Model: SC200/200
Rated loading capacity: 2 x 2,000kg
Rated hoisting speed: 34.4m/min
Basic height: 50m
Max. hoisting height: 150m
Mast section dimensions: 0.65 x 0.65 x 1.508 m
Cage inner size: 3 x 1.3 x 2.3m
Electric motor model: YZZ132M-4
Power: 11 x 3 x 2kW
Reducer center-to-center distance: 125mm
Transmission ratio: 1:16
Safety device: form inching type
Working speed: 51.6m/min
Braking torque: í¦3,000N.m.
Mast section specifications are devided into three specifications as follows:800*800*1508,
650*650*1508 and 900*650*1508.Types of structure have SCD dual drive,counter weight,no counter weight of SC treble drive,GN3,upper-setting and frequency conversion control,etc,varieties.
The equipment is applicable to bridges,chimneys,mansions of more than 60m,etc,construction staff and material handling of tall building,also which is used for warehouse and wharf,etc places and for vertical transportation too.
SC200/200 Frequency Construction hoists
Height m
300
Rated load kg 2000/2000
Maximum capacity
009/009
Boom lift wweight kg 200
Lifting speed m/min 0-40 0-45 0-55 0-66
Electormotor Model
YZEJ132M(L)-4
Power
kw 15 2/15 2 11 3/11 3 15 3/15 3 18.5 3/18.5 3
Speed-limiter Model
SAJ40-1.2A SAJ40-1.4
Rated tripping speed m/s 1.2/1.4
Standard motion speed m/s 1.1/1.35
Rated automaticload KN
40
Type
gradual
Reducer Model
SWC1 TU68T TU66T
Center distance mm 125
Speed radio
1:12 1:10
Bracking distance m 0.3-1.2
Mast section dimension mm 650 650 1508
Crane cage inner net dimension m 3.0 1.2.2 3.21.5 2.2
Guardrail dimension m 5.53 3.421.82 5.93 3.62 1.82
Hoistway dimensions m
Free end height of the guide rail frame m 9
Gounterweight weight kg
Direct attached frame Installing interval m/set 006-9
Distance between two embedded parts mm 1488
Installation dimensions from center of rail frame to building wall mm 2800-3200
Safe and protection system Upper and below limited switches,upper and below limit utmost switches,gate limited switch,falling avoiding safe device,cushion device,safe lock of gate,counterweight rope breaking or loose protecting device,safe hook,The safety device against overload,Anti-punching standard section etc.
VEICHI provides OEM/ODM Service for TOP Customers.
The AC70S special drive for construction elevators is a drive specially designed for the transformation of old elevators with a position stop function. It integrates a frequency converter, brake module, and status indicator. It is convenient for on-site maintenance of equipment and reduces the cost of construction elevator frequency conversion transformation.
Product Advantages
1. Safe and reliable: The special brake logic control function, through the release frequency and the release current colleague to reach the brake, to ensure its safety and reliability.
2. High performance-price ratio: Compared with a complete set of inverter cabinets, the price is cheaper and the performance is equivalent.
3. Humanized design: No need to change the inverter parameters, as long as the wires are correctly connected, it can operate normally after turning on the machine.
4. The transformation is simple: no need to add deceleration limit devices, no replacement of the operating table; accurate landing can be achieved at any speed.
5. Convenient maintenance: The keyboard operator can display upper and lower limit, ascending and descending signals, which is convenient for system maintenance.
Applications Construction elevator
Voltage frequency: Three-phase 380V 50/60Hz Three-phase 220V 50/60Hz
The output voltage: Output under rated conditions: 3 phases, 0 input voltage, error less than 5%
Output frequency range: 0~120Hz
Item: sc100 construction elevator
Rated capacity:1000kg
Number of people:12
Rated lifting speed:36m/min
Max.Lifting height:200m
Suspension cage inner size:3
Weight of 650 standard section:124kg
Dimension of 650 standard section:650
Suspender loading capacity:200kg
Dimension of 800 standard section:800
Nude packing delived in 40hq and 20gp
401693 Construction Elevator Suppliers
Short on time? Let Construction Elevator sellers contact you.
SC series Building Hoist adopted computer aided design. Comparing with traditional buiding hoist, it is attractive, light, easy to handle, secure, applicable and popular. Depending on special needs of regular or irregular sections, the lifting capacity can reach 1~2 tons and the running speed can reach 28~38m/min. Moreover, VVVF speed regulation and PLC enable0~68 limitless speed, automatic layer selectingand levelingas required. SC series Building Hoist is excellent in technical performance, more secure in operating mechanism and more compact on structure.
Hunan Yunji Zhilian Technology Co., Ltd.
The company is located in Changsha, Hunan, the world's capital of engineering machinery. It is China's leading exporter, importer and manufacturer of large-scale engineering machinery equipment. We provide you with the most prestigious Chinese engineering machinery and industrial products and high-tech electronic products. Our main products include second-hand tower cranes, construction elevators, crawler cranes, truck cranes, loaders, and the development and production of new electric forklifts, small excavators including electronic LCD blackboards and other high-tech electronic products.
We have developed an Internet platform for engineering machinery leasing and second-hand machinery transactions, providing platform information services for engineering machinery leasing manufacturers and second-hand engineering machinery. It plays a role in reducing costs and increasing efficiency for customers' business and work. The number of Chinese engineering machinery manufacturers and practitioners who have been served is: 100,000 units and individual person-times. The number of private construction enterprises, central enterprises and state-owned enterprises in the Chinese construction industry that have been served is 10,000 units. The total amount of service contracts is more than 1 billion yuan.
