With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here. AP-SC49125-3CxL80 1.25 Gb/s RoHS Compliant CWDM Pluggable SFP Transceiver Product features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Uncooled DFB laser transmitter in 8 possible CWDM wavelengths Duplex LC connector RoHS compliant and Lead Free Up to 80 km on 9/125 Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation
1.25g cwdm-sfp-1490 optical transceiver. Dualfiber singlemode 1490nm 80km Features Dual data-rate of 1.25gbps operation 1490nm cwdm dfb laser and pin photodetector for 80km transmission Compliant with sfp msa and cwdm-sfp-1490 with duplex lc receptacle Digital diagnostic monitoring: Internal calibration or external calibration Compatible with rohs +3.3v single power supply Operating case temperature: Standard : 0 to +70+¼pc Industrial : -40 to +85+¼pc Applications Gigabit ethernet Fiber channel Switch to switch interface Switched backplane applications Outer/server interface Other optical transmission systems Description The sfp transceivers are high performance, cost effective modules supporting dual data-rate of 1.25gbps and 80km transmission distance with smf. The transceiver consists of three sections: a cwdm dfb laser transmitter, a pin photodiode integrated with a trans-impedance preamplifier (tia) and mcu control unit. All modules satisfy class i laser safety requirements. The transceivers are compatible with sfp single-source agreement (msa) . Information, please refer to sfp msa.
The cisco coarse wavelength-division multiplexing (cwdm) small form-factor pluggable (sfp) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy gigabit ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks. The cisco cwdm sfp solution is a convenient and cost-effective solution for the adoption of gigabit ethernet and fibre channel in campus, data-center, and metropolitan-area access networks. Arrange shippment on the receipt of payment Ship via fedex, dhl, ems and so on Expert package
10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC
Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC
Up to 11.3Gb/s data links CWDM EML transmitter and APD receiver Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
