Colombia Cell Storage Liquid Nitrogen Tank Kgsq Suppliers and Manufacturers

The liquid nitrogen tank is a low-temperature container that can only store liquid nitrogen and cannot store other liquids. It is mainly composed of inner and outer gallbladders, neck tubes, neck plugs, and buckets. They play different functions in different positions. So what functions does our liquid nitrogen tank neck plug have? What will happen if we accidentally forget to cover the neck plug during operation? You should know that the neck plug is made of polyurethane foam and is used to block the neck of the liquid nitrogen container to reduce the evaporation of liquid nitrogen and play a role in preserving liquid nitrogen. It is light and pressure-free, not easy to break, does not fall off, and can also fix the bucket without adsorbing liquid nitrogen. If you forget to cover the neck plug during use,there will be three situations,the third situation is dangerous. 1. Liquid nitrogen volatilizes in large quantities Liquid nitrogen is a low-temperature liquid that is easily volatile at -196�°C.It will evaporate more quickly when exposed to heat. The liquid nitrogen tank is designed to better isolate heat,so that liquid nitrogen can be stored for a long time.The neck plug is made of polyurethane foam, which is not easy to break and has good thermal insulation properties and can isolate most of the heat. If you forget to cover the neck plug,hot air will enter through the mouth of the tank and accelerate the evaporation of liquid nitrogen.If there are samples stored in the tank,the safety of the samples will be affected and the samples may become inactive. Therefore,when we find that we have forgotten to cover the neck plug,we must first measure the height of the liquid nitrogen in the tank,refill it,and then cover the neck plug. 2. Liquid nitrogen will be contaminated Another function of the neck plug is to prevent impurities or bacteria from falling into the tank. If you forget to cover the neck plug, bacteria and impurities will inevitably fall into the liquid nitrogen tank and contaminate the liquid nitrogen and stored biological samples. 3. Decreased indoor oxygen content Usually, liquid nitrogen tanks are placed indoors. Liquid nitrogen will volatilize more quickly when heated. If the room is not well ventilated, the nitrogen content in the air will increase and the oxygen content will decrease, which may cause the risk of "suffocation". Therefore, Liquid nitrogen tanks stored indoors must be well ventilated. If you have any needs, please contact KGSQ liquid nitrogen tank:

In laboratories and scientific research institutes, experimental samples and cells often need to be stored in a low-temperature environment for a long time. There are many cryogenic containers on the market, and laboratory liquid nitrogen tanks stand out and are entrusted with reuse. This is because the laboratory liquid nitrogen tank has such advantages. It is made of aviation aluminum, which has strong hardness, light weight, long-term durability and no deformation; large-diameter design facilitates sample pickup and placement; large capacity, stable and safe storage of samples; multi-layer insulation Vacuum design effectively reduces the volatilization of liquid nitrogen; it can meet the different needs of different workers. Although, there are ways to use laboratory liquid nitrogen tanks. 1. Before use It should be placed in a well-ventilated room, away from fire sources, electrical equipment, moisture-proof, and shaded; Avoid storing in places where the temperature is too high or too low, and the humidity is too high or too low; Check the sealing of the liquid nitrogen tank to see if there is air leakage. If there is any abnormality, contact after-sales service in time; 2. When using Use caution when adding liquid nitrogen. New jars should be filled slowly and pre-cooled to prevent the liner from cooling too quickly and reducing its service life; When filling liquid nitrogen, do not pour liquid nitrogen on the vacuum exhaust port to avoid a decrease in vacuum degree; The neck plug is made of thermal insulation material, which can not only prevent the evaporation of liquid nitrogen, but also play a role in fixing the lifting cylinder; Check frequently. If frost is found on the surface of the tank, stop using it; 3.After use Liquid nitrogen tanks should be placed on a stable and flat ground, away from direct sunlight and high temperature environments; When not in use for a long time, it should be cleaned and stored to prevent sample residue from corroding the tank wall and affecting the service life; It is recommended to place it in a well-ventilated area and regularly check the insulation performance of the tank; In short, the role of liquid nitrogen tanks in the laboratory is irreplaceable, but their correct use is crucial. During the operation, you must not only pay attention to the storage of the liquid nitrogen tank, but also the addition and correct use of liquid nitrogen to ensure the safety of staff and samples.

Frozen embryos are one of the prerequisites for implementation, the other is the cultivation of embryos. After the eggs and sperm are completely extracted, in order to ensure the viability of the eggs and sperm, they will immediately enter the cryopreservation stage, suspend their life activities, and then complete insemination in an external culture system to complete the embryo development. After the embryo is transplanted into the uterus, it still needs to be stored at low temperature. The method of preservation is to put it into a low-temperature medium - liquid nitrogen. Since the temperature of liquid nitrogen is much lower than normal temperature, organisms in direct contact will be frozen. Otherwise, the plastic will be frozen brittle. In order to ensure the vitality of the sperm and egg "combination" embryo, a special liquid nitrogen container is needed to store it. We can also call it an embryo storage tank, because it is used for embryo storage at this time. The embryo storage tank is composed of two layers: an inner and outer bladder. The inner and outer layers are insulated by a vacuum. It has good thermal insulation and can reduce liquid nitrogen consumption. Even so, the liquid nitrogen balance and temperature in the tank need to be tested every day to ensure that the ambient temperature of the cryopreserved embryos is normal and stable. In order to ensure the safety of the embryos and improve work efficiency, we can install a liquid level alarm, which can detect the liquid level in the tank. When the ambient temperature reaches the upper and lower limits, an alarm will sound to remind the staff to replenish liquid nitrogen in time. It also supports text messages. , telephone, and email alarm functions. The addition of a liquid level alarm can avoid embryo loss caused by insufficient liquid nitrogen. This safety measure ensures the safety of the embryonic baby to a certain extent, preventing the embryonic baby from being harmed by the external environment and receiving the same careful care as in the mother's body. It not only improves the success rate of IVF, but also improves the efficiency of laboratory work management. Moreover, using embryo storage tanks to freeze embryos ensures their vitality during the period between the completion of cultivation and delivery to the mother, reducing damage to the embryos due to temperature changes, etc., and ensuring the success rate of IVF.