The main content of our main service is to provide you with advice and guidance when you make a purchase decision, and to provide you with more cost-effective and high-quality supply product options. This service will save you a lot of time, manpower and financial resources to find the most suitable high-quality products for you with higher efficiency. We also provide the following services in China: 1. Arrange visits to production facilities of potential suppliers 2. Explain China's tariff and export policies and regulations 3. Export products 4. Transport China's construction machinery is becoming more and more advanced in technology and practicality.
Hunan Yunji Zhilian Technology Co., Ltd. has rich experience in the supply and trade of construction machinery and high-tech products such as electric forklifts, tower cranes, electronic LCD blackboards, etc., and has won a good reputation in the market with high-quality supply and after-sales service team. Some products are exported to Russia, Belarus, Pakistan, South Korea, Mongolia, Vietnam, and other countries, and the business covers Southeast Asia, the Middle East, Asia, and Europe. We are customer-centric and serve a large consumer group.
Modelsc100 - ordinary motor
Payload capacityup to 1, 000 kg
Speed33 m/min
Max. Lifting height150 m (increased lifting height on request.)
Cage width (internal)1.3 m & 1.5 m
Cage length (internal)3 m
Cage height (internal)2.2 m
Motor controldirectly driven without inverter
Motor power2 x 11 kw
Safety devicemechanical interlocking door system to guarantee the highest safety standards.
Power supply range380v, 50 or 60 hz, 3 phase
Type of mast650mm, tubular steel with integrated rack
Length mast section1.508 m
Weight mast section with 1 rack128 kg
S5300-ce is designed for the construction of load characteristics and control requirements of a specially developed integrated control of a dedicated inverter.
Integrated construction elevator electrical logic, frequency control, brake power, overload protection, increase text display, voice broadcast, floor call, automatic leveling, gprs function. To meet the energy-saving, low-speed and medium-speed construction lifts in the high-end application requirements.
Specification:
Integrated
Integrated electrical logic control, variable frequency control, brake unit, overload protection, brake power, elevator control cabinet to achieve protection and protection functions;
Safe and reliable
Lifting special holding brake control;
Pre-excitation and torque verification function, to prevent slip car;
Zero detection, to prevent misuse of the joystick;
Dozens of fault protection, deal with all kinds of unexpected situations;
The SC/SCD series construction hoists that we produced are driven by gear and rack. By using advanced technology both at home and abroad, combing theory with practice and improving and innovating continually, it has a reasonable structure, simple operation, and beautiful appearance consequently. Its type includes three-driven, dual-driven, interior mounting and exterior mounting. And this product has no counterpoise, dismantling easily and working safely.
The specifications are as follows,
Rated loading capacity+¬2000*2 Kg
Hoisting speed+¬33 m/min
Max lifting height+¬150 m
Rated passenger capacity+¬ 24*2 person
Inner dimension of cage+¬ 3*1.3*2.2 m
standard size of mast section+¬650*650*1508 mm
Model of fall arrestor+¬SAJ3.0*1.2 / SAJ4.0*1.2
Working voltage+¬ 380f+50HZ V
Power of motors+¬11*3/11*2 Kw
Aggregates are mixtures of sand, gravel, crushed rock or other bulk minerals used in construction, principally as a component of concrete, and in civil engineering. At CEMENTATION we supply aggregates for a range of core applications, from fill materials to aggregates that can be used in concrete, precast concrete, asphalt and for surface dressing. Aggregate plays an important role in concrete and construction part. We supply quality material which makes durable concrete with higher compressive strength and low permeability having better finish. We can supply a wide range of coarse, fine and blended aggregates in accordance with international standards.
We acquire rock mines and stone crushing plants and enable us to fulfil contract of any size. Progressive stages if crushing and screening enable us to produce a range of aggregate sizes (06mm to 65mm)
APPLICATIONS
Road and Highway surfaces
Constructions or Civil work
Railway Ballast
To make Concrete or Asphalt
Filling
The CORI is the product for the direct reduction unit:
First, it will be stored in product passivation silos, its transportation by conveyors. After that, it will be stored in the warehouse for further use.
Production rate fo312 T/H. Assuming 8,000 hours of annual
operation, this equates to in annual production of 2,500,000 tonnes.
-IRON: (Rod a Benton):Hot-rolled product in multipurpose steel for high-adherence construction, weldable in RB 500 grade. NA 8634(2015) and ISO 6935-2 (2015). Diameter:
A wide range of diameters: 8,10,12, 14, 16,20,25,32,40 mm.
Length :12m (-0mm +100mm) with the possibility of making specific lengths of less than 12m according to customer demand for diameters ranging from 8mm to 16mm.
12m to 18m for diameters ranging from 16mm to 40mm.
Marking :
A specific AQS marking is engraved on the rebar bars for the diameters: 8,10,12,14,16mm And the identifying code AQS-diameter-RB500 for the diameters: 16,20,25,32,40mm
- Portland Cement 42.5 (Bags, Bulk)
-Wire rod: of round section with a diameter varying between 5.5 mm to 14 mm, of high quality.
The round and smooth wire rod is obtained by hot rolling in accordance with the Algerian standard an 8634 and according to international standards.-The Fields Of Use Of Wire Rod Are As Follows:- Drawn Wire-Welded Mesh-Nail, Tie Wire, Galvanized Wire- Gabions- Barbed Wire-Spring Wire- Bolt-Nut-Screw- Paperclips-Pickup Wire-Welding Wire
-BILLET: A billet is a section of metal used to roll into bars and shapes. It can be produced with ingots or directly by continuous casting. Billets are used as raw materials or for extrusion, forging, rolling and other metal processing operations.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
401693 Construction Elevator Suppliers
Short on time? Let Construction Elevator sellers contact you.
