-40 to 85 9) Certification: CE,FCC,ROHS; 10) Others:Compliant SFP MSA specification and SFF-8472. 11) Application:1.25Gbps 1000BASE-LX,1.06Gbps Fiber Channel.

NETON SFP Transceiver Module with Single LC Receptacle Transmitter center wavelength: 1310nm, 1550nm Data rate: 155Mbps to 1.25Gbps QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc Power supply: single 3.3V Distance: SR, IR1, IR2, LR1, LR2 Operating temperature: 0C to 70C or -40C to 85C. NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle: 1.Transmitter center wavelength: 1310nm, 1550nm 2.Data rate from 155Mbps to 1.25Gbps 3.Single 3.3V power supply 4.Single LC receptacle 5.Distance SR, IR1, IR2, LR1, LR2 6.Monitoring interface compatible with SFF-8472 7.Operating temperature 0C to +70C or -40C to +85C Applications of NETON SFP Bi-Di Transceiver Module with Single LC Receptacle: 1.Ethernet 2.Fiber Channel 3.ATM 4.SONET OC-3/SDH STM-1 5.Switches 6.Routers 7.Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.

NETON SFP Bi-Di Transceiver Module with Single SC Receptacle Transmitter center wavelength: 1310nm, 1550nm Data rate: 155Mbps to 1.25Gbps QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc Power supply: single 3.3V Distance: SR, IR1, IR2, LR1, LR2 Operating temperature: 0C to 70C or -40C to 85C. NETON optic products, 1x9 Transceiver Module, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Transmitter center wavelength: 1310nm, 1550nm 2.Data rate from 155Mbps to 1.25Gbps 3.Single 3.3V power supply 4.Single SC receptacle 5.Distance SR, IR1, IR2, LR1, LR2 6.Monitoring interface compatible with SFF-8472 7.Operating temperature 0C to +70C or -40C to +85C. Applications of SFP Bi-Di Transceiver Module with Single SC Receptacle: 1.Ethernet 2.Fiber Channel 3.ATM 4.SONET OC-3/SDH STM-1 5.Switches 6.Routers 7.Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.

Standard and custom compatible SFP, BIDI SFP, SFP+, XFP, X2 CWDM transceivers.

X2 10G Fiber-optic Transceiver X2-10GB-SR/LR X2 Fiber-optic Transceiver with Up to 10GB Data Rate 850nm/1310nm Wavelength(DFB laser) Reach to 85m/10km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.

CWDM-SFP