Corundum brick (sintered corundum brick) with dense alumina clinker as raw material made of corundum brick. The brick has a high melting point, stable performance at high temperatures, room temperature and high temperature mechanical strength and wear resistance is good. Anti-metal erosion and anti-oxidation, superior performance. z
Copper Smelting furnace use High Alumina Corundum Fire Brick have stable quality and excellent durability.Copper Smelting furnace use High Alumina Corundum Fire Brick are made mainly of calcined alumina, mullite, corundum of high purity.Copper Smelting furnace use High Alumina Corundum Fire Brick have low porosity, excellent hot strength and creep resistance, and good volume stability at high temperature, Copper Smelting furnace use High Alumina Corundum Fire Brick have been developed to meet the most demanding specifications for various industrial applications. Brand Properties HT-98 HT-95 HT-90 HT-85 Chemical Composition (%) Al2O3% 98.5 95 90 85 SiO2% 0.3 3.0 9.0 13 Fe2O3% 0.2 0.2 0.5 0.5 Apparent Porosity (%) 18 18 18 20 Bulk Density (g/cm3) 3.1 2.95 2.9 2.75 Cold Crushing Strength (MPa) 90 80 80 70 Refractoriness Under Load (�ºC) 1700 1650 1650 1700 Permanent Linear Change (%) 0.1 0.2 0.2 0.3 Main Applications Carbon reactor furnace Pertrochemical furnace Industry ceramic kiln Refractory tunnel kiln Various high-temp Furnace Copper Smelting furnace use High Alumina Corundum Fire Brick 1.High refractoriness, 2.High-temperature endurable. 3.Good corrosion resistance. 4.Good spalling resistance and wear resistance. 5.Good thermal shock resistance. 6.High mechanical strength. 7.High-temperature creep rate is low. 8.Good volume stability at high temperature.
Corundum brick and chrome corundum brick is the petrochemical industry gas furnace and the furnace key refractory lining material. Corundum brick is α-Al2O3 as the main component of the special refractory material, has been widely used in high temperature, high pressure, chemical erosion and mechanical wear serious ammonia gasification furnace, ethylene engineering gas furnace, carbon black reactor and other important petrochemical heat The lining of the device. Chromium corundum brick is pure Al2O3 and Cr2O3 as the main raw material synthesis, compared with pure corundum brick, it has better performance, such as refractoriness, load softening deformation temperature, bending strength, high temperature creep, high temperature volumetric stability And resistance to slag corrosion.
Corundum brick and chrome corundum brick is the petrochemical industry gas furnace and the furnace key refractory lining material. Corundum brick is α-Al2O3 as the main component of the special refractory material, has been widely used in high temperature, high pressure, chemical erosion and mechanical wear serious ammonia gasification furnace, ethylene engineering gas furnace, carbon black reactor and other important petrochemical heat The lining of the device. Chromium corundum brick is pure Al2O3 and Cr2O3 as the main raw material synthesis, compared with pure corundum brick, it has better performance, such as refractoriness, load softening deformation temperature, bending strength, high temperature creep, high temperature volumetric stability And resistance to slag corrosion.
Chrome corundum brick is alumina - chrome oxide as the main raw material production of high-performance chrome corundum brick, has the characteristics of high refractoriness, great strength, good thermal shock stability, strong ability to resist erosion. Chromium corundum brick raw material is used by the ratio of alumina and chromium oxide according to certain proportion, go through high temperature melting synthesis of a solid solution. Using special refractory production technology made of refractory brick, can improve internal quality of the product, improve the high temperature performance of products. Feature 1.The refractory properties of chrome corundum brick In high purity corundum material add Cr2O3, no matter how much the amount, not only will not reduce the fire performance of materials can make refractory performance of material improved. 2.The strength of chrome corundum brick. The products in the process of burning, between particles and fine powder, between powder and powder are formed Al2O3 - Cr2O3 solid solution, calcium solid solution like bridge connect fine powder with particles together, make the strength of the material is greatly increased. 3.Thermal shock resistance Add Cr2O3 in corundum, when Cr2O3 content is 10% ~ 66%, material of thermal shock resistance decreased with increasing content of Cr2O3, namely the Cr2O3 content low chrome corundum brick, the thermal shock stability is better than Cr2O3 content high chrome corundum brick.