In biological sample centers or scientific research institutions, there are a large number of cells, strains, vaccines and other samples that need to be cryopreserved. The scientific research of these samples is of great significance, and their safety cannot be ignored. In addition, there are requirements for batch management and data collection. Vapor phase liquid nitrogen tanks are often chosen over aviation aluminum Dewars. Vapor-phase liquid nitrogen tank, also known as "stem cell liquid nitrogen tank", is named after it is often used to establish stem cell banks. It is different from ordinary liquid nitrogen containers. It has two storage modes: gas phase and liquid phase. The sample storage method is unconventional and its working principle is break the usual. Sample storage methods in gas phase liquid nitrogen tanks: Partition management, gas phase preservation! The inner tank of the stem cell liquid nitrogen tank is divided into two areas. The upper area is for samples, which is the storage area for stem cells, embryos, bacteria, etc.; the lower area is for liquid nitrogen storage only and does not contain any samples. The bottom position, which is the liquid nitrogen storage area, is equipped with an evaporator to provide evaporated nitrogen for sample storage to cool down. The sample is only "close" to the liquid nitrogen, but does not touch it, and the volatilized low-temperature nitrogen is used to store the cells. Working principle of gas phase liquid nitrogen tank: The principle is actually very simple, such as the use of liquid nitrogen evaporation cooling mentioned above! When the nitrogen in the sample storage area is insufficient to support the sample demand, the bottom evaporator starts working to supply liquid nitrogen to the upper part. This has the advantage of avoiding sample cross-contamination. The reason why I donâ??t mention its other storage mode - liquid phase is because the liquid nitrogen reserve in the container is large, much higher than that of conventional liquid nitrogen containers, and the evaporation loss of stainless steel is higher than that of aluminum alloy. When storing in liquid phase, replenish the liquid. Frequent and troublesome, difficult to use, only gas phase storage is recommended. In addition, the gas-phase liquid nitrogen tank also has high dual-gallery vacuum + high thermal insulation performance, which reduces heat conduction, reduces the evaporation rate of liquid nitrogen, and maintains stable pressure inside the tank. The built-in intelligent control management system is used for real-time detection and abnormal warning of temperature, pressure and liquid level to ensure the stability of the tank and the safety of stem cells. If you have any needs, please contact KGSQ liquid nitrogen tank:

The use of liquid nitrogen tanks covers scientific research, animal husbandry, gourmet food, beauty, refrigeration accessories and other industries, but it is mainly used for the preservation of biological samples. Preserved biological samples can be subdivided into two major categories, animal semen and experimental cells. The two usages are suitable for different containers and each has its own characteristics. Frozen semen storage should be used with a round bucket; in addition to different accessories, cell storage also has many differences such as capacity and caliber! So what are the characteristics of laboratory liquid nitrogen tanks? First, the capacity must be large; Most of the cells preserved in the laboratory are needed for project research or scientific research, and they are large in number and of various types. They need to be stored stably for a long time, and small-capacity jars have limited storage space, making it difficult to store them in categories and difficult to find. Therefore, laboratories use cell storage tanks of more than 30 liters. Secondly, the diameter must be large and equipped with a freezing rack; As mentioned earlier, there are many types and quantities of experimental cells. In order to facilitate experimenters to find and manage samples, they can be used in conjunction with square buckets to store cells in a regular manner and make them easy to find. Correspondingly, it is also subject to the restrictions of square buckets, and a wide-neck liquid nitrogen tank with a mouth of 125mm or more must be used. Finally, it is equipped with a locking cover to ensure cell safety; Laboratory personnel come and go. For the sake of sample safety, to avoid accidentally taking or losing them, they are usually equipped with locking covers and safety locks to ensure cell safety. Note: The lock cover of the cell storage tank is standard, but the lock needs to be purchased by yourself!

At present: liquid nitrogen tanks are common low-temperature containers in laboratories and are often used to preserve specimens, samples, cells, etc., which require the constant temperature characteristics of liquid nitrogen tanks. Speaking of which, here comes the question. Many people will ask what size of liquid nitrogen tank should be used in scientific research laboratories? Laboratory liquid nitrogen tanks are generally larger than 30 liters. There are two reasons: 1. Consider capacity The capacity of liquid nitrogen tanks ranges from 2 to 175 liters. Different capacities can store different numbers of samples. The larger the capacity, the more samples can be stored. For laboratories, there are many people who freeze samples, with a wide variety and large quantities. Therefore, it is recommended to choose a jar of more than 30 liters, which can store a variety of samples without the need for frequent refills. 2. Consider caliber There are 6 options for liquid nitrogen tank diameter,50mm,80mm, 125mm, 127mm,210mm,216mm; There are many types and large quantities of samples stored in the laboratory. Freezing racks are often used for matching. If the diameter is too small, it will not fit in. Therefore, it is recommended to use a diameter of 125mm or above. A larger diameter makes it easier to take samples and is used with a freezing box. More samples can be saved. To sum up, liquid nitrogen tanks used in laboratories generally have a capacity of more than 30 liters and a diameter of more than 125mm. But the important thing is to choose based on your actual needs. If you have any needs, please contact KGSQ liquid nitrogen tank: