VEICHI provides OEM/ODM Service for TOP Customers.
The AC70S special drive for construction elevators is a drive specially designed for the transformation of old elevators with a position stop function. It integrates a frequency converter, brake module, and status indicator. It is convenient for on-site maintenance of equipment and reduces the cost of construction elevator frequency conversion transformation.
Product Advantages
1. Safe and reliable: The special brake logic control function, through the release frequency and the release current colleague to reach the brake, to ensure its safety and reliability.
2. High performance-price ratio: Compared with a complete set of inverter cabinets, the price is cheaper and the performance is equivalent.
3. Humanized design: No need to change the inverter parameters, as long as the wires are correctly connected, it can operate normally after turning on the machine.
4. The transformation is simple: no need to add deceleration limit devices, no replacement of the operating table; accurate landing can be achieved at any speed.
5. Convenient maintenance: The keyboard operator can display upper and lower limit, ascending and descending signals, which is convenient for system maintenance.
Applications Construction elevator
Voltage frequency: Three-phase 380V 50/60Hz Three-phase 220V 50/60Hz
The output voltage: Output under rated conditions: 3 phases, 0 input voltage, error less than 5%
Output frequency range: 0~120Hz
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes
Shopping Bags
Model: SC200/200 Rated loading capacity: 2 x 2,000kg Rated hoisting speed: 34.4m/min Basic height: 50m Max. hoisting height: 150m Mast section dimensions: 0.65 x 0.65 x 1.508 m Cage inner size: 3 x 1.3 x 2.3m Electric motor model: YZZ132M-4 Power: 11 x 3 x 2kW Reducer center-to-center distance: 125mm Transmission ratio: 1:16 Safety device: form inching type Working speed: 51.6m/min Braking torque: í¦3,000N.m.
Mast section specifications are devided into three specifications as follows:800*800*1508, 650*650*1508 and 900*650*1508.Types of structure have SCD dual drive,counter weight,no counter weight of SC treble drive,GN3,upper-setting and frequency conversion control,etc,varieties. The equipment is applicable to bridges,chimneys,mansions of more than 60m,etc,construction staff and material handling of tall building,also which is used for warehouse and wharf,etc places and for vertical transportation too.
Supplier: Blanket, tissue, luggage bags, abs trolley bags, cosmetic items, soap, face wash, face cream, shower gel, anti bacterial soap, hand wash, shampoo, hair conditioner, hair oil, body lotion, hand & body cream, facial cleanser, care soap, petroleum gel, glycerin soap, baby soap, hand sanitizer, all purpose sanitizer spray, multi surface disinfectant spray, hair gel, dishwashing liquid & kitchen cleaner, detergent powder & contact adhesive, sprayable contact adhesive, pir pur phenolic boards, hvac adhesive, wood adhesive, casbon value+, casbond wood glue, flooring adhesive, vinyl flooring adhesive, flooring adhesive, polyurethane flooring adhesive, casbond pufix 71, gps silicon sealant, top seal ms 870 high grab, weather sealant,. we are certified iso 17025, 22716:2007,9001 2015.
Services: Clearing agents, transportation & shipment
Quick Details Applicable Industries: Construction works After Warranty Service: Field maintenance and repair service Local Service Location: None Showroom Location: None Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: Ordinary Product Warranty of core components: 1 Year Core Components: Motor Condition: New Place of Origin: Shandong, China Brand Name: Fangyuan Rated Loading Capacity(kg): 2000/2000 Hoisting Speed: 33m/min Max Lifting Height:200m Dimension(L*W*H): 650*650*1508 Loder Weight:2000kg After-sales Service Provided:Field installation, commissioning and training, Engineers available to service machinery overseas Warranty:1 Year UNIQUE SELLING POINT:High operating efficiency Name:SC200 double cages construction site lift elevator Color:Orange Type:SC200/200 Usage: Construction Elevating Equipment Application:Construction Usage Max lifting height:150/300m Lifting speed:33m/min Passenger:9 person Rated motion speed:1.2m/s
Technical parameters Unit SC200/200 Frequency Construction hoists Height m 300 Rated load kg 2000/2000 Maximum capacity 009/009 Boom lift wweight kg 200 Lifting speed m/min 0-40 0-45 0-55 0-66 Electormotor Model YZEJ132M(L)-4 Power kw 15 2/15 2 11 3/11 3 15 3/15 3 18.5 3/18.5 3 Speed-limiter Model SAJ40-1.2A SAJ40-1.4 Rated tripping speed m/s 1.2/1.4 Standard motion speed m/s 1.1/1.35 Rated automaticload KN 40 Type gradual Reducer Model SWC1 TU68T TU66T Center distance mm 125 Speed radio 1:12 1:10 Bracking distance m 0.3-1.2 Mast section dimension mm 650 650 1508 Crane cage inner net dimension m 3.0 1.2.2 3.21.5 2.2 Guardrail dimension m 5.53 3.421.82 5.93 3.62 1.82 Hoistway dimensions m Free end height of the guide rail frame m 9 Gounterweight weight kg Direct attached frame Installing interval m/set 006-9 Distance between two embedded parts mm 1488 Installation dimensions from center of rail frame to building wall mm 2800-3200 Safe and protection system Upper and below limited switches,upper and below limit utmost switches,gate limited switch,falling avoiding safe device,cushion device,safe lock of gate,counterweight rope breaking or loose protecting device,safe hook,The safety device against overload,Anti-punching standard section etc.
Modelsc100 - ordinary motor Payload capacityup to 1, 000 kg Speed33 m/min Max. Lifting height150 m (increased lifting height on request.) Cage width (internal)1.3 m & 1.5 m Cage length (internal)3 m Cage height (internal)2.2 m Motor controldirectly driven without inverter Motor power2 x 11 kw Safety devicemechanical interlocking door system to guarantee the highest safety standards. Power supply range380v, 50 or 60 hz, 3 phase Type of mast650mm, tubular steel with integrated rack Length mast section1.508 m Weight mast section with 1 rack128 kg