Corundum mullite poly light brick is a new type of energy efficient refractory material, can directly contact the flame, with high temperature, high thermal shock stability, high strength, small thermal conductivity and other characteristics. Widely used in ceramic roller kiln, shuttle kiln, cracking furnace, hot stove and a variety of electric furnace lining, door bricks, kiln tiles and so on. Characteristics 1.Low thermal conductivity, with a good thermal insulation effect 2.Low hot melt, due to low thermal conductivity, mullite series of light insulation brick accumulated little heat, in the intermittent operation of energy-saving effect is obvious 3.High purity,high refractoriness,and the high alumina content make it maintain good performance in a reducing atmosphere. 4.High thermal compressive strength 5. Extend the life of the lining 6.Could make in special shape to reduce the application amount of bricks. Al2O3 62 62 KO2+NaO20.10.08 Fe2O30.50.5 Bulk Density g/cm3 0.9 1.0 Cold Compressive Strength mpa 4.5 5.5 Refractoriness Under Load 1#1500 1500 Reheating liner change 15002h,0.1Mpa -1.5 -1 Refractorinessb 1700 1750
Quartzite Bricks
A brick is a type of construction material used to build walls, pavements and other elements in masonry construction. Block is a similar term referring to a rectangular building unit composed of clay or concrete, but is usually larger than a brick
Dear Customers, We can supply used/rejected Refractory in Bulk Currently we can supply 500 MT High Alumina bricks 20000 MT Mag Carbon Grog Contact us for more information
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications. Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries. Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability. Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
Insulation Bricks
Refractory Fire Brick
Gremlog Trading DMCC emerges as a pioneering force in the recycling landscape, offering recycled silica sand in sizes ranging from 0-1mm to 1-4mm. Leveraging the inherent advantages of repurposed silica-based spent foundry sands, Gremlog Trading DMCC champions sustainable practices within the metal casting industry. By providing recycled silica sand, Gremlog Trading DMCC contributes to energy conservation, reduces reliance on virgin materials, and delivers cost-effective solutions for both producers and end users. Gremlog Trading DMCC's recycled silica sand stands as a versatile resource, poised to revolutionize not only traditional applications but also industry-specific needs. At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries. Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
It is produced by foam coagulation technique. Features: 1. It has advantages with small bulk density, high cold crushing strength, and high refractoriness under load, small dimension tolerance and good thermal shock resistance. 2. It has the lowest and most stable thermal conductivity in various insulating refractory bricks. 3. It can reduce the total weight of furnace body and the thickness of furnace wall effectively, improve heat efficiency, lower energy consumption, improve work conditions and production efficiency, and considerable economic benefit can be obtained. Application: It is not only widely used in insulating layers of various of thermal processing equipments, such as hot blast furnace, coke oven, glass kiln, etc, but also apply to linings in parts of furnace without strong high-temperature molten material erosive. Item High Alumina Insulating LG-1.0 LG-0.9 LG-0.8 LG-0.7 LG-0.6 LG-0.5 LG-0.4 Al2O3 % 48 Fe2O3 % 2.0 Bulk Density g/cm3 1.0 0.9 0.8 0.7 0.6 0.5 0.4 Cold Crushing Strength Mpa 3.92 3.43 2.94 2.45 1.96 1.47 0.78 Thermal Conductivity Coefficient w/m.k 0.45 0.45 0.35 0.35 0.3 0.25 0.20 Test Temperature of Permanent Linear Change Rate 2% C 1400 1400 1400 1350 1350 1250 1250
