Atop Technology Co., Ltd

With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km). Details about one modle of atop's sfp transceiver here. Ap-s31121-3cl20 1.25 gb/s rohs compliant long-wavelength Pluggable sfp transceiver Product features Upto 1.25gb/s duplex data links Hot-pluggable sfp footprint 1310nm fabry-perot laser transmitter Duplex lc connector Rohs compliant and lead free Upto 20 km on 9/125 Metal enclosure for lower emi Single 3.3v power supply Low power dissipation

With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here. AP-SC49125-3CxL80 1.25 Gb/s RoHS Compliant CWDM Pluggable SFP Transceiver Product features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Uncooled DFB laser transmitter in 8 possible CWDM wavelengths Duplex LC connector RoHS compliant and Lead Free Up to 80 km on 9/125 Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation

Product features Hot-pluagable gbic footprint Extended case temperature range (0ípc to +85ípc ) Fully metallic enclosure for low emi Low power dissipation (1.05 w typical) Compact rj-45 connector assembly Access to physical layer ic via 2-wire serial bus 1000 base-t operation in host systems with sgmii interface Description: Ap-gt1 1000base-t copper gbic transceivers are based on the gbic multi source aareement (msa). They are compatible with the gigabit ethernet and 1000base-t standards as specified in ieee std 802.32. The 1000base-t physical layer ic (phy) can be accessed via i2c, allowing access to all phy settings and features. The ap-gt1 uses the gbicí»s rx_los pin for link indication, and 1000base-x auto-negotiation should be disabled on the host system. The ap-gt1 is compatible with 1000base-x auto-negotiation, but does not have a link indication feature(rx_los is internally arounded). Standards: Compatible with gbic specification (sff-8053), rev 5.5compatible with ieee 802.3zcompatible with fda 21 cfr 1040.10 and 1040.11, class igeneral 3 years warranty

Tx-1310/rx-1550 nm single-mode bi-directional Sfp simplex connector (1000base-bx) 1.0625gbd fiber channel/1.25 gigabit ethernet Compliant with ieee802.3z gigabit ethernet Standard Compliant with fiber channel 100-sm-lc-l Industry standard small form pluggable (sfp) Package Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1

Tx-1310/rx-1490 nm single-mode bi-directional Sfp simplex connector 155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet Features: Compliant with sonet/sdh standard Compliant with fast ethernet standard Industry standard small form pluggable (sfp) Package: Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1

10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.

100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support

Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass